Weir manual valves

... by butterfly valves. Gearboxes are designed to enable butterfly valves to be opened by one person manually by turning the handwheel under rated pressure acting from one side. It is lockable and does not ...

They are simple water intake valves that transmit water to the land in agricultural pressurized irrigation systems. The user can irrigate by connecting the irrigation pipe directly to the outlets of the receiver valve. ...

When water is supplied to the pump outlets and pipelines, air accumulations in the system, especially in the pump outlets, narrow the water passage area and cause a decrease in capacity. Double sphere suction cups are used to avoid this ...

DN: 2 in - 84 in

The M&J Valve Model M-303 is an advanced design slab gate valve for high pressure differential applications in the oil & gas sector. It is designed to simplify installation and upgrades, improve safety ...

DN: 2 in - 36 in

... Recovery Mainline Block Valves Tank and Station Valves Block & Bleed Valves Manifold Valves Launcher/Receiver Trap Valves ...

DN: 3 in - 24 in

M&J Valve's high quality 4-way diverter valve system is specifically designed for the rigid requirements of bi-directional meter proving. The M&J 4-Way Diverter Valve is the heart of ...

DN: 0.5 in

Every wetkit is completed with hoses and adaptors of various types. Hyva offers a wide range of high quality parts dedicated to various truck related applications. These components are also critical from the quality point of view as they ...

Pressure: 5,000, 3,000 psi
Temperature: 0 °F - 225 °F

Use to slowly or quickly bleed pressure from a line after a calibration is complete • Easily connect between the end of a Quick-test hose and the process connection • Keep fluid or contaminates out of the hand pump, calibrator or ...

Keep a calibration system pressurized with a fluid or gas while venting the pressure from the device being calibrated

Pressure: 200, 350 bar
Temperature: -18 °C - 105 °C

... process and isolate the process from the gauge to perform a calibration of the gauge. After completing the calibration open the valve and place the gauge on-line, all without blowing down the system. * Use whenever ...

DN: 1 in - 12 in
Pressure: 20 mbar - 70,000 mbar
Temperature: -20 °C - 60 °C

... For disengaging by decrease on pressure it is possible to regulate the shut-off valve from 0 to 15 bar; over matching the EN 14382 standard. The security shut-off valves are very fast disengaging, ...

DN: 1, 2 in
Pressure: 8 bar

The valve CELTIC-N is a new model developed by Gascat Engineering to use in blanketing systems. Blanketing systems is a process of using an inert gas such as nitrogen or carbon dioxide, in storage tanks to maintain a ...

DN: 25 mm - 100 mm
Pressure: 16 bar
Temperature: 0 °C - 110 °C

... EPDM-seat gasket cone rotatable, protected against water hammer flange connection without drain port (drain valve cannot be added) spindle thread not in contact with medium with a black handwheel ...

DN: 15 mm - 80 mm
Pressure: 16 bar
Temperature: 0 °C - 110 °C

... sensor or thermometer can be added using immersion sleeve spindle thread not in contact with medium wear-resistant valve seat made of stainless steel up to DN 50 with a black handwheel free from dead ...

DN: 50, 15, 40, 25 mm
Pressure: 16 bar
Temperature: 0 °C - 110 °C

wetted metal parts made from dezincification-free and corrosion-resistant gunmetal, resistant against aggressive water spindle with O-ring EPDM-seat gasket gunmetal cone male union thread with plugged drain ...

Pressure: 40 bar
Temperature: -40 °C - 150 °C

... Gas, Chemical, Water Treatment DESCRIPCIÓN: FEATURES Connections: NPT (ANSI/ASME B1.20.1) and ISO 7 Rp Materials: These valves are supplied in nickel plated finish, for ISO 7 Rp thread. Brass 58 body. Ball made of ...

DN: 0.25 in - 2 in
Pressure: 63 bar
Temperature: -20 °C - 200 °C

AISI-316 · BSPP ISO-5211 mounting pad to mount directly actuators Characteristics •General industry application. •Blow-out proof stem design. •100% tested with air & water (Open/Close). Specifications •Ends: BSPP threaded ...

DN: 0.25 in - 4 in
Pressure: 63 bar
Temperature: -20 °C - 200 °C

Full bore · AISI-316 · BSPP · BUTT WELD · SOCKET WELD ISO-5211 mounting pad to mount directly actuarors Characteristics •General industry application. •Blow-out proof stem design. •100% tested with air and water (Open/Close). •Anti-static ...

DN: 0.375 in - 4 in
Pressure: 63 bar
Temperature: -20 °C - 200 °C

AISI-316 · BSPP · NPT · BW · SW ISO-5211 mounting pad to mount directly actuators Characteristics • General industry application, •Blow-out proof stem design. •100% tested with air and water (Open/Close). •Anti-static ...

Pressure: 20, 60 bar

The flowcontrol needle valve used at the gas inlet of the machine or the wire feeder gives full flow adjustment and is available at the work place regardless of distance to the gas cylinder/gas outlet.

DN: 2.5 in - 8 in
Pressure: 150 psi

... 2-1/2＂～8＂ JOINT END: FLANGE (ANSI /DIN / JIS/ CNS) WORKING PRESSURE: 150PSI Key words: CPVC handle type butterfly valve

DN: 2 in - 12 in
Pressure: 150 psi

JOINT END: FLANGE (ANSI /DIN / JIS/ CNS) WORKING PRESSURE: 150PSI Key words: CPVC turbine butterfly valve

DN: 0.5 in - 4 in
Pressure: 150 psi

... : 1/2＂～4＂ JOINT END TYPE: FLANGE(ANSI 、 DIN 、 JIS) WORKING PRESSURE: 150PSI Key words: PPH flange type double ball valve

DN: 150 mm - 610 mm
Temperature: 80 °C

... series of deflectors and retainers to reduce wear and extend service life Removable bonnet cover for easy inspection of valve body Displacement pocket prevents wedging and packing into an end seal Optional return ...

DN: 50 mm - 355 mm
Temperature: 80 °C

... from material flow by a metal insert. By design, the valve “self cleans” material from the seat on each stroke of the valve blade improving overall seat life. Ideal application: Manually operated ...

DN: 100 mm - 455 mm

... Vortex® Iris Valve opens from and closes toward the center of its opening to create a gradual flow or restriction of materials. This design ensures an even discharge of materials and allows manual control ...

DN: 50 mm - 300 mm
Pressure: 20 bar
Temperature: -29 °C - 425 °C

... bonnet -TRIM 8 - A410 + stellite Gr. 6 seat - Bolted bonnet & gland pack - Rising stem & non rising handwheel for gate & globe valves - PS: 20 bar (ANSI 150), 50 bar (ANSI 300) - TS: -29°C/+425°C. SKU MXT-1850143 Body ...

DN: 50 mm - 300 mm
Pressure: 50 bar
Temperature: -29 °C - 425 °C

... bonnet -TRIM 8 - A410 + stellite Gr. 6 seat - Bolted bonnet & gland pack - Rising stem & non rising handwheel for gate & globe valves - PS: 20 bar (ANSI 150), 50 bar (ANSI 300) - TS: -29°C/+425°C. SKU MXT-1870144 Body ...

DN: 50 mm - 300 mm
Pressure: 50 bar
Temperature: -29 °C - 425 °C

... bonnet -TRIM 8 - A410 + stellite Gr. 6 seat - Bolted bonnet & gland pack - Rising stem & non rising handwheel for gate & globe valves - PS: 20 bar (ANSI 150), 50 bar (ANSI 300) - TS: -29°C/+425°C. Body material ASTM ...

DN: 3 in - 48 in
Pressure: 10, 16 bar
Temperature: -10 °C - 120 °C

... Double Flange Wafer Type Pneumatic Butterfly Valve Actuated SPECIFICATIONS Electric Actuator: ON-OFF Type, 220VAC, With handwheel Design Short Wafer type Double Flanged Centric Disc Butterfly Valves ...

... pressure, the ceramic valve shows its excellent performance. Ceramic valves can meet the high wear and strong corrosion environment, especially the outstanding feature is the long service life, the performance-price ...

Pressure: 1,000 psi

... Full Port Ball Valve 1000 WOG with direct mounting pad ISO 5211 are made of high quality 316 Stainless steel. The valve with socket welding end connection ensures no accidental leakage. SS316 Socket ...

DN: 40 mm
Pressure: 20 bar
Temperature: -29 °C - 120 °C

We Provide Forged One-Piece Ball Valves, Forged Steel 1-Piece Ball Valves, 1-1/2 Inch, DN40, Class 150 LB, PN20, API 6D. Design Standard: API 6D. Face to Face: ASME B16.10. Test and Inspection: API 598.

DN: 50 mm
Pressure: 20 bar
Temperature: -29 °C - 120 °C

2 Inch 150 LB Forged Steel Ball Valve Maker: API 6D Forged Steel Ball Valves, 2 Inch, DN50, Class 150 LB, PN20, API 6D. Standard: API 6D. Face to face: ASME B16.10. Test and inspection: API 598.

DN: 25 mm
Pressure: 20 bar
Temperature: -29 °C - 120 °C

Forged Steel Ball Valve Supplier: Forging Steel Ball Valves, 1 Inch, DN25, Class 150 LB, PN20, API 6D, ASME B16.10, API 598. Standard: API 6D. Face to face: ASME B16.10. Test and inspection: API 598.

DN: 10 mm - 100 mm
Pressure: 100, 16, 40 bar
Temperature: 0 °C - 220 °C

... body ball valves are isolating valves designed for use with clean steam, condensate and other gases and liquids used in high purity and aseptic processes. The valve is not designed as ...

DN: 10 mm - 100 mm
Pressure: 40, 16, 100 bar
Temperature: 0 °C - 220 °C

... body ball valves are isolating valves designed for use with clean steam, condensate and other gases and liquids used in high purity and aseptic processes. The valve is not designed as ...

DN: 8 mm - 20 mm
Pressure: 0 bar - 16 bar
Temperature: 0 °C - 150 °C

... diaphragm sensing, pressure reducing valves are designed for use with clean air, nitrogen, carbon dioxide, oxygen, argon and other gases or liquids compatible with the construction materials and valve ...

DN: 15 mm - 250 mm
Pressure: 16 bar - 420 bar
Temperature: -101 °C - 350 °C

... unstable factor, the trunnion ball valve downstream seat will be pushed by un-normal pressure, and the release the un-normally pressure automatically, it doesn’t damage to the sealing of upstream seat. 9) The valve ...

DN: 50 mm - 1,000 mm
Temperature: -46 °C - 550 °C

... to corrosion protection. 5) Valve stem with bow friction coefficient of the bearing. 6) Valve seat spring is made of the X-750 INCONEL helical spring, to ensure the sealing performance of the valve ...

DN: 50 mm - 1,400 mm
Temperature: -46 °C - 150 °C

... barrier. 5) Low valve torque 6) Valve fire test has API, 6FA, API607 7) Blowout prevention valve stem, anti-blow out stem 8) Anti-static design G-type series full welded ...

DN: 2 in - 64 in

• Pressure: ANSI CLASS 150LB-2500LB • Types of connection: butt welding • Design of valves is in accordance with: API6D,ASME B16.34 • Length: ASME B16.10 • Connection standard: ANSI B16.25 • Test and examination:API6D,API598

DN: 2 in - 64 in

• Pressure: ANSI CLASS 50LB-2500LB • Types of connection: flange and butt welding • Design of valves is in accordance with: API6D,ASME B16.34 • Length: ASME B16.10 • Connection standard: ANSI B16.5, ANSI B16.25 • ...

DN: 50 mm - 2,000 mm
Pressure: 10, 16 bar

ANSI CLASS 125/150 • Connecting Flanged: JB/T74-90 GB9113 ANSIB16.10 • Construclion: GB/T12221. ASME B16.10 • Body Material: CF8/CF8M/Carbon steel • Lined Material: PTFE/EPDM/FEP/NBR/VITON etc • Designed standard: ...

DN: 80 mm - 300 mm
Flow rate: 20 m³/h - 1,200 m³/h

This valve is operated by line pressure by means of a 3 way selector valve, this selector has the positions “open”, “close” and “auto”. In the “open” position the valve is fully opened, ...

DN: 80 mm - 300 mm
Flow rate: 20 m³/h - 1,200 m³/h

This valve opens and closes in response to an electric signal by means of an incorporated 3 way solenoid (3/2). The signal cans com from a controller, main switch, PLC, etc. This model also incorporates a 3 way valve ...

DN: 2, 3, 4 in
Flow rate: 5 m³/h - 150 m³/h

This valve is operated by line pressure by means of a 3 way selector valve, this selector has the positions “open”, “close” and “auto”. In the “open” position the valve is fully opened, ...

DN: 25 mm - 100 mm
Pressure: 0.2 bar - 10 bar
Temperature: -10 °C - 140 °C

... extraction of the valve by means of 4 screws while the flanges welded to the installation remain fixed. Sanitary butterfly valvescan be operated automatically through an actuator (sanitary pneumatic butterfly valve, ...

DN: 25 mm - 100 mm
Pressure: 0.2 bar - 10 bar
Temperature: -10 °C - 140 °C

The A470 leakage butterfly valve can be used in most liquid product applications in the food-processing, pharmaceutical and chemical industries. The valve A470 offers a safe separation of products and ...

DN: 10 mm - 200 mm
Pressure: 0.2 bar - 10 bar
Temperature: -10 °C - 140 °C

... disc. Multi-position handle as standard feature for valves up to DN-100/4". Two-position handle as standard feature for valves starting from DN-100/4". Several models of easily interchangeable manual ...

DN: 25 mm - 1,000 mm
Pressure: 1 mbar - 16,000 mbar
Temperature: -40 °C - 230 °C

Plastic lined butterfly valves SBP are available in either wafer or lug style for on/off, throttling or control applications for liquid, powdery media or gaseous service. Main features • Large selection of different ...

... water valves, micro-valves, magnetic valves, mechanical valves, pneumatic valves. Check valves are available with various connections ...

DN: 4 mm - 25 mm
Pressure: 250 bar - 300 bar
Temperature: -20 °C - 100 °C

Mounting holes Position switches Combinations Detent on request

DN: 4 mm - 35 mm
Pressure: 250, 500, 350, 400 bar
Temperature: -30 °C - 100 °C

Mounting holes Position switches Combinations Detent on request

DN: 50, 32, 40 mm
Pressure: 420 bar
Temperature: -20 °C - 100 °C

Mounting holes Position switches Combinations Detent on request

DN: 6 in - 8 in
Pressure: 300, 750 psi
Temperature: -46 °C - 240 °C

Trunnion ball | Soft seated | Full bore | Bidirectional Fire safe design | Antistatic design Live loaded stem packing Double encapsulated body sealing ISO 5211 top works for automation Anti blowout stem Self relieving seats Optional ...