... ALUMESS.easyloc Starter Set Laser Marking | Laser Engraving – Ready to Run, Easy to Change Over The ready-configured, modular fixturing system for laser marking and laser engraving. Our ALUMESS.easyloc sets for laser marking systems are the only ...
Spreitzer GmbH & Co. KG - Präzisionswerkzeuge
... -Down Clamp Sets – Versatile and reliable workpiece fixation From gentle holding to powerful clamping – the right hold-down clamp for every measuring, inspection and laser task. The ALUMESS.easyloc ...
Spreitzer GmbH & Co. KG - Präzisionswerkzeuge
... Precision Vise Set – Complete Kit for Measuring and Inspection Applications This comprehensive set combines three mini precision vises with a wide range of accessories for precise clamping, measuring ...
Spreitzer GmbH & Co. KG - Präzisionswerkzeuge
Clamping force: 65, 25, 110 kN
... The smooth jaw workholding clamps are specifically engineered to securely hold your workpiece without leaving any visible marks or scratches. Our smooth jaw clamps are among OK-VISE’s oldest designs and remain a popular ...
OK-VISE
Clamping force: 100, 55, 22 kN
... as plastic, aluminium or steel, depending on the workpiece material. M5 thread lenghts: - B-size clamp = 4mm - D- and F-size clamps = 7mm N.B. There are also several sizes of additional pieces available, ...
OK-VISE
Clamping force: 25, 65, 110 kN
... The serrated jaw workholding clamp is designed to create high friction between your workpiece and the clamp, ensuring the consistent and reliable clamping you need. These clamps are among OK-VISE’s ...
OK-VISE
... PROFILE CLAMPING BRACKET Attaching and tightening clamp for profile capture conductor systems and down conductors for external lightning protection systems. In addition to the pressure screw, it comes ...
Clamping force: 30 N
... Quick action enables automation of
multiple
clamping points and frequent fixture changes.
Pneumatic Pin-Holding Clamps
- Features -
- Air-operated fastener that instantly clamps
Imao Corporation
Clamping force: 400, 200 N
...
- Features -
- Multi-purpose quick lock with one-touch operation.
- Clicking action ensures consistent clamping force and secure locking.
- Suitable for various objects and sizes.
- Available with a cost-effective
Imao Corporation
Clamping force: 1,100 N - 3,500 N
... One-Touch Clamps
Mechanical quick
clamps developed for machining fixtures.
Quick and easy
clamping by turning the handle slashes setup time.
Spiral cam mechanism delivers strong
clamping ...
Imao Corporation
... the edge of the table or similar • Clamping base 20sz, Opening 40mm, 80 x 20 x 40 mm, 2 x M6 (Art.# 5.202) • Clamping base 30sz, Opening 40mm, 80 x 30 x 50 mm, 2 x M8 (Art.# 5.204) • Clamping ...
Clamping force: 490 N - 12,040 N
... - Highest locking reliability - High locking force (higher than the one developed by the cylinder @ 10 bar) - Compatible with all manufacturers' cylinders in the market - Shaft locking option (to be used without a pneumatic cylinder) - Manual un-lock, ...
... The PSL-G model is a non-self-centering clamping device. It comes with an Easy Open System, which makes it easy to dismount. Likewise, the model is optionally available with a surface coating. From 289 to 13‘500 Nm Frictional ...
... The SMA model is a self-centering clamping set, which impresses with its high transmission forces. It is equipped with the Easy Open System for easy assembly and disassembly. From 216 to 1‘705 Nm Frictional connection ...
... The PSL-D model is a non-self-centering clamping device. It comes with an Easy Open System, which makes it easy to dismount. Likewise, the model is optionally available with a surface coating. From 6 to 1‘760 Nm Frictional ...
... Aluminium clamping block SB 65, with cooling fins clamping diameter 65 mm flange 100 mm height 83 mm ...
... Design: Pneumatic clamping station for setting time-optimised clamping on machine tables with groove spacing of 63, 100 and 125 mm. Fastening is via M12 socket head screws. At least two fitting bores are attached for ...
ANDREAS MAIER GmbH & Co. KG (AMF)
Clamping force: 17, 10 kN
... bar. K20.3 min. 4.5 bar. Steel, unhardened. Repeat accuracy < 0.005 mm. Design: Pneumatic clamping station for setting time-optimised clamping on machine tables with groove spacing of 63, 100 and 125 mm. Fastening ...
ANDREAS MAIER GmbH & Co. KG (AMF)
... Product Overview
- Product: Substrate Plate Clamping System
- Brand: AMF (ANDREAS MAIER GmbH & Co. KG)
- Application: Additive manufacturing — precise clamping and positioning of substrate
ANDREAS MAIER GmbH & Co. KG (AMF)
The fast-clamp driving dogs are used to pull the workpiece when it is fixed between two drills. They are highly useful in mass grinding processes. In fact, their high-speed opening and closing allows a significant reduction in the time necessary for changing ...
... >
Overview
Carriage
clamping units VZKP are used to
clamp the spindles of linear units after adjustment. The thread of the adjustable hand lever tensions the wedge mechanism, creating friction between the
clamping ...
Clamping force: 0 N - 12,000 N
... Body in spheroidal graphite cas iron of high resistance protected by epoxy paint. Double ribbed reinforced body. Grooved and zinc plated pat at screw. Adjusted milled and grooved anvil. Rolled, browned screw with trapezoidal thread. Long tommy-bar. Full ...
DOLEX
Clamping force: 0 N - 12,000 N
... Body in spheroidal graphite cas iron of high resistance protected by epoxy paint. Double ribbed reinforced body. Grooved and zinc plated pat at screw. Adjusted milled and grooved anvil. Rolled, browned screw with trapezoidal thread. Long tommy-bar. Full ...
DOLEX
Clamping force: 0 N - 12,000 N
... Body in spheroidal graphite cas iron of high resistance protected by epoxy paint. Double ribbed reinforced body. Grooved and zinc plated pat at screw. Adjusted milled and grooved anvil. Rolled, browned screw with trapezoidal thread. Long tommy-bar. Full ...
DOLEX
... easy installation of disc nozzles on manifolds. These clamps are very convenient as there’s no need to buy expensive nipples threaded or welded. Just drill a 19 mm hole in the pipe, insert the clamp into it and screw ...
... ZPF swivel clamps are specially designed for the HGQ, RGN and ZBA series. To install ZPM clamps on pipes, you only need to drill a hole, insert the nozzle clamp inside and fasten it with a simple screwdriver. ...
... ZPQ cam and lever clamps are specially designed for HGQ, RGN and ZBA ball nozzles. Only three steps to install them on a pipe: drill a hole, wrap the cam around the pipe and pull the lever down to block it. No need of tools. The body ...
... large 3-axis tables and clamping bridges, it ensures drastic savings as it does not require a zero-point base plate. Set-up speed and flexibility are once again key with Quick•Point® Rail! The seamless alignment of the clamping ...
... Far-Pul™ HD® Belt Clamps are specially designed to properly secure and clamp a belt for safe conveyor maintenance. • Design: Clamp bars with adjustable steel scissors, retaining pins, and clamp ...
... TUG™ HD® Belt Clamps are designed to secure the belt for belt repair meeting the most stringent safety test standards. Available in 6 and 8 ton versions, TUG HD Belt Clamps provide even tensioning across the entire belt ...
... Faster and stronger than bolt clamping methods, SmartClamp™ Belt Clamps ensure clamping pressure is evenly distributed over the entire clamp surface keeping belt integrity intact and ...
... The PLIO® flexible PVC perforated strapping can be used to fix and bind cables and cable harnesses, cords, wires and tubes. Available in transparent (for indoors), black - grey - yellow (for outdoors). Temperatures of use: -20 to +60°C Hardness ...
... The HELAVIA® strapping, made of black nitrile rubber, can be used outdoors (weatherproof) to secure large cables, pipes or other items. Elastic and flexible, it won't damage cable bundles. Temperatures of use: -20 to +85°C Tensile strength: > 14 MPa Ultimate ...
... Suitable for clamping glass slides 28 mm x 48 mm Stops can be recessed via an integrated handwheel for plan-parallel grinding of the ceramic stone. A vacuum pump is required to generate the vacuum For use on: Qcut 150 A/M ( clamping ...
QATM
Clamping force: 1,000 N
... mm Screw clamp (Qtool 40 S) with star handle to manually dose the clamping force Eccentric clamp (Qtool 40) for fast and powerful clamping Rear stop adjustable for optimal position ...
QATM
Clamping force: 2,000 N
... 60 mm | W = 100mm Eccentric clamp for fast and powerful clamping Adjustable rear stop (50mm) for optimal position during cutting Diverse jaw program Optionally expandable with cross stop With the wide range of ...
QATM
... Single-Wire Pneumatic Hose Clamp Tool Accommodates Rotor Clip HC and HW single-wire hose clamps. ...
... Double-Wire Pneumatic Hose Clamp Tool Accommodates Rotor Clip DW double-wire hose clamps. ...
... CTB Pneumatic Hose Clamp Tool This one-size-fits-all tool is suitable for any Rotor Clip Constant Tension Band hose clamp. ...
... compressed air, it does not cause any contamination. Different clamping directions The RotoClamp clamping systems are available in an internal clamping - RotoClamp Inside - and an external clamping ...
HEMA Maschinen- und Apparateschutz GmbH
... DiskClamp also has an emergency braking function that effectively decelerates loads in the event of a pneumatic failure. A clamping system alone is sometimes not enough Some applications are about more than fixing a shaft. Involved ...
HEMA Maschinen- und Apparateschutz GmbH
... PClamp is a modular built system for the secure clamping of rod loads and pneumatic cylinders. It can be adapted to standard systems such as pneumatic cylinders of leading manufacturers (e.g. SMC, Festo) or to individual solutions. Functional ...
HEMA Maschinen- und Apparateschutz GmbH
... Designed for holding insulated cables and wire. The sample is secured by the cam, which self-tightens as a load is applied and spreads the load evenly. Serrated cams are preferred for materials which may be slippy and so need a 'bite' into the outer ...
... Large Pneumatic Plane Grips from Mecmesin are pneumatically-operated grips. These devices use a parallel vice action to securely hold the flat samples in place. The grips are built with 50x30 mm cross-hatch knurl faces which are applicable ...
... variety of specimens to test. The model is pneumatically-operated, and has a body made of aluminum. It utilizes a parallel vice action in order to hold grip-sensitive, flat specimens tightly. The unit comes with a rubber-coated face ...
... Rigid clamp for fixing to all profiles Standard with pivoting Slot nut and screws ...
ZIMMER GROUP
... Adjustable clamps for fixing to all profiles Standard with pivoting Slot nut and screws ...
ZIMMER GROUP
... Available for M8-M36 You can use a clamping flange made of nickel-plated steel to connect the shock absorber to the structure more easily. After being fully screwed in, the shock absorber is clamped tightly to the clamping ...
ZIMMER GROUP
Clamping force: 4,000 N
... The mini clamping system with tightening via eccentric, resulting in a very low space requirement. The eccentric ensures precise, fast and powerful clamping (4000 N). With a height of less than 6 mm ...
KOPAL CAROSSINO
Clamping force: 6,500 N
... Comprising : 2 Mini driving clamps 09-110 1 Mini ƒOxed clamp / locator 09-150 (with screw and index) Made of spring steel (with clamping screw and positioning pin) Low mini driving clamp ...
KOPAL CAROSSINO
Clamping force: 10,000 N
... kit 09-451 10000 Newton Comprising : 1 Driving clamp 09-090 (2 x M6 clamping screws) 1 standard moving 09-610 clamp / locator 1 standard M 10 09-140 clamp / locator Clamping ...
KOPAL CAROSSINO
Clamping force: 20 kN
... sub-part clamp and the sub-part stop enable workpieces to be clamped on the front face. This allows the full area of the machine table to be used to clamp the workpiece. Hold-down effect due to inclined arrangement ...
HALDER France
... The floating clamp is used to clamp and support additional clamping points on components. The benefits of the floating clamp are: Avoids vibration during the processing ...
HALDER France
... Floating clamps with separate clamping and locking are used to clamp and support additional clamping points on extremly pliable workpieces. Both, clamping and supporting ...
HALDER France
... Accommodate high working loads and a wide degree of field-adjustable grip with these all-metal adjustable clamps. Description Spec Material : Stainless Steel 304 ...
... >
- 6 pieces clamping arm with clamping element ø 30 mm with brass pressure piece
- 6 pieces clamping column complete, ø 30 mm x 350 mm
- 4 flat clamps with stainless-steel
FÖRSTER welding systems GmbH
... pieces clamping arm with clamping element Ø 30 mm (with brass pressure piece where specified)
FÖRSTER welding systems GmbH
... Pipe Construction
- 6 clamping arms with clamping element Ø 30 mm
- 6 clamping columns complete, Ø 30 mm x 350 mm
- 4 tension towers complete, Ø 50 mm x 900 mm
- 4 clamping
FÖRSTER welding systems GmbH
the best suppliers