Inner diameter: 5.4 mm - 22.2 mm
Outer diameter: 11.2 mm - 30.5 mm
Pressure: 52, 69 bar
... vehicles where abrasive protection is required. This hose is sold by the metre. Fluid applications - Oil, Coolant & Water Compatible fittings 236, 336, 2776 & 936 hose finishers.
GOODRIDGE FLUID TRANSFER SYSTEMS
Inner diameter: 7.9, 9.5, 6.3 mm
Outer diameter: 15.5, 11.7, 13.2 mm
Pressure: 63 bar
The 202 hose is a rubber lined, single braid hose, compatible with 936 hose finishers. This hose is sold by the metre. Compatible fitting 936 hose ...
GOODRIDGE FLUID TRANSFER SYSTEMS
Inner diameter: 6.7 mm - 25.4 mm
Outer diameter: 9.6 mm - 32.2 mm
Pressure: 50 bar - 88 bar
... 910. The hose features a smooth bore, externally convoluted, carbon impregnated, anti-static PTFE liner, wrapped in a Stainless Steel braid. In addition to the 711 crimp and 4000 series crimp/draw swage fittings, ...
GOODRIDGE FLUID TRANSFER SYSTEMS
Inner diameter: 3 mm
Outer diameter: 7 mm
Pressure: 10,000 psi
... • Hose is hard to break and very flexible • Adapt from hose to virtually any device under test with only one connection • A corrosion resistant strain-relief on each hose ...
Ralston
Inner diameter: 3 mm
Outer diameter: 7 mm
Pressure: 700 bar - 2,760 bar
... -test™ USN Hoses 10,000 psi microbore hoses with male or female Ralston Quick-test USN connections provide high pressure, super low volume for quick access for testing and calibration of live pressure ...
Ralston
Inner diameter: 3 mm
Outer diameter: 6 mm
Pressure: 69,000 psi
... similar tube fittings without a wrench. • An excellent solution for connecting to tube fittings for pressure calibration, gas sampling, pressure reading and testing • A unique design that ...
Ralston
Inner diameter: 13, 6, 9 mm
Outer diameter: 17, 23, 13 mm
Pressure: 0 bar - 20 bar
Compressed air and water hose NR / SBR, black, Temperature range -20 °C to 60 °C, Hose Ø 13x6, PN max. 20 bar, Roll of 50 m Robust yet flexible hose ...
RIEGLER & Co.KG
Inner diameter: 25 mm - 75 mm
Pressure: 16 bar
Temperature: -40 °C - 100 °C
SYNTHETIC SPECIAL 500 Standard Fire-Fighting hose High quality lay flat hose for all fire-fighting operations. Circular woven jacket out of 100% high tenacity synthetic yarn with an inner liner made ...
Jakob-Eschbach
Inner diameter: 25 mm - 75 mm
Pressure: 16 bar
Temperature: -40 °C - 100 °C
SYNTHETIC SIGNAL Fluorescing Fire-Fighting hose Multi purpose lay flat hose especially for fire-fighting operations. Outside 100% high tenacity, colour dyed polyester yarn for better visibility. Circular ...
Jakob-Eschbach
Inner diameter: 52 mm - 75 mm
Pressure: 16 bar
Temperature: -40 °C - 100 °C
SYNTHETIC PRO Fire-Fighting hose for heavy duty applications Developed in cooperation with professional fire brigades. Fluorescing for better visibility. Outside 100% high tenacity, colour dyed polyester yarn. Circular ...
Jakob-Eschbach
Outer diameter: 25 mm - 75 mm
Pressure: 15 bar - 85 bar
... polyethylene. CHARACTERISTICS Its design and weight make it an easy hose to roll, transport and unfold. Its good flexibility, even at low temperatures, avoids problems of flow loss and hose management. Its ...
Inner diameter: 25, 45, 70 mm
Pressure: 45 bar - 100 bar
... the same nitrile rubber. Its design and weight make it an easy hose to roll, transport and unfold. Its good flexibility, even at low temperatures, avoids problems of flow loss and hose management. Its ...
Inner diameter: 12.7 mm - 31.5 mm
Outer diameter: 20.6 mm - 45.7 mm
Pressure: 250, 275 bar
Specially designed to meet minimum bend radius Optimum cut and wear resistance Resistant to microbiological degradation Bonded tube and cover Lightweight compared to conventional rubber alternatives Increased lifetime Available ...
Outer diameter: 0.5 in - 2 in
EUCALENE-LDPE Pipes made of LD-PE for cold potable water
Inner diameter: 5.97 mm - 6.48 mm
Outer diameter: 10.29 mm - 11.43 mm
Pressure: 320 bar
Type Speed→Flow ®-Z/G/D/1/S is manufactured from virgin Zytel® (nylon) resin with a double AISI 304 stainless steel, high tensile braid. The Zytel® (Polyamide) inner core guarantees minimum diffusion through the wall at high working pressure Fittings Fittings ...
XTRAFLEX NV
Inner diameter: 8 mm - 50 mm
Outer diameter: 9 mm - 51 mm
Temperature: -20 °C - 105 °C
... tube-shaped pliable spiral tube that is fitted with cables, conductors, tubes and wire assemblies. It is characterized by its optimum protection agianst mechanical wear and is ideally installed after cables have been ...
Inner diameter: 19 mm
Outer diameter: 25.4 mm
Pressure: 5.3 bar
... Properties: Oil resistant Highly-flexible Kink proof - Type - Water hose - Hose inside diameter - 19 mm - Hose inside diameter - 3/4 Inch - ...
Inner diameter: 12.7 mm - 38 mm
Outer diameter: 20.7 mm - 47 mm
Pressure: 10, 20 bar
Long service life Wide range of dimensions Applications A versatile hose for high pressure cleaning operations and general discharge service using hot or cold water and many other fluids ...
Trelleborg Industrial Hose
Inner diameter: 0.05 in - 0.33 in
Outer diameter: 0.125 in - 0.5 in
Pressure: 0.8, 0.65, 0.5 MPa
SMC's series of polyurethane tubing is manufactured from Polyether resin, insuring the longest possible tube life due to its immunity to hydrolysis. Series TIUB inch size tubing is available in 8 "quick ship" colors, ...
Inner diameter: 3 mm - 8.1 mm
Outer diameter: 7.9, 15.1 mm
Pressure: 1,500, 2,200 psi
... the benefit of the operator. Markets: • Water jet cutting (only hoses > 2000 bar) • All markets requiring pressures over 700 bar for their cleaning and cutting applications Features/Benefits: • ...
Parker Polyflex Division - Europe
Inner diameter: 6.4 mm - 25.4 mm
Outer diameter: 12.1 mm - 33 mm
Pressure: 1.4 MPa - 2.4 MPa
... identify your hose needs easily and efficiently. The industry's most complete line of low-pressure hoses and fittings, Push-Lok offers the range and versatility to meet all your instrumentation needs. ...
Parker Stratoflex
Inner diameter: 50 mm - 300 mm
Pressure: 0.4 bar - 2.8 bar
Temperature: -5 °C - 65 °C
... supplies a range of high pressure, high performance agiculture irrigation pipe manufactured to meet many national and international standards.We also offer a range of water pipe accessories ...
Inner diameter: 20 mm - 150 mm
Pressure: 10 bar
Temperature: 0 °C - 95 °C
The CALPEX pipe is a flexible, self-compensating, constant and heat-insulated system with a medium-sized pipe of cross-linked polyethylene. Underground connections are not required. These CALPEX ...
Brugg Pipesystems
Inner diameter: 30 mm - 203 mm
Pressure: 10 bar - 28 bar
Temperature: -20 °C - 80 °C
Hose for transfers, drainage, irrigation installations, sewage pumping, slurry and fertilizers, irrigation cannons, temporary installations (bypass), etc. Standard length: Available in 60m lengths. Other lengths on ...
KURIYAMA EUROPE
Inner diameter: 0.5 in
Pressure: 13.78 bar
Temperature: -40 °F - 212 °F
Description Multi-Purpose Hose, 1/2" ID x 6', 1/2" MPT Color Blue Fittings 1/2" MPT Rigid Length 6' Warning California Proposition 65 Warning
Inner diameter: 9.5 mm - 52 mm
Outer diameter: 21 mm - 71.5 mm
Pressure: 0 bar - 420 bar
Application：suitable for using oil base hydraulic oil of the hose Tube：the hose consists of a layer of heat-resistant synthetic rubber inner rubber layer Reinforcement：ultra-high strength steel wire ...
Luohe Letone Technology Co., Ltd.
8T9AA FLEXOR 6 HF SAE 100 R6 - EN 854 R6 Tube : OIL RESISTANT SYNTHETIC RUBBER Reinforcement : ONE HIGH TENSILE TEXTILE BRAID Cover : ABRASION, OZONE AND HYDROCARBON RESISTANT SYNTHETIC RUBBER Application : LOW ...
ALFAGOMMA
... ® PEX hose---for sanitary product LIC ® Pex hose series have advantages as follows: high temperature resistance, high abrasion resistance, drinking grade, etc. Application : LIC ® hoses ...
Weihai Lianqiao New Material Science & Technology Co.,Ltd
Inner diameter: 2.5 mm - 14 mm
Outer diameter: 4 mm - 20 mm
Temperature: -35 °C - 60 °C
- Made of polyether-polyurethane (PU-H) - Color transparent: natural, red, blue - External calibration; for use with Eisele plug connectors - Temperature range -31 to 140 °F (-35 to +60 °C) - Free of halogen, plasticizers, PWIS, copper ...
EISELE GmbH
Inner diameter: 40, 25 mm
Semi-Rigid hose manufactured in accordance with NF S 61-115 - Great for industrial, construction or Wash Down - Standard in 50' & 100' lengths - Standard in 65' & 130' lengths - Hose is available in ...
POK
Outer diameter: 110 mm - 710 mm
Temperature: -50 °C - 110 °C
Delivered length: 34 m - 2,000 m
... extreme operating conditions of temperature, corrosion and wear). Light weight and flexible pipe with good natural bend radius. Easy to install (Pex pipe can be laid uphill ...
LOCS
Please specify:
Help us improve:
remaining