- Hydraulics - Pneumatics >
- Pipe, Tube and Fitting >
- Water hose >
- Watson
Watson water hoses
Inner diameter: 3 mm
Outer diameter: 7 mm
Pressure: 10,000 psi
... • Hose is hard to break and very flexible • Adapt from hose to virtually any device under test with only one connection • A corrosion resistant strain-relief on each hose ...
Ralston
Inner diameter: 3 mm
Outer diameter: 7 mm
Pressure: 700 bar - 2,760 bar
... -test™ USN Hoses 10,000 psi microbore hoses with male or female Ralston Quick-test USN connections provide high pressure, super low volume for quick access for testing and calibration of live pressure ...
Ralston
Inner diameter: 3 mm
Outer diameter: 6 mm
Pressure: 69,000 psi
... similar tube fittings without a wrench. • An excellent solution for connecting to tube fittings for pressure calibration, gas sampling, pressure reading and testing • A unique design that ...
Ralston
Inner diameter: 400, 315, 250 mm
Outer diameter: 315, 400 mm
Inner diameter: 2.5 mm - 17.5 mm
Outer diameter: 7 mm - 24.5 mm
Pressure: 3 bar
... Butadiene Rubber), black, smooth Operating temperature: from -40º C to +160º C WATER HOSE ACCORDING TO DIN 73411 TYPE C Resistance against hot and cold water, steam, liquid ...
Inner diameter: 13, 6, 9 mm
Outer diameter: 17, 23, 13 mm
Pressure: 0 bar - 20 bar
Compressed air and water hose NR / SBR, black, Temperature range -20 °C to 60 °C, Hose Ø 13x6, PN max. 20 bar, Roll of 50 m Robust yet flexible hose ...
RIEGLER & Co.KG
Outer diameter: 0.5 in - 2 in
EUCALENE-LDPE Pipes made of LD-PE for cold potable water
Inner diameter: 19 mm
Outer diameter: 25.4 mm
Pressure: 5.3 bar
... Properties: Oil resistant Highly-flexible Kink proof - Type - Water hose - Hose inside diameter - 19 mm - Hose inside diameter - 3/4 Inch - ...
Inner diameter: 19.5 mm - 51.1 mm
Outer diameter: 32.3 mm - 71.1 mm
Pressure: 345 bar
... MISSION • INCREASED SAFETY • ENVIRONMENTAL PROTECTION • PRODUCT RESPONSABILITY • ENERGY CONSUMPTION REDUCTION • LEAKAGE-FREE HOSE ASSEMBLIES • OIL-LESS ASSEMBLIES • FULL SYSTEM CONTROL IN CASE OF HIGH PRESSURES, VIBRATIONS ...
Inner diameter: 12.7 mm - 38 mm
Outer diameter: 20.7 mm - 47 mm
Pressure: 10, 20 bar
Long service life Wide range of dimensions Applications A versatile hose for high pressure cleaning operations and general discharge service using hot or cold water and many other fluids ...
Trelleborg Industrial Hose
Inner diameter: 0.05 in - 0.33 in
Outer diameter: 0.125 in - 0.5 in
Pressure: 0.8, 0.65, 0.5 MPa
SMC's series of polyurethane tubing is manufactured from Polyether resin, insuring the longest possible tube life due to its immunity to hydrolysis. Series TIUB inch size tubing is available in 8 "quick ship" colors, ...
Inner diameter: 3 mm - 8.1 mm
Outer diameter: 7.9, 15.1 mm
Pressure: 1,500, 2,200 psi
... the benefit of the operator. Markets: • Water jet cutting (only hoses > 2000 bar) • All markets requiring pressures over 700 bar for their cleaning and cutting applications Features/Benefits: • ...
Parker Polyflex Division - Europe
Inner diameter: 6.4 mm - 25.4 mm
Outer diameter: 12.1 mm - 33 mm
Pressure: 1.4 MPa - 2.4 MPa
... identify your hose needs easily and efficiently. The industry's most complete line of low-pressure hoses and fittings, Push-Lok offers the range and versatility to meet all your instrumentation needs. ...
Parker Stratoflex
Inner diameter: 0.125 in - 0.375 in
Outer diameter: 0.32 in - 1.05 in
Pressure: 2,000, 1,250 psi
TH7 Thermoplastic hydraulic hose is recommended for petroleum, water-based and synthetic hydraulic fluids. Applications include mobile equipment, lubrication lines, blowout preventer control lines, farm ...
Inner diameter: 50 mm - 300 mm
Pressure: 0.4 bar - 2.8 bar
Temperature: -5 °C - 65 °C
... supplies a range of high pressure, high performance agiculture irrigation pipe manufactured to meet many national and international standards.We also offer a range of water pipe accessories ...
Inner diameter: 6.6, 8.3, 9.9, 13, 16.4 mm
Outer diameter: 13, 14.7, 16.8, 20, 23.2 mm
Pressure: 130, 220, 250, 400 bar
High pressure hose for pressure washer applications, exceeds EN 1829-2 Dimensions and tolerances acc. to DIN EN 853 1SNFor cold and hot water up to 155 °C (310°F) Tube Synthetic rubber, ...
Semperflex
Inner diameter: 20 mm - 150 mm
Pressure: 10 bar
Temperature: 0 °C - 95 °C
The CALPEX pipe is a flexible, self-compensating, constant and heat-insulated system with a medium-sized pipe of cross-linked polyethylene. Underground connections are not required. These CALPEX ...
Brugg Pipesystems
GORE Molded Assemblies are used to enable the secure transfer, containment, and sampling of liquids during the manufacture of pharmaceutical and biopharmaceuticals. GORE Molded Assemblies are configured to individual ...
Inner diameter: 30 mm - 203 mm
Pressure: 10 bar - 28 bar
Temperature: -20 °C - 80 °C
Hose for transfers, drainage, irrigation installations, sewage pumping, slurry and fertilizers, irrigation cannons, temporary installations (bypass), etc. Standard length: Available in 60m lengths. Other lengths on ...
KURIYAMA EUROPE
Inner diameter: 0.5 in
Pressure: 13.78 bar
Temperature: -40 °F - 212 °F
Description Multi-Purpose Hose, 1/2" ID x 6', 1/2" MPT Color Blue Fittings 1/2" MPT Rigid Length 6' Warning California Proposition 65 Warning
Inner diameter: 9.5 mm - 52 mm
Outer diameter: 21 mm - 71.5 mm
Pressure: 0 bar - 420 bar
Application:suitable for using oil base hydraulic oil of the hose Tube:the hose consists of a layer of heat-resistant synthetic rubber inner rubber layer Reinforcement:ultra-high strength steel wire ...
Luohe Letone Technology Co., Ltd.
8T9AA FLEXOR 6 HF SAE 100 R6 - EN 854 R6 Tube : OIL RESISTANT SYNTHETIC RUBBER Reinforcement : ONE HIGH TENSILE TEXTILE BRAID Cover : ABRASION, OZONE AND HYDROCARBON RESISTANT SYNTHETIC RUBBER Application : LOW ...
ALFAGOMMA
... ® PEX hose---for sanitary product LIC ® Pex hose series have advantages as follows: high temperature resistance, high abrasion resistance, drinking grade, etc. Application : LIC ® hoses ...
Weihai Lianqiao New Material Science & Technology Co.,Ltd
Inner diameter: 2.5 mm - 14 mm
Outer diameter: 4 mm - 20 mm
Temperature: -35 °C - 60 °C
- Made of polyether-polyurethane (PU-H) - Color transparent: natural, red, blue - External calibration; for use with Eisele plug connectors - Temperature range -31 to 140 °F (-35 to +60 °C) - Free of halogen, plasticizers, PWIS, copper ...
EISELE GmbH
Inner diameter: 40, 25 mm
Semi-Rigid hose manufactured in accordance with NF S 61-115 - Great for industrial, construction or Wash Down - Standard in 50' & 100' lengths - Standard in 65' & 130' lengths - Hose is available in ...
POK
Outer diameter: 110 mm - 710 mm
Temperature: -50 °C - 110 °C
Delivered length: 34 m - 2,000 m
... extreme operating conditions of temperature, corrosion and wear). Light weight and flexible pipe with good natural bend radius. Easy to install (Pex pipe can be laid uphill ...
LOCS
Inner diameter: 6.35 mm - 50 mm
Outer diameter: 11.5 mm - 62 mm
Pressure: 15 bar - 68.8 bar
Natural LDPE liner Natural EVA inner tube 1000 denier high tenacity polyester yarn reinforcement Grey or white flexible EVA cover The material used is approved for food contact applications ...
Colex International Limited
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining