Zimmer clamping
... of effort you immediately have a flexible bench drilling machine. By attaching a Vise on the clamping device, and a magnetic drilling machine over the clamp plate, one can easily ...
Clamping force: 7.6 kN - 259 kN
... Characteristics Your Benefits Customised application – By varying the number of Locking Elements, size and quantity of clamping screws, the connection can be adapted to fit most applications concerning surface pressures, ...
CIVI 2000 and CIVI SINTERGRIP is a new interesting modular Multi-Clamping system that reduces downtime and maximizes machine tool productivity. CIVI SinterGrip: Complete base set with: 1 base (length optional), 1 fixed ...
OML
Clamping force: 2,500 N - 200,000 N
The KE … FHK clamping unit is a spring activated product which has a hydraulic release which make it useful for operations such as continuous piston rod clamping. The unit has holding forces which ...
SIAM RINGSPANN
Clamping force: 1,000 N - 6,300 N
Features - Clamping Unit - Sizes 40, 50, 63, 80 or 100 are available - Spring activated - Pneumatically released - No wear adjustment
SIAM RINGSPANN
Clamping Systems RTM 601 for integrated torque motors for mounting and centring rotors Features - Provides a mechanical connection and centring between rotor and machine shaft - Backlash free, torsion-proof transmission ...
SIAM RINGSPANN
BAND-IT's standard tool with an adapter built in for Junior® Smooth ID clamps. For use on band widths of 1/4" to 3/4" (.015" - .030" thickness). Drop forged tool with built in cutter, spring loaded gripper lever improves ease of use. ...
BAND-IT
The Single Deck High Temperature Hydraulic Nut (HTHN) is capable of tensioning all of the studs on any valve, flange or cover simultaneously, loading 100% of the fasteners. This provides for complete elimination of distortion and ensures ...
Clamping force: 20 kN
... sub-part clamp and the sub-part stop enable workpieces to be clamped on the front face. This allows the full area of the machine table to be used to clamp the workpiece. Hold-down effect due to inclined ...
HALDER France
The floating clamp is used to clamp and support additional clamping points on components. The benefits of the floating clamp are: Avoids vibration during the ...
HALDER France
... Floating clamps with separate clamping and locking are used to clamp and support additional clamping points on extremly pliable workpieces. Both, clamping ...
HALDER France
LAE clamps Series: LAE140 Electric power clamps, size 140
Emile Maurin Eléments Standard Mécaniques
Emile Maurin Eléments Standard Mécaniques
Emile Maurin Eléments Standard Mécaniques
EASYCLAMP -a Popular clamp tool for plastic injection molding in Japan- Quick yet reliable mold replacement is realized thanks to its unique structure. One type of EASYCLAMP can fit 4 different heights just turning the ...
Clamping force: 400 N - 5,000 N
Pneumatic Clamping Element For rails : 15 to 65 mm Type: Closed without pressure Body in steel Operating temp. -20°C to 80°C Operation Pressure 5,5 to 8 bar
FLI - France Linéaire Industrie
Clamping force: 650 N - 3,000 N
Pneumatic Clamping Element For rails : 15 to 65 mm Type: Open without pressure Body in steel Operating temp. -20°C to 80°C Operation Pressure 5,5 to 8 bar
FLI - France Linéaire Industrie
Clamping force: 1,300 N - 3,000 N
Double Piston Clamping Element For rails : 20 to 45 mm Type: Open without pressure Body in steel Operating temp. -20°C to 80°C Operation Pressure 5,5 to 8 bar
FLI - France Linéaire Industrie
Clamping force: 0 N - 12,000 N
Body in spheroidal graphite cas iron of high resistance protected by epoxy paint. Double ribbed reinforced body. Grooved and zinc plated pat at screw. Adjusted milled and grooved anvil. Rolled, browned screw with trapezoidal thread. ...
DOLEX SER
Clamping force: 0 N - 12,000 N
Body in spheroidal graphite cas iron of high resistance protected by epoxy paint. Double ribbed reinforced body. Grooved and zinc plated pat at screw. Adjusted milled and grooved anvil. Rolled, browned screw with trapezoidal thread. ...
DOLEX SER
Clamping force: 0 N - 12,000 N
Body in spheroidal graphite cas iron of high resistance protected by epoxy paint. Double ribbed reinforced body. Grooved and zinc plated pat at screw. Adjusted milled and grooved anvil. Rolled, browned screw with trapezoidal thread. ...
DOLEX SER
WELDING TABLE EQUIPMENT SET 1 for Manufacturing Frames
FÖRSTER welding systems GmbH
Well thought-out and easy to handle, robust and tried and tested.
FÖRSTER welding systems GmbH
Well thought-out and easy to handle, robust and tried and tested.
FÖRSTER welding systems GmbH
Materials: flexible PVC Colours: transparent (indoor use) black - grey - yellow (outdoor use) Temperatures of use: -20 to +60°C Hardness Shore A: 85 ±5 Tensile strength at break: >20 MPa Ultimate elongation: 300 % Dielectric strength: ...
Material: nitrile rubber Colour: black Temperatures of use: -20 to +85°C Tensile strength: > 14 MPa Ultimate elongation: 400 % Chemical resistance: • good resistance to solvents • good resistance to ozone • good resistance to ...
Clamping force: max 120.0 kN
• side operation • low profile • with through-hole thread
JAKOB Antriebstechnik GmbH
Clamping force: 250, 80, 40, 180, 140 kN
SC – power clamping screw • wedge mechanism as force booster • high clamping force - low tightening torque • high operation safety • simple manual operation
JAKOB Antriebstechnik GmbH
Clamping force: 60 kN - 200 kN
• high clamping forces - low tightening torques • with bottomed thread - thread protected • centered operation • compact design - up to 200° C (optional up to 400°C)
JAKOB Antriebstechnik GmbH
... & RISERS 52/96 COMBO PLATES & RISERS SINGLE PLATES MASTER GAUGING PLATES ADAPTER PLATES RISER BLOCKS MULTI PLATES CLAMPING BRIDGES for 4-AXIS TWIN BASES TOMBSTONES 3-FACED PYRAMIDS COLLECT CHUCK ROUND BAR ...
The build-up of the oil pressure within the clamping system occurs via the machine mechanism. The clamping area is pressurized to ensure a secure clamping of the component. The clamping ...
König mtm GmbH
The build-up of the oil pressure within the clamping system occurs via the machine mechanism. The clamping area is pressurized to ensure a secure clamping of the component. The clamping ...
König mtm GmbH
The build-up of the oil pressure within the clamping system occurs via the machine mechanism. The clamping area is pressurized to ensure a secure clamping of the component. The clamping ...
König mtm GmbH
... pipe or shells. All surfaces of the Rim Clamp in contact with the pipe are made of stainless steel enabling the Clamp to be used on a variety of materials.Mathey Dearman Rim Clamps will ...
Mathey Dearman
This is an Eccentric clamping device manufactured by Andilog Technologies which is designed for a sample which has one inch wide and a 0.375 in thickness. It features its functionality of having a self-closing cam clamps ...
Clamping force: 2.7 kN - 17.6 kN
... stroke).After the swing strike (swivel movement) has been completed, the actual clamping stroke is initiated.Swivel- and clamping stroke result in the total stroke.The swing clamps are ...
Clamping force: 1.4 N - 6.6 N
Compact Swing Clamp Hydraulic, max. 230 bar, double acting This swing clamp is interchangeable to competitive link clamps. Available as plug-in and manifold mounting type. - Mechanically insensitive - ...
Clamping force: 1.8 kN - 21.2 kN
Standard Swing Clamp Hydraulic, max. 350 bar, Single- and double acting These swing clamps are offered as a superstructure version and can be operated by means of the lateral threaded connections ...
... layers of paving blocks at a time. Mostly applied in conjunction with sandblasting machines. Available with 2 or 4 sided clamping, depending on the size and shape of the paving blocks. Further information • - ...
... precise. To secure the building material, the user pushes on the top clamping element with one foot. When the user takes their foot off the non-slip tread, springs push the clamping elements apart again ...
... compressed air, it does not cause any contamination. Different clamping directions The RotoClamp clamping systems are available in an internal clamping - RotoClamp Inside - and ...
HEMA Maschinen- und Apparateschutz GmbH
... DiskClamp also has an emergency braking function that effectively decelerates loads in the event of a pneumatic failure. A clamping system alone is sometimes not enough Some applications are about more than fixing ...
HEMA Maschinen- und Apparateschutz GmbH
PClamp is a modular built system for the secure clamping of rod loads and pneumatic cylinders. It can be adapted to standard systems such as pneumatic cylinders of leading manufacturers (e.g. SMC, Festo) or to individual ...
HEMA Maschinen- und Apparateschutz GmbH
Clamping force: 30,000 N
The multiple clamping system MMS allows positioning and clamping of two or more workpieces at the same time. By using a number of clamping elements in a longitudinal ...
Spreitzer GmbH & Co. KG - Präzisionswerkzeuge
... range Maximum access Material: steel Finish: hardened, black-finished Only 3 – 5 mm clamping depth necessary Clamping from outside to inside (external clamping) Pairing accuracy ...
Spreitzer GmbH & Co. KG - Präzisionswerkzeuge
Clamping force: 6 kN
The 4-point clamping unit of the zero-point-clamping system MZP allows a quick, simple and time-optimized positioning and clamping of workpieces or fixtures on the machine table. Different ...
Spreitzer GmbH & Co. KG - Präzisionswerkzeuge
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining