|
|
| Products 121 to 150 of 237 |
SHARK-Drill® Catalogue
• SHARK-Drill®
• Cutting inserts
• VHM twist drills
Perfection: ARNO tools in use!
|
|
Pointing the way in solid drillingKOMET KUB® solid drills
For more than 30 years, the KOMET KUB® solid drill family has been developing into a leading tool concept. Through the use of high-performance hard metals and coatings of the latest generation, the cutters are optimally matched to the solid drilling process.
|
|
The Unidrill® product range is a replaceable insert system with the capability of drilling several diameters with one body. Both HSS and carbide inserts are available for drilling all materials.
Geometry CR Grade SP9336
(T15 High Speed Steel with TiAlN PVD coating)
For machining steels, cast irons (including nodular) and non-ferrous materials. This geometry has cross ground point, radial land, chip splitters and a corner protection radius.
Diameter range 10mm - 25mm / 0.390" – 1.000"
|
|
Indexable drills for steels and cast irons
(L/D2, L/D3, L/D4, L/D5)
Highest Productivity, Maximum Performance
New Wiper chipbreaker: -DW
- 2, 3, 4 and 5xd for different bore hole depths
- 4 different high performance cutting grades
- 3 different chipbreaker geometries
- Wiper technology
- Inserts with 4 cutting edges
- Suited for minimum quantity lubricating
- Eccentric sleeve
- Low vibration and low noise drilling of most different cutting materials
- High cutting parameter, reduced machining time
|
|
|
Find the toolholder that's right for your application. Available in most ANSI sizes, Tungaloy holders are manufactured to the highest quality standards. Check out our A-Type holders for strong clamping power and fast, accurate indexes
|
|
Walter provides its customers with yet another boost in productivity through the introduction of the two new drills from the Xtra-tec® series.
The Xtra-tec® Insert drill with two four-edged indexable inserts is ideal for full or spot drilling on inclined or spherical surfaces.
The Xtra-tec® Point drill is particularly convincing when producing short drill holes or through holes with additional chamfer.
Walter B4213
Increase in productivity from the higher work values
Low hole tolerance thanks to the optimum balance of forces
Excellent surface finish from the WIPER action at the hole diameter
Cost reductions:
– 4 cutting edges per insert
– higher cutting parameters – saving additional follow-up operations
High process reliability from positive
locking of the insert
|
|
Indexable Drilling
Kennametal offers the most complete range of indexable drills, ranging from the DFR 12,7mm (.500") to the HTS deep hole drilling system of 270mm (10.63"). Coupled with Kennametal grade technology, the indexable drills offer security, durability, and aggressive cutting speeds.
Drill Fix DFR
High feed rates, better stability, and process safety.
Drill Fix DFT
Most complete range of indexable drills in the metalworking industry.
HTS Deep Hole Drilling System
Flexible indexable deep hole drilling system.
|
|
- Economical, 4 cutting edges per insert.
- Low drilling noise and tough body.
- New MIRACLE Coated X/P15TF (US breaker) for stable machining and a wider application area.
JUST FIT SLEEVE
Allows the drill diameter to be increased in increments of 0.1mm up to a maximum of 0.5mm.
|
|
Carbide drill bit, SDS.
5900V SDS-shank solid carbide tip MONSTER - Precision setting special
Lg 116mm - 166mm - 216mm - 266mm
5300V SDS-shank high performance LITOR - Reinforced plate fixation
Lg 110mm - 160mm - 210mm - 260mm - 450mm - 600mm
5500V SDS+ BULL masonry drill bit - Reinforced plate fixation, centering point
Lg 110mm - 160mm - 210mm - 260mm - 450mm - 600mm
5700V SDS+ Universal drill bit - Reinforced plate fixation,
Lg 110mm - 160mm - 210mm - 260mm - 450mm - 600mm - 1000mm
|
|
|
The Interloc drive system was designed for extended reach machining applications, which can consist of heavy roughing or deep pocket finishing. The Interloc System is designed so that a modular tool can equal the strength of a solid shank one. The Interloc system has a large variety of straight, taper reach, CAT 40, CAT 50, and integral shanks with interchangeable cutter heads. This versatility will allow you to machine deep cavities with Ball nose, Back draft, Flat endmills, CDW style Cermet or Carbide inserts. Fast efficient roughing from feeds of 50 IPM to over 100 IPM on even low horsepower machines.
|
|
Heavy metal boring bars
Bars range from 250-750
Minimum bore as low as .275
Over all lengths up to long 12’’
Positive triangle
Positive 7° trigon
|
|
3030V HSS MORSE TAPER-SHANK GROUND DRILL BIT
3031V COBALT 5% HSS MORSE TAPER-SHANK DRILL BIT
3055V Adapter sleeve to reduce for taper-shank drill bit
3056V Adaptater sleeve to increase
|
|
Polycristalline diamond tools for optimal tool life and highly precise holes.
Drilling tools in solid carbide, diamond and cermets
With HAM´s standard tools it is possible to machine hardened steel up to 63 HRC without problems and economically. We have also developed a special line of tools designed for use of minimum lubrication or dry machining.
HAM is permanently trying to improve the quality of the carbides in close cooperation with its suppliers. Our engineers test and retest the coatings of the tools in our technology centre in order to achieve the best suitable solution.
To be recognized as a system supplier that serves complete solutions, HAM has enlarged its product range with brazed and indexable tools. These products are offered as standards or as specials tools according to customer drawing.
|
|
PCD equipped tools prove their efficiency especially for high-speed cutting applications. This cutting material usually demands high rpm, which means that the machining times are reduced substantially. Compared to the common solid carbide drilling tools very high tool lives are achieved due to the hardness of PCD tools.
Further advantages are excellent surface qualities, high cutting volume, and high thermal conductivity.
|
|
Landis Reamer Program
Landis Reamers for reaming, chamfering, and facing come in four basic styles - solid, detachable blade, insert blade and composite. The style supplied will depend upon the operation to be performed and the type of Landis die head in which it will be used. They can be identified by a symbol number stamped or etched on one of the flutes of the solid and composite reamers and on each one of the blades of detachable and insert blade-type reamers.
|
|
Designed to finish holes to H7 tolerance, Dormer manufacture a range of HSS and HSS-E reamers:
- Hand Reamers
- Adjustable Hand Reamers
- Hand Reamers Quickly Adjustable
- Hand Taper Reamers
- Hand Taper Pin Reamers
- Machine Reamers
- NC Reamers for High Precision Chucks
- NC Centesimal Reamers for High Precision Chucks
- Machine Centesimal Reamers
- Machine Reamers Left Hand Helix 45°
- Machine Reamers for Conical Pint Left Hand Helix 45°
- Bridge Reamers
- Shell Reamers
|
|
Bore sizes up to 8.00”
Up to .200” stock removal
Size control within .001”
Life capability to 100,00 bore
Whatever your requirement, every tool is engineered and manufactured specially for your application
|
|
Our comprehensive reamer range has been designed to not only meet requirements of dimensional accuracy and surface finish for precision hole machining, but also to deliver high productivity.
Including fixed, expandable and modular mandrel reamers, the range covers hole diameters from 5.8mm to 200.6mm and incorporate integral coolant ports in three configurations to provide optimum coolant flow for both through and blind holes.
All reamers in the range use brazed carbide cutting edges, incorporating various coatings to suit specific work piece materials and maintain optimum performance, accuracy and finish. Also, six different 'lead in' geometries can be specified, dependent on whether an integral expanding reamer or modular cutting ring type is required.
|
|
Hand reamers / Machine reamers
- Left hand spiral
- Straight shank and square
- irregular division
|
|
High-precision reaming tools and reamers
for finishing and fine internal machiningAs a brand of the KOMET GROUP® , DIHART® is convincing for its perfect reaming technology to new dimensions.
For the economic fine machining of bores, the comprehensive tool programme of standardised one-way heads, from Monomax® monoblock tools, PCD reamers and tailor-made multiblade stepped reamers and on to customer-specific special tools, guarantees accurate, economic and reliable machining.
Innovative solutions for fine bore machining:
Reamax® TS - Modular reaming system
Reaming with indexable insert technology
DIHART® compensating holder DAH for µ-accurate concentricity
|
|
|
|
|
|
Tools with "built-in know-how" reduce costs. This also applies to our powerful reamers, which quickly pay for themselves in daily use in the production department.
Standard reamer with parallel shank
Standard reamers with parallel shank and guide pads (solid carbide + cermet) for all common dimensions in H6 tolerance, for through-hole and blind-hole boring with a defined selection of cutting plate geometries for all common workpiece materials.
Special solutions:
Specially manufactured reaming tools with indexable inserts and guide pads are possible for a wide variety of machining processes, such as boring of camshaft and crankshaft bearings up to valve guide machining.
Depending on requirements the cutting tool material, geometries, pad materials, different step profiles and tool holders, such as compensating adapters, can be integrated into the tool concept to fulfil maximum roundness, cylindricity and quality requirements.
- Reamers with step profiles
Stepped reamers enable a high degree of accuracy with concentricity requirements in the tolerance range IT 5 - IT7
- Reamer with compensating adapter
In the event of critical tool projections or machine-related inaccuracies a tool must be equipped with a compensation adapter, as illustrated on the left, which is set radially and axially on the machine. Doing this will ensure an optimal production process.
|
|
DIXI Polytool has a complete range of standard indexable inserts "ARTDECO" for swiss turning applications as well as brazed turning tools.
|
|
Reaming
Kennametal capabilities are not finished in just drilling a hole. When high quality holes are needed, the KM multi-cut high performance Reaming program is the solution. All of the Reamers will be ground after ordering specific to the application regarding diameter and cutting material. There are three different systems available: RMA (Reamer Monobloc Adjustable), RCH (Reamer Cutting Head) and RMS (Reamer Monobloc Solid Carbide)
RCH Reaming System
Flexible reaming system
RMA Reaming System
High performance reaming system.
RMS Reaming System
Unique cutting geometry and coating.
|
|
Reamers
- High performance Reamers
Solid Carbide
Carbide-tipped
- Expansion Reamers
- Hand- and Machine Reamers
HSS / HSS-E
- Quick Adjustable Hand Reamers
- Shell Reamers
- Taper Bridge Reamers
- Taper Pin Reamers, taper 1:50
- High-Helix Taper Pin Reamers, taper 1:50
|
|
These high quality, easy-to-use, reamers are perfect for high performance machining and large batch production.
Optimised cutting grades and geometries offer high productivity in all types of materials. Diameter range 4-60 mm (inches: .1574-2.362).
Read more about our reaming products below:
BIFIX
Bifix is a high precision, indexable blade reamer suitable for all material groups.
PRECIFIX
Precifix is a high precision indexable blade reamer capable of IT6 tolerance. The diameter range covers 12-60 mm, and the unique clamping system design ensures stable blade clamping.
PRECIMASTER
Precimaster is a smart design, exchangeable head reamer. It's effective, accurate, modular and adjustment free.
|
|
in High Speed Steel and Carbide
NC machine chucking reamers
Machine and machine chucking reamers
Taper pin reamers
Hand reamers
|
|
MAPAL offers a very extensive programme for rough-boring applications: the MAPAL WWS boring tools featuring PCD inserts, the special MAPAL tools with ISO inserts and the newly developed adjusting system guarantee best boring results.
|
|
Solid Carbide Drills
2 Flute - 118° Four Facet Point
3 Flute - 130° High Performance Point
Cutting Edge Tolerance/Shank Tolerance +.000 - .0002
|
|
|
|
Drill bits, Reamers
