Flow: 0 m³/h - 90 m³/h
Pressure: 0 bar - 8 bar
Head: 10'00" ft - 150'00"
... Available in pure PP or E-CTFE+carbon Magnetic version for clean liquids The integral version (instead of the common plastic flanges) and the armored version (instead of the cast-iron) both allow ...
Flow: 2 m³/h - 50 m³/h
Pressure: 8 bar
Head: 0 m - 40 m
EQUIPRO series is made of plastic technopolymers, close-coupled with an inlet pipe at the bottom and outlet pipe at the top. These pumping solutions ensure a longer life cycle and less maintenance operations. Compact ...
Flow: 1.3 l/min
Pressure: 7, 238 bar
Weight: 16 kg
... steel protection Plastic finishing Main materials Anti-rust Fixatives Base coat Fireproof Intumescents Lacquers Mordants Primer Water / Solvent based products Single or double components protective coating Epoxy ...
Flow: 8 l/min
Pump-it® canister pumps are designed for emptying canisters and small barrels up to 60 l rapidly and cleanly. The hand pump is used to create an overpressure that forces ...
Compact, self-priming polypropylene lever pump suitable for light acids and bases. The telescope tube for lever pump is steplessly extendable up to 100 cm, which means it can be used ...
... piston pump is made of polypropylene and polyethylene, for watery and petrochemical products. It represents value-for-money. The piston pump is attached to the container which is to be ...
Flow: 56 l/min
Power: 220 W
EuriPump pumps • self-priming vane pump • simple and robust design • easy handling due to low weight • with anti-siphon device • 4 m supply hose as standard • additional hose from 6 to 10 m - ...
Eurial
Flow: 40 l/min
EuriPump pumps • self-priming vane pump • simple and robust design • easy handling due to low weight • built-in protection filter • 4 m supply hose as standard • additional hose from ...
Eurial
Flow: 50 l/min
EuriPump pumps • self-priming vane pump • simple and robust design • easy handling due to low weight • built-in protection filter • 4 m supply hose as standard • additional hose from 6 to 10 m ...
Eurial
Flow: 0 us gal/min - 5 us gal/min
Length: 191 mm
Width: 139 mm
... non-stalling, lube-free air valve system in Versamatic’s ¼" (6mm) plastic air-operated double-diaphragm (AODD) pump. Engineered with original equipment manufacturers (OEMs) in mind, this AODD pump ...
Versa-Matic
Flow: 0 us gal/min - 6.8 us gal/min
Weight: 1.4, 2.04 kg
Small yet powerful, Versamatic’s ⅜" (10mm) bolted plastic air-operated double-diaphragm (AODD) pump can pump up to 6.8 gpm (26 lpm). Featuring a patented air valve ...
Versa-Matic
Flow: 0 m³/h - 12 m³/h
Length: 215 mm
Width: 185.75 mm
... AODD pump, along with the ½" bolted plastic pump, features: A corrosion-resistant air section On/off reliability Durable and long-lasting construction ...
Versa-Matic
Flow: 50 l/min
Pressure: 8 bar
Pneumatic membrane pump, PP body Descriptive Specifications and advantages Specially designed to transfer aggressive and/or viscous chemical liquids. Plastic pumps ...
Pompes Japy
Flow: 1.59 m³/h
Pressure: 1.4 bar - 6.9 bar
Head: 6, 4.5 m
... advantages Pumps designed for the transfer of aggressive and/or viscous liquids. Plastic pumps are recommended for strong acids and for bases. Dry self-priming pumps. ...
Pompes Japy
Flow: 20 l/min
Pressure: 7 bar
... Pneumatic membrane pump Descriptive Construction materials Body: PP Membranes: Santoprene® Specifications and advantages Pumps designed for the transfer of ...
Pompes Japy
Flow: 10 l/min - 130 l/min
Pressure: 0.2 bar - 0.8 bar
Head: 1 m - 8 m
... motor 230V/50Hz with incorporated thermal protection with automatic reset. MWater cooled motor with top discharge protects the pump from overheating even when partially submerged. Liquid temperature in continuous operation ...
Flow: 0 m³/h - 15.6 m³/h
Head: 0 m - 16 m
Power: 1.1 kW
CTV 25-11 PLASTIC CTV 25-11 is a 1" vertical pump in PP or PVDF with 1.1 kW motor, capacity of 15.6 m3/h and max head of 16 m. Performance curve The performance curves are based on ...
Tapflo
Flow: 0 m³/h - 28.5 m³/h
Head: 1 m - 19 m
Power: 0.75, 1.1, 3, 4 kW
CTP PLASTIC PUMPS COMPACT AND RELIABLE MECHANICALLY SEALED PUMP The CTP pumps are semi open single stage centrifugal pumps. Since ...
Tapflo
Flow: 0 l/min - 11 l/min
Pressure: 8 bar
Head: 0 m - 80 m
... ATEX version) are the smallest in the range of PE & PTFE diaphragm pumps. Ideal for dosing applications and pumping to small containers. The small size grants is also space saving in compact ...
Tapflo
Flow: 8, 10 us gal/h
Constructed of sturdy ABS plastic with comfort grip handle providing smooth, firm strokes. Available in 24" (610 mm) with hose and 48" (1220 mm) with hose.
Flow: 0 l/min - 1,400 l/min
Head: 13.5 m - 74 m
Power: 1.5 kW - 15 kW
... contact surfaces in the front and rear areas of the pump. Therefore high temperatures are avoided. This greatly improves resistance against dry running in comparison with conventional mag. drive fluororein ...
Flow: 0 l/min - 1,400 l/min
Head: 13.5 m - 70 m
Power: 0.4 kW - 15 kW
... contact surfaces in the front and rear areas of the pump. Therefore high temperatures are avoided. This greatly improves resistance against dry running in comparison with conventional mag. drive fluororein ...
Flow: 14, 16, 17, 20 l/min
Pressure: 0 Pa - 350,000 Pa
Power: 180 W - 220 W
... turbine pumps With the MDT series mag. drive turbine pumps made of plastic are available. Discharge pressures up to 0.35 MPa are attainable. Thanks to the seal less construction, leackage ...
Flow: 35 l/min
Pressure: 1 bar - 4 bar
Length: 140 mm
Pneumatic, selfpriming rotary vane pump for the transfer of petrol, with body in cast iron with anticorrosive coating and plastic rotor. Earth cable to enable an electrostatic discharge on demand. The ...
Flow: 1,000 m³/h
Head: 120 m
Power: 250 kW
... heavy-duty plastic pumps Based on innovative strength and over 60 years of expertise in the use of thermoplastics, we have set a new milestone in the shape of a future-oriented, efficient and reliable ...
ASV Stuebbe GmbH & Co. KG
Flow: 235 m³/h
Head: 68 m
Power: 30 kW
STÜBBE E-CLASS: entry-level model in the STÜBBE pump family horizontal, single-stage centrifugal chemical plastic pump with mechanical seal in monobloc design (not self-priming) efficient ...
ASV Stuebbe GmbH & Co. KG
Flow: 130 m³/h
Head: 42 m
Power: 11 kW
Horizontal single-stage spiral cased pump Shaft sealing through single or double acting mechanical seal Circulation, rinsing, quench or barrier medium depending on application Made of sturdy plastic ...
ASV Stuebbe GmbH & Co. KG
Flow: 1.6 l/min - 25 l/min
Pressure: 0 bar - 10 bar
Head: 0 m - 100 m
The gear pumps of the PM series have a wide range of models that allow the transfer of flow rates ranging from 25 l / min to 280 l / min. This type of pumps are suitable for use in the most diverse sectors ...
Flow: 0.1 l/min - 0.5 l/min
Pressure: 0 bar - 10 bar
Head: 0 m - 100 m
Flow: 23.2 l/min
Pressure: 20 bar
Power: 1.02 ch
Semi-hydraulic two-diaphragm pump, for use in the gardening or semi-professional agricultural sectors. Trolley-mounted in combination with electric motors or internal combustion engines for gardening, and small ...
Annovi Reverberi
Flow: 60 m³/h
Pressure: 6 bar
Power: 9.2, 7.5, 3, 5.5, 4 kW
The helicoidal pump KIBER KTE is a progressive cavity pump with a hopper and endless screw feeder, compact and robust design used for decanting the viscous products, masses, pastes and ...
Flow: 55 l/min
Pressure: 300, 200 bar
PUMP SYTEM WITH DIAPHRAGM PUMP If necessary fuel or other hazardous substances must be pumped out or pumped around for safety and environmental reasons. Jessberger has developed a flexible emergency ...
Flow: 3 m³/h - 18 m³/h
Head: 4.7 m - 16.5 m
Power: 0.45 kW - 1.1 kW
... Construction Self-draining, single-impeller pumps, with motor insulated from pumped water, constructed with high quality, corrosion-proof plastic materials, with stainless steel diffuser. Compact ...
Flow: 3 m³/h - 40 m³/h
Head: 4.2 m - 18 m
Power: 0.37 kW - 2.2 kW
Technical data Construction Self-priming swimming pool pumps with built-in strainer and motor insulated from pumped water. The pump is made with high quality plastic materials, corrosion ...
• Magnetic drive pump made of plastic material • Closed or open impeller pump in AISI304 or AISI316 • Connectors in PP, PVC, PVDF • Pumps with membrane in plastic ...
... mm (1/4'') Advanced Plastic Pump Material Ship Wt Polypropylene 2 kg (4 lbs) PVDF 2 kg (5 lbs) NON-WETTED HOUSINGS Description Material Center Section Polypropylene Wetted ...
Wilden Pump
Flow: 3.6, 3 l/min
Pressure: 102, 71 mbar
Fluid temperature: 0 °C - 95 °C
This pump is designed for dispense. The use of the pump allows for flexible siting of dispense valves inside the machine, including up to approx. 0,4 metre (15,7 inch) above the water level in the boiler. Varying ...
Flow: 3 l/min - 12 l/min
Pressure: 0 psi - 50 psi
Head: 22'00"
... who are unable to fulfill their unique pump specifications with an off-the-shelf solution and require a custom-engineered pump specific to their application. Please click the "Pump ...
Gorman-Rupp Industries
Flow: 5 l/min - 60 l/min
Pressure: 3.7 bar
Head: 40, 60 m
... can be used for all premixed dry mortar and site-made mixes. The Putzmeister SP 11 LMR worm pump offers lasting value, thanks to its lightweight yet robust plastic hood, for example, which can withstand ...
PUTZMEISTER
Flow: 5, 2, 4 l/min
Pressure: 0.15, 0.18, 0.1 bar
Power: 3, 5, 1.8 kW
The ACO77 series air pumps are ideal for small hydroponic tanks and aquariums; they are great for bubble features and sensory equipment. Available in 1 or 2 outlets the ACO77 series is by far the quietest ...
Flow: 80 l/min
Pressure: 30 psi - 995 psi
Power: 20 W
... EP1320C 1/10 Gallon Dual Cartridge Pump System is a powerful, medium-ratio system for controlled fluid transfer from 1/10th gallon (310 ml) plastic cartridges. Suitable for silicone-type fluids, this ...
Flow: 12 m³/h - 118 m³/h
Pressure: 31 bar
... slurries Details: High viscosity High pressure Runs dry without damage High temperature High vacuum External bearing chamber Shaft seals available Externally timed gears ...
Please specify:
Help us improve:
remaining