- Metrology - Laboratory >
- Inspection and Monitoring >
- Signal conditioner >
- YOKOGAWA Europe
YOKOGAWA Europe signal conditioners
Integrating Charge / IEPE Amplifiers Application • Signal conditioning for dynamic measurement with piezoelectric sensors for acceleration, force and pressure or sound • Front-end with anti-aliasing filter for PC ...
Metra Mess- und Frequenztechnik in Radebeul e.K.
... well proven Vallen AE Signal Conditioner (ASCO-P). Connected to a PC using the standard USB 2.0 interface the 4-channel data acquisition module samples APK (Acoustic Peak Amplitude), ASL (timely average ...
The TMI is a fi ber optic signal conditioner especially designed to work with FISO s temperature sensors. It is a general-purpose instrument ideally suited to perform multi-point temperature measurements ...
FISO Technologies
The 8006 vibration module is designed to power and accept a signal from a constant-current accelerometer. The signal can be integrated and converted to a 4-20mA current proportional to velocity (8006) ...
Single channel - signal conditioner for AC - LVDT displacement sensors with minimal dimensions of only 25x25x9 mm for direct mounting on PCB`s. The device simultaneously generates the excitation voltage ...
inelta Sensorsysteme
... use Phonoptics fiber optic sensors, it is necessary to use electronics providing the optical signal and its analysis. This Myotis1300 version also allows signal amplification with a gain on 3 levels, ...
Phonoptics
CDV-900A is a general signal conditioner with constant voltage type bridge excitation. It has high frequency response range from DC to 500 kHz, and excellent nonlinearity within ±0.01%FS. Simple setting ...
Kyowa Electronic Instruments Co.
Premium, Field Configurable Vibration & Temperature Signal Conditioners Temperature Range: -40 to 185°F (-40 to 85°C) Maximum Load Resistance: 600 ohms Humidity Range: 0-95% Relative, Non-Condensing Connectors: ...
Connection Technology Center Inc.
The 4010, manufactured by Dytran is a signal conditioner controlled by a microprocessor. Its 3-channel DC signal conditioner amplifier is used together with a bridge-type ...
... and functionality for very specific purposes. It is a signal conditioner apparatus which has the ability to convert the charge-operated signal from the piezoelectric transducer to the ...
MEGGITT SA
... and SD-Cardslot this OEM device which is individually expandable. The FOTEMP1-OEM-MNT, Single-channel-OEM miniature signal conditioner can be controlled directly using the FOTEMPAssistent“ software. ...
... incrementally at lower cost. Provides 4-20 mA output proportional to shaft radial vibration. Dynamic signal is available at the signal conditioner or remotely
Metrix Instrument Co.
APPLICATIONS Conditioning of any kind of analog signal coming from a sensor to fit with data acquisition systems or Programmable Logic Controller (PLC) Electrical and physical measurement: strength, torque, pressure, ...
CELIANS
... HMS IV. Via the ADAT interface, up to four BEQ II units can be connected, allowing for eight-channel recordings. Integrated signal conditioning allows common measurement sensors (Microphone, Line, ICP®) to be directly ...
... in zone 2 SIL 2 Country of origin - DE Weight - 115 g Technical Data Signal type - Analog output (HART transparent) Device type - Analog signal isolator - Output field side Ex version ...
Signal conditioners protect signal transfer between field devices in safe areas and control systems by galvanic isolation of the loop. Particularly in case of long transmission paths, ...
... the signal conditioner line. The SC-System offers powerful modules for analog and digital measuring signals – from the isolating amplifier to the highly functional temperature converter ...
Connection box for low level signals CMLIB A is used for connecting the low level signal outputs of a CMC for measurement or controlling purposes. It can also be used to connect the inputs of a CMS ...
Compass SC1 & SCD1 - NEW "All-in-One" Signal Conditioner Solartron’s new signal conditioner accepts any standard LVDT or Half bridge analogue probes with 5 Pin DIN connectors. ...
Compass SC1 & SCD1 - NEW "All-in-One" Signal Conditioner Solartron’s new signal conditioner accepts any standard LVDT or Half bridge analogue probes with 5 Pin DIN connectors. ...
PCB Piezotronics GmbH
PCB Piezotronics GmbH
PCB Piezotronics GmbH
... .0-9.9 second) ●Target Reached Confirm (enable / disable) ●Brake Signal Hold Time (start off / next start off) ●External Start Input Control ●External Reverse Input Control ●Signal output (Start,Stop,Reverse)
The MTL1000 range of signal conditioning isolators and accessories are designed to help protect field instruments and control systems to provide safe, reliable and high-quality process communications. This cost-effective ...
The PMX-24 converts potentiometric sensor signals into a proportional analogue output size. Special features such as the galvanic isolation, the integrated cable break detection, or the configurable outputs guarantee ...
Multi-channel sensor switch Use for connecting Hot Disk sensors when testing multiple samples.
The model 84828 Slimline Signal Conditioning Card is compact, analog signal conditioner for use with all Jewell Instruments miniature tilt sensors. Each 84828 card operates one single ...
Jewell Instruments
The model 84800 is a compact, high performance signal conditioner for use with all Jewell Instruments miniature tilt sensors. Each 84800 conditioning card will drive one tilt channel (X or Y), and one ...
Jewell Instruments
... response to produce a high‐level DC output signal. Output is ±8 VDC single‐ended (±16 VDC differential). Units conveniently come with two switchable gain and filter settings (high/low; on/off) for added signal processing ...
Jewell Instruments
• Power on indicators. • Low pass / Highpass Filters available. • 9 – 30 V DC power input – ideal for +24 V DC output, compatible with all DJB Accelerometers and those of other manufacturers. • DIN Rail Mounting for applications requiring ...
DJB Instruments UK Ltd
... Measurement Seismic Vibration Measurement Safety monitoring The VB range are low cost, battery powered, single channel IEPE signal conditioning units. Using BNC input and output they provide LED indicators for power, ...
DJB Instruments UK Ltd
... Vibration Measurement Seismic Vibration Measurement Crash Testing Auto/Aero Structural Body Surveys The DCM-03 MEMS DC signal conditioner is for use with DJB’s range of AM, AMB and AMT variable ...
DJB Instruments UK Ltd
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining