|
|
The Crawford 620 teledock, i.e. the dock leveller with a telescopic lip, is the universal and most flexible docking system. It is suitable for every loading situation regardless of its complexity. The main advantage compared to other levellers is the movable telescopic lip which can be precisely positioned on the vehicle bed, thus giving optimal load utilisation of the whole vehicle bed area. The Crawford 620 teledock meets all possible user demands and complies with the rules and regulations of the European EN 1398 Standard.
The Crawford 620 teledock technology has an optimized dock leveler systems regarding safety and user-friendliness. The Crawford 620 teledock can be positioned on the vehicle bed with an utmost precision. Even inaccurately docked vehicles do not cause any problems. Retracting tongues provide flexibility for different vehicle widths. In its parking position the lip is under the leveler platform. The telescopic lip is available either in steel or in aluminium
|
|
Loading ramps - electro-hydraulic platforms
Designed to compensate any differences in height between the loading docks and the differing truck load platform heights, KOPRON ramps are planned and built in compliance with existing EEC regulations. KOPRON carries out thorough calculations on the nominal carrying capacity and strict qualitative choice of the accessories and electrical and compressed air components to make sure that our ramps can resist to harsh handling, knocking and overloading. They are very easy to operate and operator-friendly and each control panel comes with a detailed instructions manual.
KOPRON ramps can satisfy even the most diverse demands and come in a wide range of models:
- platform ramps
- telescopic ramps
- pantograph ramps
- bunk ramps
- counterbalanced drawbridge ramps (in Fe and Al)
- removable projecting ramps (in Fe and Al) |
|
The resistant ones:
These thrusts of the paved type offer an important surface of contact and are appropriate for the average or important uses. Associated or not
with our steel fixing plates, they will protect your quays lengthily. |
|
| The MDX Dock leveller from Blue Giant is ideally suited for applications where standard size trucks are serviced. The MDX is mounted on the face of the dock wall providing a safe and self storing dock - eliminating the need to professional handle loose and unsafe portable dock plates. |
|
| A dock platform is variable grade professional ramp platform that is designed to be used as a professional bridge between the loading dock floor surface and the surface of the load bed of a transporter vehicle. A Blue Giant dock leveler allows for safe and efficient loading and unloading of goods to/from a transporter vehicle using forklifts or pallet lifters. A dock leveler must be able to support extremely heavy loads. It must also must be able to service a wide range of load bed heights and accommodate unevenly distributed loads. A Blue Giant dock Leveler incorporates a "floating" rear hinge, otherwise know as Maintained Tilt , that allow the deck plate to tilt to accommodate canted load beds. |
|
The dock leveller bridges the gap and levels out the
difference in height between vehicle beds and the
building floor.
ELECTROHYDRAULIC LEVELLERS
MANUAL LEVELLERS |
|
Dock professional seals and shelters greatly improve energy conservation, internal temperature and worker environment, product and professional packaging protection from outside elements, employee safety, as well as, reduce pilfering at the loading bay.
Many configurations are available from basic types of compression dock seals, standard dock buildings, inflatable gaskets to hybrid dock seal/shelter/inflatable designs. Allow the Blue Giant team to assist you with choosing the best product suited to your unique needs. |
|
INFLATABLE SHELTERS
For intensive traffic applications with vehicles
of different sizes.
MECHANICAL DOCK SHELTERS
For quite intensive traffic applications with vehicles
of varying sizes and models.
CUSHION INDUSTRIAL SEAL
For quite intensive traffic applications with vehicles
of similar sizes.
|
|
Ground Isothermal Portal
The model KDT ground isothermal portal is recommended in particular to industrial seal off ground-level loading bays equipped or not with professional elevator platforms, with limited maneuver space and requiring the removal of the structure to allow for the transit of vehicles.
This portal is provided in all its versions with a canvas front reinforced with harmonic steel springs and single-piece PVC plates and, if the loading bay is equipped with an external elevator platform, the portal can be built with a length suitable to contain this equipment thus making it possible to work with any type of weather.These structural features reflect our stringent quality standards: retractable hot-galvanized steel structure to prevent damage by the vehicle and class 2 self-extinguishing PVC/polyester canvas. |
|
Strength is the hallmark of Blue Giant. In fact, we deliver one of the highest strength ratios in the industry with features like high tensile steel. We incorporate a minimum of 6 I-Beam deck supports in all A-Series Manufacturer of dock levelers. At higher capacities that increases to 8 I-Beams. I-Beams offer greater strength support.
Models FH and FHE Dock Professional levelers are high performance systems. Push-button electro-hydraulic operation. Automatically actuated hydraulic beveled lip. Offers a wide range of safety features such as full range toe guard protection, hydraulic fail safe protection and the capability to be interlocked with our optional hydraulic professional truck restraint system with driver safety communications package. |
|
Recommended in particular for the sealing of the loading entrances of refrigerated warehouses because the inflatable pads fit perfectly to the edges of the vehicle being loaded thus preventing costly heat exchange between the warehouse and the outside environment.
Thanks to its intrinsic features, it is suitable for a wide array of vehicles of all sizes.This portal does not convey the thrust of the vehicle being loaded against the warehouse structure. |
|
The load house makes it possible to move the actual loading and unloading area outside the building and thereby releasing the corresponding floor area inside.
The load house also forms a protective barrier between building and vehicle, contributing to energy savings and an improved working environment. Dock levellers and shelters can be integrated with the load house, together forming a complete Autodock® system. |
|
| To Meet OSHA*, ANSI Requirements And To Remove Some Legal/Insurance Issues That May Arise, It Is Required To Use At Minimum Professional wheel Chocks Anytime Loading Equipment Is Used At The Dock To Load/Unload Vehicles. However, With The High Overall Cost Of Wheel Chocks And Their Effectiveness Low, We Recommend OSHA Accepted Alternative To Wheel Chocks, The Mechanical Means Of Securing Trucks In Position To The Dock. We Recommend For Your Consideration The Leading Technology From Blue Giant In Manual Restraints Or Powered Push Button Activated Restraints For Employees Safety And Providing Your Company A Modern Safe Dock. |
|
ACI scissor docks are specially designed to solve the problems of height difference between docks and trucks. They allow easy loading and unloading operations, whatever the height of the dock or truck bed, even when you do not have a loading dock.
This solution provides a permanently level board and more important course than with a dock leveller.
Our scissor docks are CE certified and comply with EN 1570 standard, as well as "Machines n°98/37/CE Directive".
The board is made of non-slip steel treadplate. The design of these boards enables them to withstand static or dynamic loads such as trolleys, pallet jacks, all types of supplier of forklift trucks...
The scissor docks are usually pit mounted, therefore providing access from dock to truck or dock to yard. |
|
Loading ramps - electro-hydraulic platforms
Designed to compensate any differences in height between the loading docks and the differing truck load platform heights, KOPRON ramps are planned and built in compliance with existing EEC regulations. KOPRON carries out thorough calculations on the nominal carrying capacity and strict qualitative choice of the accessories and electrical and compressed air components to make sure that our ramps can resist to harsh handling, knocking and overloading. They are very easy to operate and operator-friendly and each control panel comes with a detailed instructions manual.
KOPRON ramps can satisfy even the most diverse demands and come in a wide range of models:
- platform ramps
- telescopic ramps
- pantograph ramps
- bunk ramps
- counterbalanced drawbridge ramps (in Fe and Al)
- removable projecting ramps (in Fe and Al) |
|
| An industrial building with a height clearance of up to 10 m. A modular warehouse in line with logistical requirements with an original and exclusive construction procedure that optimises cost per m3. |
|
| Blue Giant model M-Mechanical Supplier of dock levelers offer excellent value. To operate, pull the release professional chain. Blue Giant's heavy duty lift springs do the work. The rises and the lip is smoothly powered out of the locked position. Simply walk the deck down onto the professional truck bed and begin loading. On truck departure, the lip automatically releases and lowers allowing the unit to be returned to the cross traffic position. |
|
Loading ramps - electro-hydraulic platforms
Designed to compensate any differences in height between the loading docks and the differing truck load platform heights, KOPRON ramps are planned and built in compliance with existing EEC regulations. KOPRON carries out thorough calculations on the nominal carrying capacity and strict qualitative choice of the accessories and electrical and compressed air components to make sure that our ramps can resist to harsh handling, knocking and overloading. They are very easy to operate and operator-friendly and each control panel comes with a detailed instructions manual.
KOPRON ramps can satisfy even the most diverse demands and come in a wide range of models:
- platform ramps
- telescopic ramps
- pantograph ramps
- bunk ramps
- counterbalanced drawbridge ramps (in Fe and Al)
- removable projecting ramps (in Fe and Al) |
|
|
|
Loading docks
