Flow: 0 l/min - 5,000 l/min
Head: 0 m - 98 m
Power: 11 kW - 75 kW
... MDW is dimensionally compliant with the international standard (ISO2858, 3661) and is interchangeable with conventional sealed centrifugal pumps.
IWAKI Europe GmbH
Flow: 0 l/min - 4,000 l/min
Head: 0 m - 55 m
Power: 4 kW - 37 kW
... transfer of strong acids and alkalines as well as nearly all chemical solvents. Superior durability The exterior of the pumps is covered with ductile cast iron. Ample pressure resitance has been provided in the rear ...
IWAKI Europe GmbH
Flow: 0 l/min - 1,400 l/min
Head: 13.5 m - 74 m
Power: 1.5 kW - 15 kW
... contact surfaces in the front and rear areas of the pump. Therefore high temperatures are avoided. This greatly improves resistance against dry running in comparison with conventional mag. drive fluororein ...
IWAKI Europe GmbH
Flow: 26 l/min - 34 l/min
Pressure: 140 bar
Length: 36 cm
The TP03 and TP08 lines of trash pumps are a great example of the power of hydraulics when it comes to pumping liquids with solids. The TP03 pump provides 450 gallons per minute (1688 lpm) of discharge ...
Stanley Infrastructure
Flow: 42 m³/h
Power: 2.9 kW
Subaru OHC engine, Automatic low oil shut-off, 3 x hose clips, 2 x hose coupling, 1 x strainer, 1 x spark plug key
Flow: 0.9 m³/h - 36 m³/h
Pressure: 7 bar
Almatec E-Series State-Of-The-Art Plastic AODD Pumps The development of the E-Series was based on the extensive experiences with the proven pump models. The solid design with distinctive wall thicknesses, ...
ALMATEC Maschinenbau GmbH
Flow: 1.3, 3.1, 7 m³/h
Pressure: 7 bar
Almatec C-Series The Cost-Effective Plastic AODD Pumps The Almatec® C-Series Air-Operated Double-Diaphragm (AODD) Pump is a cost-effective, reliable and superior-built alternative and features a solid ...
ALMATEC Maschinenbau GmbH
Flow: 0.7 m³/h - 7.8 m³/h
Pressure: 7 bar
Head: 26'03" ft - 29'06"
... Series AODD Pumps for Low- to Middle-Duty Applications Almatec® CXM Series Air-Operated Double-Diaphragm (AODD) Pumps are general-purpose pumps designed for low- to medium-duty applications ...
ALMATEC Maschinenbau GmbH
Flow: 30 m³/h - 2,000 m³/h
Pressure: 0.3 MPa - 2 MPa
Head: 20 m - 500 m
... driven engine fire-fighting water pump group series with high pressure are developed successfully, strictly complying with national standard-GB6245 2006 “Performance requirement and testing method of fire fighting ...
Shanghai Kaiyuan Pump Industrial Co., Ltd.
Flow: 18 m³/h - 2,000 m³/h
Pressure: 0.3 MPa - 2 MPa
Head: 20 m - 500 m
... other variables to optimize the performance of the pump. It also provides necessary information to operators, such as pump flow rate, pressure, and other relevant data. The controller can be manually ...
Shanghai Kaiyuan Pump Industrial Co., Ltd.
... Centrifugal pumps are commonly used in water supply systems to increase the water pressure in buildings. They help move water through pipes to various points in the building, ensuring a continuous supply of water. Industrial ...
Shanghai Kaiyuan Pump Industrial Co., Ltd.
The Macnaught 20L ATF Hand Pump is your reliable fluid transfer companion. This pump is equipped with an anti-drip aluminium nozzle, ensuring precision and cleanliness with every stroke. No more messy ...
Macnaught Pty Ltd
The Macnaught 60L ATF Hand Pump is your reliable fluid transfer companion. This pump is equipped with an anti-drip aluminium nozzle, ensuring precision and cleanliness with every stroke. No more messy ...
Macnaught Pty Ltd
Flow: 10 l/min
... within pump body Motor is protected by IP55 rating Supplied with connection cables and alligator clips Pump is suitable to use with Diesel, Kerosene and light oil with viscosity less than 500CST Package ...
Macnaught Pty Ltd
Flow: 10 l/h - 750 l/h
Pressure: 0.3 bar - 6 bar
Fluid temperature: 5 °C - 40 °C
The distinguishing feature of our proportional volumetric dosing pumps is their ability to use the driving force of water to mix and produce a solution always proportional to the volume of water supplied. This means there’s ...
MIXTRON S.R.L.
Flow: 1,500 l/h
Pressure: 6 bar
Fluid temperature: 5 °C - 40 °C
The distinguishing feature of our proportional volumetric dosing pumps is their ability to use the driving force of water to mix and produce a solution always proportional to the volume of water supplied. This means there’s ...
MIXTRON S.R.L.
Flow: 10 l/h - 2,500 l/h
Pressure: 6 bar
Fluid temperature: 5 °C - 40 °C
The distinguishing feature of our proportional volumetric dosing pumps is their ability to use the driving force of water to mix and produce a solution always proportional to the volume of water supplied. This means there’s ...
MIXTRON S.R.L.
Flow: 1,000 m³/h
Head: 120 m
Power: 250 kW
... plastic pumps Based on innovative strength and over 60 years of expertise in the use of thermoplastics, we have set a new milestone in the shape of a future-oriented, efficient and reliable pump system.It ...
ASV Stuebbe GmbH & Co. KG
Flow: 235 m³/h
Head: 68 m
Power: 30 kW
STÜBBE E-CLASS: entry-level model in the STÜBBE pump family horizontal, single-stage centrifugal chemical plastic pump with mechanical seal in monobloc design (not self-priming) efficient hydraulics ...
ASV Stuebbe GmbH & Co. KG
Flow: 130 m³/h
Head: 42 m
Power: 11 kW
Horizontal single-stage spiral cased pump Shaft sealing through single or double acting mechanical seal Circulation, rinsing, quench or barrier medium depending on application Made of sturdy plastic components, ensuring ...
ASV Stuebbe GmbH & Co. KG
Power: 1.13 ch - 3 ch
... multiple power sources and a wide variety of sizes to ensure we equip you with the right pump for your application. All TorqLite expertly designed pumps are highly durable and deliver… Adjustable ...
TORQLITE INC
Pressure: 10,000 psi
... heavy duty pump made for multiple applications with full control over advance, hold and retract operations. The electric pump features a 10’ remote motor control with a low voltage starting potential ...
TORQLITE INC
The TL-PM-EH-1500 Electric motor with gear pump is designed to provide optimal service with bolt tensioner or hydraulic tools single-acting. Equipped with remote control with 5 m. cable for easy use, 5 Ltr. tank, electromagnetic ...
TORQLITE INC
Flow: 12 m³/h
Power: 0.37, 0.25 kW
Weight: 8, 12 kg
The FL20C centrifugal pump is well known for its small size and high performance. Despite their small size, these pumps can provide flows up to 12 m3/h with good outcomes. FL20C pumps ...
... consisting of Water Pumps, Thermostats, Thermostat Kits, Switches & Sensors, Coolant Flanges and Radiator Caps. In the quest to reduce engine emissions, there is a growing trend among vehicle manufacturers to use Electric ...
Flow: 72 m³/h - 1,277 m³/h
Head: 17 m - 150 m
... damage •Safe pump-end to minimize risk of electric shock or explosion •Simple and reliable operation Hydraulic Submersible Pump-ends The Godwin Heidra® 100NC (Non-Clog) hydraulic submersible pump ...
Alcon
Flow: 100, 120 l/min
Pressure: 8 bar
Power: 0.35 kW
The OIL-LESS pump units range completely manufactured in Italy by NARDI COMPRESSORI stand out for their high quality, the prime materials and components installed ensure their long life and top performance. With their ...
NARDI COMPRESSORI
Flow: 115, 145 l/min
Pressure: 15 bar
Power: 1.1 kW
The OIL-LESS pump units range completely manufactured in Italy by NARDI COMPRESSORI stand out for their high quality, the prime materials and components installed ensure their long life and top performance. With their ...
NARDI COMPRESSORI
Flow: 36, 43, 29, 35 m³/h
Pressure: 10 bar
Power: 1.9, 2.2 kW
The OIL-LESS pump units range completely manufactured in Italy by NARDI COMPRESSORI stand out for their high quality, the prime materials and components installed ensure their long life and top performance. With their ...
NARDI COMPRESSORI
Flow: 0.7 m³/h - 9,370 m³/h
Pressure: 20 bar - 450 bar
Fluid temperature: -40 °C - 120 °C
... rupture detector available in multiple options: Exakta standard local visual Local visual via pressure gauge Pressure switch (any make, model or case material and signal type: analogue 4 – 20 mA, digital, HART protocol) Pressure ...
Seko S.p.a.
Flow: 11.3 l/h - 2,400 l/h
Pressure: 200, 95, 90 bar
Fluid temperature: -20 °C - 150 °C
Exakta’s broad experience in supporting customers throughout the most challenging projects has led to the development of Nexa XP, a special version of Nexa able to cope with extreme suction conditions and a wide range of chemicals. Nexa ...
Seko S.p.a.
Flow: 3.4 l/h - 660 l/h
Pressure: 124 bar
Power: 1.1, 1.5, 0.18, 0.25, 0.75 kW
... result is a pump that delivers metering precision and consistency for repeatable results and efficient chemical consumption. Reliability Nyva’s ATEX-approved design and zero-leakage profile provide operators with ...
Seko S.p.a.
Flow: 1.6 l/min - 25 l/min
Pressure: 0 bar - 10 bar
Head: 0 m - 100 m
The gear pumps of the PM series have a wide range of models that allow the transfer of flow rates ranging from 25 l / min to 280 l / min. This type of pumps are suitable for use in the most diverse sectors ...
Anglada Pumps
Flow: 4.4 l/min - 66 l/min
Pressure: 0 bar - 10 bar
Head: 0 m - 100 m
The gear pumps of the PM series have a wide range of models that allow the transfer of flow rates ranging from 25 l / min to 280 l / min. This type of pumps are suitable for use in the most diverse sectors ...
Anglada Pumps
Flow: 6.6 l/min - 100 l/min
Pressure: 0 bar - 10 bar
Head: 0 m - 100 m
The gear pumps of the PM series have a wide range of models that allow the transfer of flow rates ranging from 25 l / min to 280 l / min. This type of pumps are suitable for use in the most diverse sectors ...
Anglada Pumps
Flow: 32 us gal/min
Pressure: 0 psi - 52 psi
WX10 (WX10K1A, WX10K1AT ) FEATURES Lightweight general purpose pump Easy starting Honda mini 4-stroke engine 37 gal./min capacity Weighs only 13.4 lbs. Garden hose adaptor, suction hose, clamps, ...
Honda Power Equipment
Flow: 74 us gal/min
Pressure: 0 psi - 52 psi
WX15 Lightweight general purpose pump Easy starting Honda mini 4-stroke engine Weighs only 20 lbs. 72 gal./min capacity Hose clamps and strainer included
Honda Power Equipment
Flow: 164 us gal/min
Pressure: 0 psi - 45 psi
WB20 (WB20XK2A ) FEATURES General purpose, centrifugal 2" pump Easy starting Honda OHV commercial engine 152 gal./min. capacity Durable silicon carbide mechanical seal Cast iron volute and impeller
Honda Power Equipment
Flow: 0 m³/h - 1,000 m³/h
Power: 1.3 kW - 310 kW
... Excellent flow passing properties Motors with high power density Robust and reliable COMPACT CHOPPER PUMPS CUT SUMP PROBLEMS DOWN TO SIZE The Flygt F 3069 chopper pump is specifically ...
FLYGT
Flow: 57 l/min
Pressure: 10 bar
... applications of low viscosity fluids, diesel, non aggressive fluids, short distances without reels. Needle valve for regulating pump speed is included. Designed for quiet and reliable operation and for 200l drums, spout ...
Wilhelmsen
Flow: 189 l/min
Pressure: 1.4 bar - 8.6 bar
Head: 8.8 m
The polypropylene diaphragm pump is built with the highest quality precision parts. Long lasting even when used with abrasive fluids, making this product very cost effective. Professionals turn to this pump ...
Wilhelmsen
Flow: 30 l/min
Pressure: 10 bar
1:1 CHEMICAL PUMP W/HOSE AND GUN The Unitor 1:1 chemical pump is ideal for use when applying cleaning chemicals before washing with high pressure or the Unitor Cleaning Jet. This unit has been developed ...
Wilhelmsen
Pressure: 63 bar
Power: 0.18, 0.12 kW
Fluid temperature: -10 °C - 60 °C
The pump is designed for the lubrication with plastic grease or oil of machines and equipment requiring continuous lubrication in small quantities. The lubricant is fed to each receiving point via ...
Zaklady Automatyki POLNA S.A.
Flow: 0.15, 0.25 l/min
Pressure: 400, 200 bar
Power: 0.75 kW
The pump is designed to lubricate friction nodes in machines and devices through dosing distributors (two-way feeders). It is recommended for use in high-load machines and devices, with a large number of lubrication ...
Zaklady Automatyki POLNA S.A.
Flow: 0.4, 0.2, 0.1 l/min
Pressure: 200, 320, 400 bar
Power: 1.1 kW
The pump is designed to lubricate friction nodes in machines and devices through dosing distributors (two-way feeders). It is recommended for use in high-load machines and devices, with a large number of lubrication ...
Zaklady Automatyki POLNA S.A.
Flow: 10 m³/h - 1,400 m³/h
Weight: 142 kg - 1,956 kg
The Linatex pump, type III R, belongs to the latest generation of successful wear-resistant and corrosion resistant slurry pumps and has an improved efficiency. It has in practice proven durable Linatex ...
Flow: 2,600 m³/h
Pressure: 10, 15 MPa
Head: 300 m
... mounted. Axial suction, radial discharge, suction and discharge flange pressure rating is the same. The axial force in the pump is balanced by the optimally designed sealing ring and balance hole, the paired tapered ...
SOURCE Pumps & SYSTEMS Co., Ltd.
Flow: 1,000 m³/h
Pressure: 5 MPa
Fluid temperature: 30 °C - 230 °C
... are located on the same horizontal line, vertical installation, small footprint, easy installation. The pump has a separate bearing frame and the bearings are grease lubricated. The pump ...
SOURCE Pumps & SYSTEMS Co., Ltd.
Flow: 2,000 m³/h
Pressure: 2.5 MPa
Head: 160 m
... petrochemical, chemical industry, coal chemical, refinery, pulp and paper, district heating, flue gas desulfurization and general industrial applications.
SOURCE Pumps & SYSTEMS Co., Ltd.
Pressure: 51.7, 34.3 MPa
Power: 596, 373, 969, 745, 1,193 kW
Length: 3,639 mm - 5,475 mm
Mud pump is used to circulate drilling fluid while drilling, it is the core part of drilling fluid circulation system, and it is composed of power end and fluid end. The products conform to API Spec 7k standards, and ...
Output diameter: 60.3 mm - 88.9 mm
... -salt pump, through bridge pump, deflecting well pump, anti-powdered coal pump and so on special well oil pump. Technical Features 1. The pump ...
Flow: 50 l/min
Pressure: 360 mbar
• Extreme compactness and solidity • High efficiency (up to class A ++) • Integrated heating element • Pressure: 360 mBar – Flow rate: 50 L / min Applications • Domestic and professional dishwashers
Power: 20 W - 400 W
• Asynchronous and brushless motors for rotary vane pumps (flow rates 50-350 l/h) • Low vibrations and noise • Compatible with magnetic drive pumps or mechanical drive pumps ...
Flow: 20 l/min
Pressure: 20 bar
Fluid temperature: 60 °C
Three-diaphragm pump with reinforced Polypropylene circuit, Kynar/AISI 316 valves (LFP version), AISI 316 diaphragm mounting components, Viton seals. Version: SP (cylindrical with shaft key), CR (reduction gearbox ...
Annovi Reverberi
Flow: 55, 71, 87 l/min
Head: 23, 16, 10, 7 m
Power: 450, 250 W
... ventilated universal motor. The lightweight, handy and powerful device can be used as drive for the pump tubes of the laboratory and drum pumps and is useful in this combination for many thin fluid, ...
Dr. Jessberger GmbH
Flow: 82, 61 l/min
Head: 9, 20 m
Power: 460 W
... aggressive vapours of acids and alkalies are present. The standard in the on/off switch integrated low voltage release is intended to prevent an uncontrolled start of the drum pump motor after a power ...
Dr. Jessberger GmbH
Flow: 55, 66 l/min
Head: 7.5, 15 m
Power: 400 W
The drum pump motor JP-164 is a compactly built, not explosion-proof, internally ventilated universal motor, that has proven itself for slightly viscous media as diesel in agricultural field and at fire brigades foaming ...
Dr. Jessberger GmbH
Please specify:
Help us improve:
remaining