Oil hoses

Inner diameter: 1.8 mm - 11 mm
Outer diameter: 3 mm - 16 mm
Pressure: 9 bar - 14 bar

Polyurethane Ester Base Tubes Flexible : and long-lasting Temperature : - 20°C to +70°C Construction : Polyurethane Ester base For use with : Cylinders, PLCs Resistance : to greases and oils Standard ...

Inner diameter: 8 mm - 10 mm
Outer diameter: 12 mm - 14 mm
Pressure: 20 bar

The Enroulex polyurethane hose, manufactured by Prevost, has been constructed out of PVC - SBR/EPDM - PU which comes in a coil packing. This hose is resistant to abrasion and comes in a black color finish. Caracteristics Resistance ...

Inner diameter: 15 mm - 19 mm
Outer diameter: 21 mm - 26 mm
Pressure: 13 bar

The Multi-layer PVC hose, manufactured by Prevost, has been constructed out of PVC - SBR/EPDM - PU which comes in a coil packing. This hose is resistant to abrasion and comes in a green color finish. PVC ...

Inner diameter: 0.5 mm - 25.4 mm
Temperature: -20 °C - 80 °C

... It is also used as a media feeder and for pH regulation in fermentation, transfer and filtration processes. The Pumpsil tube is highly efficient and works at a wide operating temperature range from -20°C to 80°C. ...

Inner diameter: 0.5 mm - 25.4 mm
Temperature: 5 °C - 80 °C

This Bioprene thermoplastic elastomer tube is safe and certified for pharmaceutical and food applications. Bioprene tubes can last ten times longer than other tubing materials which reduces replacement downtime and costs. ...

... custom tube sizes that will address customer's specific applications. It also has custom coil lengths designed to meet production requirements. It has competitive pricing and custom cut lengths to fit the process. ...

Inner diameter: 1.59 mm - 25.4 mm
Outer diameter: 3.18 mm - 31.75 mm
Pressure: 6,050 psi

... applications. It offers exceptional resistance to oils and fatty foods and complies with EU Regulation 10/2011 and FDA food standards. While many rubber and plastic materials exhibit resistance to certain solvents, ...

Inner diameter: 0.08 in - 0.75 in
Outer diameter: 0.14 in - 1 in
Pressure: 1,820 psi

The Tygon® F-4040-A series of Fuel and Lubricant Tubings from Saint Gobain are made for applications concerning fuels and industrial lubricants. They provide swelling and hardening resistant services which lessens failure ...

Inner diameter: 2.032 mm - 6.35 mm
Outer diameter: 3.556 mm - 9.52 mm
Pressure: 2.1 bar - 4.8 bar

... and custom sizes and colors, Tygon LP-1200 tubing is ideal for lawn and garden power equipment, small engine fuel lines, and lubricating oil and grease transfer lines.

Inner diameter: 38, 32, 50, 25, 19 mm
Outer diameter: 51, 44, 65.5, 37, 31 mm
Pressure: 10 bar

The PHARMAKLER FEP is a Trelleborg-style industrial hose made of rubber. Available in sizes ranging from 19-50mm (.75-1.97in.) it is ideal for unloading bays. It works as a fixed or mobile installation in the chemical, ...

Inner diameter: 1.9 cm - 7.5 cm
Outer diameter: 3.1 cm - 9.1 cm
Pressure: 16 bar

CHEMIKLER FEP is a Trelleborg rubber industrial hose that is available in sizes from 19 mm to 100 mm. it is intended for suction and discharge of corrosive chemicals such as fuels, solvents, oils ...

Inner diameter: 2.5 cm - 15 cm
Outer diameter: 3.6 cm - 17.15 cm
Pressure: 6 bar

... processing equipment and stationary equipment and processing filling plant, the Citerdial is a Trelleborg industrial rubber hose also used in the transportation of other liquid food stuffs such as beer, wine, cider, vinegar ...

Inner diameter: 2 mm - 25 mm
Outer diameter: 4 mm - 30 mm
Pressure: 8 bar - 34 bar

This soft plastic pipe has outer and inner layers constructed from polyamide. The blue pipe is temperature resistant and operates with media such as grease, mineral oil and propellants, ...

Inner diameter: 2 mm - 8 mm
Outer diameter: 4 mm - 10 mm
Pressure: 7 bar - 17 bar

... C Temperature max. 60 °C Media aging resistant in oxygen and ozone resistant to aliphatic hydrocarbons and most lubricating oils resistant to hydrolysis and microbes

Inner diameter: 10, 8 mm
Outer diameter: 19, 15, 27, 24 mm

... cooling lines during metal chipping processes. On both sides of the device are screw-in taps made of steel. There is a PVC inner hose on the steel support helix, and this sturdy device can be bent into a variety of positions ...

Inner diameter: 6.5 mm - 13 mm
Outer diameter: 10 mm - 18 mm
Pressure: 0 bar - 16 bar

... range of straight braided hoses is specially designed for use in operations with working pressures as high as 232 psi (16 bar). Models in the range are capable of operating under varying ambient temperature conditions. ...

Inner diameter: 4 mm - 11 mm
Outer diameter: 6 mm - 16 mm
Pressure: 0 Pa - 1,000,000 Pa

Lightweight and malleable, the CEJN Non-Braided PUR Hose is an ideal choice for applications that need a maximum operating pressure level of 145 psi (10 bar). The hose also delivers high tear, tensile, ...

Inner diameter: 8 mm - 11 mm
Outer diameter: 12 mm - 16 mm
Pressure: 0 bar - 14 bar

CEJN presents straight braided anti-spark PUR hose. It provides high resistance to scorching and harm caused by sparks available in welding conditions or where cutting tools are used. The hose has a long ...

Inner diameter: 10, 15.5, 19.5 mm
Outer diameter: 16, 22.5, 27.5 mm

The TVR series of vacuum tubes are made of steel coil. They have rigid designs that ensure no loss of pressure. The internal diameters of the TVR 10, 15 and 20 models are 10mm, 15.5mm and 19.5mm. The external diameters are 18mm, 30mm and 37mm.

Outer diameter: 4, 6 mm

- Protection against hot chips The MS is a flexible metal hose for fluids and air and is available in two sizes. The metal hose is extremely robust and resistant to hot chips, grease, ...

Inner diameter: 100 mm - 150 mm
Outer diameter: 111 mm - 162 mm
Pressure: 1.26 bar - 1.77 bar

The hose, which is manufactured by Masterflex, has a wall that is made up of 100% polyester polyurethane. The thickness of its wall ranges up to 1.7 mm. Meanwhile, the hose is ideal for the dry ...

Inner diameter: 25 mm - 500 mm
Outer diameter: 31 mm - 511 mm
Pressure: 0.13 bar - 3.22 bar

... Suction & transport hose for abrasive solids, for which microbe and hydrolisis resistance is required Transport of fine-grained particles, such as dust and powder Suction/extraction of paper and textile fibres ...

Inner diameter: 50 mm - 300 mm
Temperature: -40 °C - 90 °C

... Master-PUR L-MHR hose is designed for use in conveying and removing fine materials like powder and dust. The hose is enhanced to resist microbes. The model may be used as a suction hose ...

... NORMACLAMP®hose clamps in order to create perfectly matching systems. Depending on the type of material used and the layer construction,NORMAFLEX®fluid systems are suitable for transporting a wide range of different media ...

Inner diameter: 0.5 in
Pressure: 160 bar

Manufactured in NBR with a steel reinforcement braid. With two swaged nuts and male-male adaptors on both ends.

Inner diameter: 2 mm - 25 mm
Temperature: 260 °C

Resists Temperatures to 260°C (500°F) Material: Silicone Tube Stocked in 25 meter Lengths

Inner diameter: 4 mm - 9 mm
Outer diameter: 6 mm - 12 mm
Temperature: -40 °C - 65 °C

... the internal layer is realized in polyurethane, while the internal layer is realized with copolyester material resistant to oils, water and moderate chemical solutions. Recommended for agriculture (pruning, olive down-hearting), ...

Inner diameter: 10, 8, 6, 4, 2 mm
Outer diameter: 12, 10, 8, 6, 4 mm
Pressure: 18, 14, 12, 10, 27 bar

Inner diameter: 3 mm - 12 mm
Outer diameter: 5 mm - 17 mm

Inner diameter: 4.8 mm - 100 mm
Outer diameter: 12.8 mm - 116 mm
Pressure: 10 bar - 160 bar

TUBE : HYDRAULIC OlL RESISTANT SPECIAL SYNTHETIC RUBBER. REINFORCEMENT : 2 HIGH TENSILE SYNTHETIC TEXTILE BRAID. COVER : OlL, ABRASION, OZONE AND WEATHER RESISTANT SPECIAL SYNTHETIC RUBBER. APPLICATION : FOR HYDRAULIC ...

Inner diameter: 19 mm - 101.6 mm
Outer diameter: 32 mm - 116 mm
Pressure: 2 bar - 21 bar

TUBE : HYDRAULIC OlL RESISTANT SPECIAL NBR RUBBER REINFORCEMENT : HIGH TENSILE SYNTHETIC TEXTILE AND STEEL WIRE HELIX. COVER : OIL.HEAT,ABRASION,OZONE AND WEATHER RESISTANT SPECIAL CR RUBBER. APPLICATION : ...

Inner diameter: 19 mm - 101.6 mm
Outer diameter: 29 mm - 115 mm
Pressure: 2 bar - 21 bar

TUBE : HYDRAULIC OlL RESISTANT SPECIAL SYNTHETIC RUBBER REINFORCEMENT : HIGH TENSILE SYNTHETIC TEXTILE AND STEEL WIRE HELIX. COVER : OlL,HEAT,ABRASION,OZONE AND WEATHER RESISTANT SPECIAL SYNTHETIC RUBBER. APPLICATION : ...

Inner diameter: 0.25 in
Pressure: 50, 110 psi
Temperature: 0 °F - 170 °F

Material: Acetal Copolymer Colors: Blue, Orange, Black, White, Grey Compatibility: Yes: Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide No: Chlorine, ...

Inner diameter: 0.25 in
Pressure: 50, 110 psi
Temperature: 0 °F - 170 °F

... at the machine for quick adjustments to hose lengths. Materials and Properties: Material: Acetal Copolymer Colors: Blue, Orange, Black, White, Grey Compatibility: Yes: Acetone, Alcohol, Ethyl, Greases, Oils, ...

Inner diameter: 0.25 in
Pressure: 50, 110 psi
Temperature: 0 °F - 170 °F

Material: Acetal Copolymer Colors: Blue, Orange, Black, White, Grey Compatibility: Yes: Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide No: Chlorine, ...

Inner diameter: 0.5 in - 2 in
Temperature: -60 °C - 260 °C

PFA Spiral Tube Size : 1/2'' ~ 2'' CT type with loose flange. MCT with flange fixed and covered by TK 1mm S.S.304 wiremesh Flange standard : ANSI CLASS 150 or JIS 10K

Inner diameter: 6 mm - 12 mm
Pressure: 300, 400 bar
Temperature: -10 °C - 155 °C

Highly flexible rubber hose with double wire braid embedded reinforcement smooth inner surface and outer cloth impression. Inner tube rubber resistant to temperature, use the passage ...

Under Floor Central Heating Systems Polyplumb offers three configurations of under floor central heating suitable for new build, retrofit, or any type of construction. All are compatible with standard central heating boilers and are ...

Inner diameter: 50 mm - 100 mm
Outer diameter: 66 mm - 116 mm
Pressure: 232, 180 psi

Cervino EN 12115 is an oil and fuel transfer hose whose structure and materials have been stressed and tested according to the most severe specification and rigid temperatures with outstanding ...

Inner diameter: 0.25 mm - 4 mm
Pressure: 275,000,000 Pa - 300,000,000 Pa
Temperature: -10 °C - 70 °C

These thermoplastic hoses offer a high pressure service to clean tubes in applications such as heat exchangers used in the oil refining and chemical industries. The thermoplastic hoses ...

Inner diameter: 10 mm - 38 mm
Outer diameter: 20.2 mm - 57.4 mm
Pressure: 420 bar

... designed for use under extremely high pressure and high impulse applications (e.g. hydrostatic transmission). It is extremely flexible with either six to 20: GlobalSpiral™ or 24: GlobalSpiral™ high couplings and operates ...

Inner diameter: 1.8 mm - 11 mm
Outer diameter: 3 mm - 16 mm
Temperature: -15 °C - 70 °C

... needs a small bend radius, the flexible Parker Legris polyurethane tubing is helpful. The tubing will resist abrasion. It comes in chemical resistant polyester and humidity resistant polyether material. Parker Legris ...

Inner diameter: 4 mm - 12 mm
Outer diameter: 8 mm - 20 mm
Pressure: 10 bar - 20 bar

Composition: ·Inner tube: black synthetic rubber. ·Cover: high tensile syntetic textile braid. Working temperature: From -20º C to +90º C.

Trelleborg Ede hoses are produced from the best hose building materials, incorporating wear, oil and heat resistant rubber compounds, such as NR, SBR, NBR, EPDM, Silicone, HNBR and Viton, ...

Inner diameter: 6.3 mm - 47 mm
Outer diameter: 12 mm - 61 mm
Pressure: 15 bar - 60 bar

... pressure hose that has a stainless steel braid. Material hose is made of PTFE-copolymere TEFLON T62. It can accommodate temperatures of about -70°C up to +230°C. This top of the line product is ideally ...