DN: 36 in
GEMELS OIL&GAS MANUFACTURING Ball Valves Up to 36"
DN: 50 mm - 1,400 mm
Pressure: 16 bar
... Steel cast Stainless steel cast Aluminiumbronze / bronze Sealing - Rubber seat Operation - Lever Worm gear Pneumatic actuators Electric actuators Hydraulic actuators
Wouter Witzel EuroValve B.V.
DN: 6 mm - 50 mm
Pressure: 30, 40, 65 bar
Automatic brass ball valve with threaded ends Electric actuator L = 12-48 VDC / 15-48 VAC (Low Voltage) H = 85-240 VAC/VDC (High Voltage) 1/4” and 3/8” are 1/2” ball valves ...
G. Bee GmbH
DN: 150 mm - 450 mm
The Series E Iris Diaphragm Valve range is by far the strongest Mucon powered actuated Iris valve. It has an extremely robust construction with reliable drive elements making this product ...
Mucon
DN: 0.25 in - 2 in
The Mark 33 is a motor-operated valve featuring the Jordan sliding gate seat and heavy-duty industrial motors for proportional (resistance), on-off, 4-20 mA electronic control. Models include the Mark 33 in sizes 1/4" ...
DN: 0.5 in
Pressure: 2 bar - 16 bar
Temperature: 1 °C - 70 °C
Drain Valve Timer Type - Series CTD The CTD valve series represents the ultimate in valve performance. Decades of experience of valve manufacturing have allowed us ...
Temperature: -20 °C - 450 °C
... Besides butterfly valve, we can also offer gate valve, ball valve, globe valve, check valve, safety valve and so on. If you have any ...
Wenzhou Solid Mechanical Equipment Co., Ltd.
DN: 50 mm - 150 mm
Pressure: 16, 10 bar
Temperature: -10 °C - 170 °C
The valves in the 04.1 series are three-way, diverter ball valves made of cast iron, with floating ball, manufactured in accordance with the most severe product standards and the quality management of ...
Brandoni
Pressure: 0 bar - 10 bar
Temperature: 0 °C - 50 °C
Flow rate: 290 l/min - 4,800 l/min
Pneumatic proportional control valves - Series EPR Proportional valves, series EPR, are used in the field of pneumatics (compressed air) and allow the adjustment of the output pressure ...
DN: 0.5 in - 8 in
Pressure: 0.5 bar
Gas shut off valves N.C. with manual reset. Normally closed: must be continuosly powered to allow the gas flow. Power consumption: 19VA. Max working pressure 500mBar.
DN: 15 mm - 400 mm
Pressure: 20 bar
Temperature: -196 °C - 550 °C
... regulator valve is mainly used for mixing two fluids into a third fluid; three shunt valve is mainly used for the fluid surge into the two fluids. Confluence of three shunt valve products ...
Pressure: 0 bar - 7 bar
The Fluigent MX is a bidirectional 11-port / 10-way microfluidic valve for injection or selection of up to 10 different fluids. The flow is bidirectional in the valve. The device can be used as a selector ...
DN: 10 mm - 80 mm
Pressure: 25 bar - 40 bar
Temperature: -10 °C - 120 °C
Full bore FPM shaft “o” ring PTFE ball seats Brass valve BSP threaded Nominal pressure: - 1/4” to 1”1/4 = 40 Bar - 1”1/2 to 4”= 25 Bar Working pressure: see pressure / temperature diagram Temperature = -10°C +120°C
VALPES
DN: 50 mm - 400 mm
Pressure: 40, 16, 25 bar
Temperature: -60 °C - 80 °C
... PTFE Ball sealing: PTFE+C with additional sealing made of FVMQ OPERATION Allen key Manual gear Electric actuator Pneumatic actuator Gearbox in horizontal arrangement on default Gearbox ...
DN: 0.25 in - 4 in
Pressure: 40 bar
2 WAY BALL VALVE WITH 5211 ISO PAD FOR ELECTRIC ACTUATOR 2 Way ball valve - Ball and stem in nickel plated brass - DIN 3337 45° Square stem - PN40 With Electric Actuator ...
TUNING Fluid Solutions SARL
DN: 8 mm - 100 mm
Pressure: 40 bar
Temperature: -20 °C - 160 °C
DESCRIPTION • 2-way ball valve BSP female threaded • Full bore • Body and ball Brass chromium plated, stem Brass nickel plated • Mounting flange ISO 5211 for direct mounting pneumatic or electric ...
Vapo Techniek B.V.
... Desalination • Oil Refining Characteristics 1. AFC butterfly valve is characterized by simple structure, small volume and light weight, and it is easy to install and adjust. The valve is widely ...
HEFEI AFC INTERNATIONAL TRADE CO., LTD.
DN: 15 mm - 100 mm
Body Material:UPVC,PP,CPVC,PVDF Seat:PTFE(TEFLON) O-Ring:EPDM,VITON(FPM) Size: DN15(1/2")~DN100(4") Standard: JIS,ANSI,DIN
DN: 50 mm - 600 mm
Pressure: 240 psi
Temperature: 70 °C
... heater's thermal swich mechanical connection flange F10, ISO5210 manual control. Gate valve design standards: Design in accordance to EN 1171, Face to face dimensions according to EN 558, basic series ...
DN: 0.5 in - 2 in
Pressure: 250 psi
Temperature: 70 °F
... unit is an integrated device from EA actuator and TB ball valve. The actuator assembly is designed with 115 VAC setup, while the valve gear is infused with ethylene propylene O-rings. The valve ...
DN: 15 mm - 800 mm
Pressure: 16 bar - 420 bar
Temperature: -100 °C - 720 °C
GUIDED SPHERE VALVE METAL SEAT WIDE RANGE The KTN SAT is the best KTN design to solve the widest range of applications. The main goal of this design is its philosophy of achieving the highest security using unmatched ...
... proportional slide gate. This modular gate allows the installation of various drive configurations - manual, pneumatic, or electric motor driven - on the same base frame. Grain size up to 8 mm High ...
DN: 50 mm - 300 mm
SYLAX® WAFER STYLE SERIES 149GA Body: Cast Iron Disc: 316 Stainless Steel Seat Liner: EPDM
Flomatic
DN: 50 mm - 300 mm
Pressure: 6, 7, 8, 10 bar
Design Center body consists of 1 part to be mounted between two flanges according to EN 1092-1 type 11 form B – PN10 (former DIN 2501). ANSI 150 on request. Media Liquid and pulverised media with fibre particles, viscous media, ...
Watergates GmbH & Co. KG
DN: 50 mm - 600 mm
Pressure: 6, 8, 3, 4, 10 bar
Temperature: 230, 120, 200, 105 °C
... steel shut-off-valves are not necessary available in various seal types areas of application: one part gate valve for industrial use nominal diameters:DN 50 - 600 (2 - 24") material:ductile ...
Lohse GmbH, Maschinenbau
Please specify:
Help us improve:
remaining