|
|
|
From aggressive zirconia alumina snagging wheels, to premium ceramic toolroom wheels, to the dressing sticks that keep our wheels performing at maximum productivity, the Norton bonded abrasive product line can meet all your rough and precision application needs - with grinding wheels, cut-off wheels, snagging wheels, segments, mounted points, cones and plugs, dressing sticks and sharpening stones.
|
|
Discs - Regular
These discs are made of a non-woven, three-dimensional, open web that provides a uniform, consistent finish without undercutting or gouging the work piece. A wide variety of sizes and grades cover all cleaning, deburring and finishing needs.
High Strength
High strength discs are designed to do light deburring, oxide and light coating removal, stainless steel finishing and satin finishing of aluminum extrusions. This is a highly conformable, long-lasting disc.
Metal Blending
Specially designed for blending and finishing stainless steel. Mineral coarseness blends surface scratches on many metals, wood and synthetic surfaces. Highly flexible and may be ganged on a shaft to use as a conformable wheel.
Production Clean and Finish
This Scotch-Brite disc delivers higher cut, longer life and a better finish. Used on aluminum, stainless steel, plastics, wood and fiberglass for finishing, paint preparation, surface blending and scuffing. Can be used singly or ganged on a shaft.
|
|
Thick, strong synthetic fibers and extra coarse abasive with a smear-resistant adhesive for quick and easy cleaning and conditioning.
Typical Applications
Removal of surface rust and residue, corrosion, light weld splatter, dirt, mill scale and other similar surface contaminants
Paint and epoxy coating removal
Surface prep before coatings are applied
Surface prep before welding
Cleaning and conditioning after welding
|
|
Ceramic Fiber Stones for ultrasonic tools.
Excellent heat resistance.
Features:
-XEBEC has successfully increased the resistance temperature from 100C to 200C in its Hear-Resistant Ceramic Abrasives.
-Adding to the same performance of Meister Finish Tools(which doesn't break,doesn't crack), their durability has been enhanced for prolonged use with Ultrasonic tools.
-Ideal for removing EDM scales.
-Can be used to polish deep slits of ribs, at full length.
Usage:
-Ideal for precise polishing of free surfaces, free curves, ribs, bosses, etc., of various forming molds (especially plastic mold).
-High finishing efficiency can be attained without clogging, even for metals such as aluminum, copper, gun metal, etc., that clog with common abrasive stones.
-Use in narrow areas where common abrasive stones cannot be used because thay'll break.
-Use on complex shapes where uniform finishing could not previously be attained.
-Efficient EDM scale removal.
|
|
Segments are by far the best product for high metal removal rates.
We supply hundreds of different shapes and sizes, in specifications specially formulated for each application.
|
|
|
|
|
|
The demands on modern automotive engine and gearbox producers continue to increase. The additional requirements create capacity bottlenecks, and an increased demand for more efficient grinding solutions. TYROLIT faces this challenge in external cylindrical grinding with a new generation of vitrified bonded CBN high performance grinding tools.
After intensive research, TYROLIT has succeeded in developing GENIS, a new bond system that makes it possible to guarantee optimal wetting of the CBN grain even with the lowest levels of bond content. Through careful choice of the composition of the bond components, the crystallization is specifically controlled under selected firing conditions. This makes it possible to achieve porous structures with high mechanical strength that exhibit maximum resistance to the effects of cooling lubricants.
The cool grinding specifications of the GENIS high-performance tools allow a reduction of the grinding forces, and make efficient use of the CBN grain. Decreasing grinding forces are confirmed in practice with a wide range of application possibilities, through minimum tool wear and maximum profile retention.
|
|
|
Metal bond CBN wheels are used for vertical spindle surface grinding of tool materials, fluting and gash grinding of end mills, and profile grinding in which the life and form of work pieces is essential.
|
|
|
Cranden Diamond Products are proud to have developed a new generation of polyimide bonded grinding wheels. Specially formulated to maximise the performance of state of the art CNC tool and cutter grinding machines. Standard specifications combine good corner holding, long wheel life with an oustanding rate of cut. Reduced cycle times, improved surface finish and tool life.
|
|
CBN Grinding Worms are galvanically positive plated tools, which are applied, without dressing, for continuous generating gear grinding.
Highest demands concerning precision, performance and tool life are made on CBN Grinding Worms. This is achieved through our extensive experience of manufacturing this type of tool.
|
|
|
|
|
|
Abrasive Honing Stones
Honing stones from Bates Technologies are engineered and manufactured to optimize the performance of a variety of finishing processes. The abrasive stones are produced in our facility using a proprietary process and specialty bonds. We adhere to strict quality control procedures to give you consistent results time after time.
- Conventional Microabrasives - Our Vitrified and Resin bonds using aluminum oxide and silicon carbide are superior for cutting steel, iron, monel, stainless, cast iron, non-ferrous materials and plastic.
- Superabrasives - Our stones of Cubic Boron Nitride (CBN) accelerate stock removal and maintain a long abrasive life in ferrous material. Our Diamond stones, in turn, are excellent with cast iron, chrome and carbide.
- Honing Stones for use in Sunnen and Other Machines - Designed to fit standard Sunnen and other honing machines.
- Production Honing Stones - Created for specification for high volume applications.
- MicroMold Abrasives -- Encapsulated in plastic to extend the life of the honing tool.
|
|
Diamond and cubic boron nitride (CBN) are considered to be the hardest known grinding materials and are therefore often referred to as "super-abrasives". For this reason they are suitable for machining materials which are difficult or even impossible to grind with conventional abrasives such as silicon carbide or corundum.
Diamond and CBN have the same crystal structure, with diamond consisting of pure carbon, whilst CBN is made up of the elements boron and nitrogen.
|
|
Diamond and cubic boron nitride (CBN) are considered to be the hardest known grinding materials and are therefore often referred to as "super-abrasives". For this reason they are suitable for machining materials which are difficult or even impossible to grind with conventional abrasives such as silicon carbide or corundum.
Diamond and CBN have the same crystal structure, with diamond consisting of pure carbon, whilst CBN is made up of the elements boron and nitrogen.
|
|
Diamond and cubic boron nitride (CBN) are considered to be the hardest known grinding materials and are therefore often referred to as "super-abrasives". For this reason they are suitable for machining materials which are difficult or even impossible to grind with conventional abrasives such as silicon carbide or corundum.
Diamond and CBN have the same crystal structure, with diamond consisting of pure carbon, whilst CBN is made up of the elements boron and nitrogen.
|
|
|
|
|
|
The demands on modern automotive engine and gearbox producers continue to increase. The additional requirements create capacity bottlenecks, and an increased demand for more efficient grinding solutions. TYROLIT faces this challenge in external cylindrical grinding with a new generation of vitrified bonded CBN high performance grinding tools.
After intensive research, TYROLIT has succeeded in developing GENIS, a new bond system that makes it possible to guarantee optimal wetting of the CBN grain even with the lowest levels of bond content. Through careful choice of the composition of the bond components, the crystallization is specifically controlled under selected firing conditions. This makes it possible to achieve porous structures with high mechanical strength that exhibit maximum resistance to the effects of cooling lubricants.
The cool grinding specifications of the GENIS high-performance tools allow a reduction of the grinding forces, and make efficient use of the CBN grain. Decreasing grinding forces are confirmed in practice with a wide range of application possibilities, through minimum tool wear and maximum profile retention.
|
|
|
Centreless grinding, for circular components, is the most rapid technique to achieve surface finish and dimensional accuracy. Ours are renowned for cool cutting, even breakdown and extended dressing cycles.
|
|
Centerless grinding is a production process that produces extremely cose tolerances on metal cylindrical forms or parts.
Cylindrical Wheels are used most often when the part is held between centers and in chucks.
|
|
ABI's Convolute Wheel provides smooth running, smudge-free finishing on all types of metals. This wheel is excellent for applications ranging from deburring hardened steel parts to blending out imperfections and finishing exotic metals. The quality of finish and productivity is second to none and has proven itself in countless applications. The wheel is manufactured by wrapping layers of non-woven material impregnated with abrasive grain around a precision core. It is then bonded and treated with an adhesive that forms a solid wheel. While this dense wheel is extremely durable and aggressive, its consistency of finish and ease of use makes it an outstanding value.
Characteristics:
- Smudge-free
- Durable
- Long Life
- Fast Cutting
- Consistent Finish
- Cool Running
- Easy to Use
Applications:
- Surface Preparation
- Blending
- Deburring
- Cleaning
Tools:
- Portable Grinder
- Bench Motor
- Hand grinder
- Automatic Equipment
- Robotic Equipment
- Power Tools
- Hand tools
|
|
|
|
|
|
The demands on modern automotive engine and gearbox producers continue to increase. The additional requirements create capacity bottlenecks, and an increased demand for more efficient grinding solutions. TYROLIT faces this challenge in external cylindrical grinding with a new generation of vitrified bonded CBN high performance grinding tools.
After intensive research, TYROLIT has succeeded in developing GENIS, a new bond system that makes it possible to guarantee optimal wetting of the CBN grain even with the lowest levels of bond content. Through careful choice of the composition of the bond components, the crystallization is specifically controlled under selected firing conditions. This makes it possible to achieve porous structures with high mechanical strength that exhibit maximum resistance to the effects of cooling lubricants.
The cool grinding specifications of the GENIS high-performance tools allow a reduction of the grinding forces, and make efficient use of the CBN grain. Decreasing grinding forces are confirmed in practice with a wide range of application possibilities, through minimum tool wear and maximum profile retention.
|
|
XEBEC Cross-Hole Deburring Tool
Specially developed for the fine deburring@of@cross-holes. There are two types; the Ceramic Stone Type for point processing and the Alumina Fiber Rod Type for simultaneous deburring and inner wall polishing. The Ceramic Stone Type is also easy to use with a hand grinder.
|
|
|
These are precision cutting wheels featuring a layer of diamond or CBN bonded on the periphery of a highly rigid metal core. Various types of bonds (metal, resin, electroplated) and edge shapes (V-shape, R-shape, etc.) are available for many different purposes.
|
|
Small high-speed cut-off wheels
CGW small high speed cut-off wheels are designed for sharp, clean cutting action on carbon steel, stainless and other alloys.
|
|
|
The Carborundum cut-off wheel product line encompasses premium-performing reinforced and non-reinforced wheels for all popular portable and stationary machines and saws. Watch for color coded Good, Better, Best product tiering to help select the right cut-off wheel for your application.
|
|
The Norton abrasive cut-off wheel product line provides premium performance for all cut-off applications covering all portable and stationary machines.
Product Offering
- Portable grinder small diameter (1-1/2" - 6")
- Right angle grinder (4" - 9")
- Circular saw (6" - 8")
- High-speed gas/electric saw (12" - 16")
- High-speed walk-behind road saw (14", 18")
- Rail Cut (14", 16")
- Stationary machine large diameter (10" - 30")
- Chop saw (10" - 16")
Typical Applications
- Cutting sheet metal
- Cutting pipe
- Foundry/forge shops - gate/riser removal, cutting forgings
- Metal plate dimensioning
- Ship building - metal fabrication
- Toolroom - cutting drill bits, steel bar, tubing, metallurgical sectioning
- Construction - concrete/masonry work
|
|
|
PFERD Grinding & Cut-off Wheels offer world-leading performance. For free-hand, portable, chop and stationary saws.
|
|
Due to intensive co-operation with end-users we fulfill a variety of requirements regarding quality and cutting results on rail cutting.
Easy cutting
Short cutting time
Straight cuts, high cutting accuracy
White cutting area, no discoloration on the rail
Attractive price performance ratio
|
|
Reinforce Fiber Discs Bonded Cut off Wheels
DESCRIPTION : Reinforced Fiber Resin-Bonded Cut-off Wheels
- Reinforced Fiber Resin - Bonded Cut - off Wheels widely used for in cutting
various metals or non metal materials. 4" x 2 Double Net, 4" x 1.2 / 4" x 1.6 Double Net, 4" x 2 Single Net, 14" x 3, 16" x 3.
|
|
Cylindrical grinding wheels
O.D. - Outside diameter grinding
CGW offers a wide range of wheels for cylindrical grinding applications (O.D. Grinding) up to 25" (625mm) in diameter. The wheels are for general purpose use and are available in all abrasive types and profiles.
The wheels are for general purpose use and are available in all abrasive types and profiles.
General Types: 1 , 5 , 7, 20, 21, profile N.
Special profiles available on request.
General Abrasive types: WA , PA , AZ , RA , AS , GC , DA.
|
|
Multimatic I/E CNC has been designed for the simultaneous grinding of bores, shoulders and external diameters and is particularly suitable for grinding big lots of pieces.
The wheel carriages slide on preloaded hardened guideways, with needle bearing interposition and the movement of the axes, by means of brushless motors, is transmitted by high precision ball screws.
The internal grinding unit, with two CNC controlled axes, can carry out a number of grinding operations: internal diameters and/or shoulders, plunge cycles with CNC dressed wheels, etc. The external grinding unit is equipped with two CNC controlled working axes, at an angle to each other
|
|
Choose Carborundum bonded abrasive cylindrical wheels for grinding cylindrical components between centers. Available in GA aluminum oxide and GRA blended aluminum oxide formulations.
Centerless grinding wheels and rubber bond regulating feed wheels are used in thru-feed or plunge grinding applications. Use the DAC aluminum oxide and silicon carbide blend in a resinoid bond system for stock removal, long irregular parts and faster throughfeed grinding. Choose GRA aluminum oxide in a vitrified bond system for form holding and plunge grinding.
|
|
Bear-Tex Polybond wheels are manufactured by bonding abrasive grain into a foamed polyurethane matrix, similar to bonded grinding wheels, yet flexible and conformable. Polybond wheels are available in metal conditioning and wood finishing formulations.
Typical Applications
Metal Conditioning Wheels
- Heavy duty deburring applications
- High surface temperature applications
- Replacing wire brushes
- Finishing applications
Wood Finishing Wheels
- Wood mold profile sanding
|
|
|
|
Bonded abrasives, Grinding wheels
