- Hydraulics - Pneumatics >
- Pump >
- Industrial pump >
- Witte Pumpen
Witte Pumpen industrial pumps
Flow: 0 l/h - 0.06 l/h
... to 1500 mL/hr (60 mL syringe) Pumps continuously until you stop the pump Infusion rate can be changed while pumping Syringe purge mode Power failure mode allows pump ...
Flow: 0 l/h - 1.451 l/h
Six Channel Programmable Syringe Pump Description: Holds 2, 4, or 6 syringes of up to 140 mL each All syringes operate in sync. Independent syringe operation, including "Push-Pull", available with the Dual Pump ...
Flow: 0 l/h - 2.1 l/h
Programmable OEM Syringe Pump Computer controllable: networkable up to 100 pumps Stand-alone operation: pre-program the pump with a dispensing program, then operate the pump ...
Flow: 0.03 m³/h - 180 m³/h
Pressure: 24 bar
PCM Ecomoineau™ M is the most compact progressing cavity pump (PCP) available on the market today. Its revolutionary design combines the legendary performance and reliability of PCM PCP technology with ...
PCM
Flow: 1 m³/h - 100 m³/h
Pressure: 0 bar - 260 bar
PCM pumps are easy to order, delivered fast, simple to operate and incredibly reliable. PCM Oil & Gas transfer pumps combine the legendary performance and reliability of PCM progressing ...
PCM
Flow: 0 m³/h - 55 m³/h
Pressure: 0 bar - 24 bar
... progressing cavity pump is a culmination of our unrivalled industry expertise and our unwavering commitment to provide the best fluid handling solutions. PCM Moineau™A pumps meet all ...
PCM
Flow: 103 m³/h
Pressure: 34 bar
The enhanced design of Ampco’s patented ZP3 series positive displacement pumps is now leading the industry. It sets the standard for PD circumferential piston pump technology with a simplified yet state-of-the-art ...
... can be carried with the pump at rest or in operation and it can be manual or automatic through automatic actuator driven by 4-20 mA; different BUS; pneumatic. Accuracy within ± 1% within 10-100% of ...
Doseuro S.r.l.
Flow: 44 l/h - 3,569 l/h
Pressure: 40 bar - 250 bar
... be carried with the pump at rest or in operation and it can be manual or automatic through automatic actuator driven by 4-20 mA; different BUS; pneumatic. Accuracy within ± 1% within 10-100% of rated ...
Doseuro S.r.l.
Flow: 44 l/h - 3,569 l/h
Pressure: 50 bar - 250 bar
Positive Return Sandwich Hydraulic Diaphragm Pump SDI Sandwich Hydraulic diaphragm dosing pumps comply with mechanical and performance API 675 standards. Furthermore they comply with ATEX standard, ...
Doseuro S.r.l.
Flow: 0 l/h - 700 l/h
Head: 5.4 m
Power: 115 W
The totally re-designed Sauermann Si-83 Tank Pump represents an in-class breakthrough for condensate removal technology. This revolutionary condensate removal solution has been reimagined from the inside-out to be more ...
Sauermann
Flow: 0 l/min - 246 l/min
Pressure: 20 bar
Head: 50 m
... Standard NEMA 56C motors Magnet Material-Samarium Cobalt Applications Industry-Chemical process, deionized water, wastewater treatment, refrigerants and caustics O.E.M.-Washers, filters, chillers, cooling towers, ...
Price Pump
Product feeling pump with pneumatic or electric functioning. The pump lets to transfer the product by the undervacuum homogenizer to the hopper of the filling machine. It can stop itself thanks to an ...
Flow: 0.1 l/min - 16.2 l/min
Pressure: 40 bar - 2,900 bar
... air filter, air pressure regulator, air lubricator, air pressure gauge, air pressure limit valve, pump on/off control, oil pressure gauge. All pumps supplied complete with a full test certificate. ...
Larzep
Flow: 12 l/min
Pressure: 1.3 bar - 8 bar
Dual effect heavy duty pneumatic piston pump for centralised systems, even for the most complex ones, for high viscosity oil. The possibility to adjust pressure from 0.3 bar to 8.5 bar guarantees great flexibility. ...
FILCAR
For measuring the soot level manually Advantages Rugged and reliable 10 stroke Soot Test Pump Long hose: ideal for difficult to reach measurement openings Non centered soot spot, allows many tests on ...
Flow: 0 l/min - 0.04 l/min
Pressure: 0 bar - 400 bar
Power: 120 W
... systems • Temperature-controlled pump heads (-20…+130°C) • Highly flexible due to various control concepts and housing types Specifications Pump type - compact high-pressure dosing ...
Pressure: 700 bar
Foot-pump with integral three-way directional control valve for supplying single-acting cylinders. A compact, portable, low-cost device equipped with 0.4 litre tank and having maximum operating pressure of 700 bar. Pedal-operated, ...
OLMEC
Flow: 0.0075 l/h - 45 l/h
Pressure: 0.4 MPa - 1.7 MPa
Power: 62 W
... unit design. The IX-B pumps retain this feature creating an entire pump line that will not gas lock and has no priming issues! Flexible Installation (Patent Pending) The IX-B ...
IWAKI
Flow: 4,000 m³/h
Head: 0 m - 200 m
Fluid temperature: 80 °C
The ClydeUnion Pumps Uniglide-e range is the latest generation of axially split, double entry pumps. The range has been developed using the latest 3D and FEA analysis software together with extensive ...
Celeros
Flow: 20,000 m³/h
Head: 0 m - 300 m
Fluid temperature: 80 °C
The ClydeUnion Pumps Uniglide range consists of both configured and engineered to order axially split double suction pumps. Applications Desalination Water treatment, supply and distribution District ...
Celeros
Flow: 2,500 m³/h
Fluid temperature: 80 °C
The ClydeUnion Pumps Duoglide range consists of both configured and engineered-to-order, axially split case, two stage pumps designed for higher head/flow applications. The Duoglide provides higher efficiency ...
Celeros
Flow: 140 l/min
Head: 14 m
Power: 0.55 kW
... applications) negative pressure tight for vacuum systems no metal parts are in contact with the medium easy to maintain (wear parts can be changed swiftly) universally applicable, quiet and compact The ...
Flow: 200 l/min
Head: 27 m
Power: 0.25 kW - 2.2 kW
The S Pump Series has a special pump housing with a collection container that serves as a liquid reservoir. After filling the liquid container, the pump creates a strong negative pressure ...
Flow: 0 m³/h - 3,500 m³/h
Pressure: 0 bar - 6 bar
Head: 33 m
... volute-casing pumps can be used where the requirement is for pumping clean, turbid or slightly contaminated liquids. Occasional solid contaminations can be handled without affecting the pump due to the ...
Flowserve SIHI Pumps
Flow: 300 m³/h
Pressure: 0 bar - 16 bar
Head: 95 m
Pumps of the series ULN are horizontal, self-priming, single-stage volume casing pumps with dimensions and nominal outputs according to EN 733 / DIN 24255 in back pull out construction. The back pull ...
Flowserve SIHI Pumps
Flow: 740 m³/h
Pressure: 0 bar - 16 bar
Head: 90 m
... replacing the motor without disturbing the pump. There is no common shaft for pump and motor, standard motors can be used. The set is a space saving easy to install pump unit. Applications: Volute ...
Flowserve SIHI Pumps
Pressure: 40 bar
Fluid temperature: -20 °C - 180 °C
Screw pumps for industrial use series SSP (low pressure) and HSSP (high pressure) Service For all pumps Universal Hydraulik guarantee maintenance and repair.
Universal Hydraulik GmbH
Flow: 0 us gal/min - 4,000 us gal/min
Pressure: 0 psi - 175 psi
Head: 0'00" ft - 560'00"
The Series e-1510 base mounted end suction pumps deliver the highest efficiencies, performance and durability. All pumps feature stainless steel impellers and an expanded efficiency island for efficient ...
Bell & Gossett Domestic Pump
Flow: 0 us gal/min - 2,300 us gal/min
Pressure: 175 psi
Head: 0'00" ft - 400'00"
... close-coupled, end suction pump with footless volute has been designed to offer the highest overall efficiencies in the market for HVAC and plumbing applications. With the largest “Efficiency Island” compared to other ...
Bell & Gossett Domestic Pump
Flow: 0 us gal/min - 2,500 us gal/min
Pressure: 0 psi - 175 psi
Head: 0'00" ft - 380'00"
The e-80 close-coupled, in-line pump is the standard model in Bell & Gossett’s highly efficient Series e-80 product line but this heavy-duty line of pumps is more than a standard line of pumps! ...
Bell & Gossett Domestic Pump
The propellant pump is especially suitable for bringing liquified propellants with a low boiling point to a high pressure. The pump guarantees a constant propellant pressure in the supply line and in ...
... Pamasol diaphragm pump has been developed to fill suspensions with HFA 134a or 227. It is specially appropriated to pump the suspension continuously from the mixing tank to the machine ...
Flow: 600 m³/h
Pressure: 16 bar
Power: 200 kW
ECW series are single stage, end suction, back pull out, top centreline discharge type. These are offered with different material of construction to handle clear and slight raw water. Dynamically balanced impeller ensures vibration and ...
C.R.I. Pumps
Flow: 720 m³/h
Pressure: 16 bar
Head: 110 m
Single stage chemical process pumps are mainly used to handle different type of chemicals with slight impurities. These pumps are offered with different material of construction according to the liquid ...
C.R.I. Pumps
Flow: 2,500 m³/h
Pressure: 16 bar
Head: 100 m
Medium consistency pulp and process pumps are used to handle different type of syrup, molasses, pulp, paper stock, raw water etc and it can be used maximum consistencies upto 8%. Dynamically balanced semi open impeller ...
C.R.I. Pumps
Flow: 85 l/min
Head: 19 m
Power: 500 W
... M cable and plug •Suitable for dispensing diesel, heating oil, hydraulic oil, machine oil, engine oil, etc •Pump interior in aluminium •Ready-to-use kit, including a pump, media resistant ...
Pressure: 8 bar
Fluid temperature: 100 °C
Output diameter: 25 mm
Flow: 0 l/h - 1,600 l/h
Pressure: -0.8 bar - 2 bar
Easy to replace valves Single-piece bellows Conveys sample gas with condensate Proven pump technology Attractive price Requires little space Mounting accessories and fittings optional Housing version ...
Bühler Technologies
Flow: 0 l/h - 1,600 l/h
Pressure: -0.6 bar - 1.4 bar
Easy to replace valves Single-piece bellows Conveys sample gas with condensate Proven pump technology Attractive price Requires little space Mounting accessories and fittings optional Housing version ...
Bühler Technologies
Flow: 800, 400 l/h
Pressure: -0.6 bar - 2 bar
... Conveys sample gas with condensate Long life Atex versions (see separate data sheet) Low noise emission 115 V - versions with FM C-US approval C-versions specifically for conveying flammable gasses Bypass valve ...
Bühler Technologies
Flow: 15.9 l/min - 24 l/min
Pressure: 0 bar - 20 bar
Power: 0.1 kW - 0.8 kW
The pumps of the IOTA series, produce a flow from 19 to 24 l/min and operate at max. 20 bar pressure. They are generally driven by engines, electric and hydraulic motors. The pumps of this series ...
UDOR S.p.A.
Flow: 48.1 l/min - 71 l/min
Pressure: 0 bar - 20 bar
Power: 0.4 kW - 2.5 kW
The 3-diaphragms pump ZETA 70 produces a flow of 71 l/min and operates at a maximum pressure of 20 bar. It is available with single or double splined/cylindrical shaft. Semi-Hydraulic diaphragm pump ...
UDOR S.p.A.
Flow: 57.3 l/min - 85 l/min
Pressure: 0 bar - 20 bar
Power: 0.5 kW - 3.1 kW
The 3-diaphragms pump ZETA 85 produces a flow of 85 l/min and operates at a maximum pressure of 20 bar. It is available with single or double splined/cylindrical shaft. Semi-Hydraulic diaphragm pump ...
UDOR S.p.A.
... kinetic energy that comes out from impeller into pressure to force oil circulation. The pump can be a part of the pipe line due to the inlet and outlet of the pump are in the same axis. Therefore, the ...
ERG Technology
Pressure: 250, 500, 350 bar
Constant displacement pump with positive locking piston control Low noise level 600 - 1800 rpm speed range Incl. connection flange and screws
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining