|
|
C019V3005 19Pc HSS roll-Forged drill bit kit - metal case (ECO box)
C019V3005-2 19Pc HSS roll-Forged drill bit kit - metal case (PRO box)
C025V3075 25Pc Tecn'x Cobalt 5% drill bit kit - metal case
C025V3085 25Pc Tecn'x HSS M2 drill bit kit - metal case
|
|
|
SGS Solid Carbide Drills feature special geometry and other enhancements that provide greater hole dimensional accuracy at higher production rates. Available with SGS Ti-NAMITE Tool Coatings, including Ti-NAMITE (TiN), Ti-NAMITE-A (AlTiN), and Ti-NAMITE-C (TiCN), to dramatically increase tool life.
|
|
CHAMDRILLJET, the new evolution of CHAMDRILL, has all of the familiar CHAMDRILL advantages and in addition two coolant holes extending all of the way to the cutting edges.
The new CHAMDRILLJET also features new drill head geometries.
All of these new developments are a result of ISCAR's advanced manufacturing technology.
Drill Heads
CHAMDRILLJET features four different, standard drill head geometries designed specifically for optimal performance and
maximum reliability when used on various materials.
- IDP - For use on carbon and alloy steel (ISO P).
The drill head has a honed cutting edge.
- IDM - For use on stainless steel and high temperature
alloys (ISO M).
The drill head features a T-land on the cutting edge.
- IDK - For use on cast iron (ISO K). The drill head is designed with
a honed cutting edge and two peripheral chamfers.
- IDN - For use on aluminum (ISO N). The drill head is manufactured with a sharp cutting edge and polished flutes.
|
|
PRESS-FIT BUSHINGS
RENEWABLE BUSHINGS
LINER BUSHINGS
LOCKSCREWS & CLAMPS
CASTABLE BUSHINGS
CHIP-BREAKER BUSHINGS
DIRECTED-COOLANT BUSHINGS
OIL-GROOVE BUSHINGS
GUN-DRILL BUSHINGS
TEMPLATE BUSHINGS
Threaded Template Bushings
CIRCUIT-BOARD DRILL BUSHINGS
AIR-FEED-DRILL BUSHINGS
|
|
The COMBI tool combines drilling with back chamfering into a single tool. Save time, money and space on your machining center with a combination tool.
Combine operations by adding patented chamfering systems to existing operations.
Reduce tool changes and cycle times to boost production.
Custom made tooling for boring, drilling, and countersinking with deburring.
From 9.5mm to 35mm.
|
|
Centerdrills
Countersinks
Combined Drill & Countersink
Counter Bores
Hey Drills
Spotting Drills
Chamfer Drills
It provides a wide array of center drills and custom cutting tools.
|
|
SHARK-Cut®...the high-performance drilling and turning system –
effective and productive!
• CNC polished inserts ( AWI / WI ), available optionally in coated or non-coated finish
• extremely efficient boring tools
• suitable for turning and boring
• four machining processes possible with one tool
• maximum precision and process dependability
• all holders complete with an internal coolant feed
• drilling depths up to 3xD
|
|
Sandvik Coromant's drilling programme offers a wide range of high performance drilling products.
Regardless of the hole style - we can offer you the right tool for the best productivity in a wide diameter range. Both solid carbide drills and indexable insert drills are available.
CoroDrill® 880
When Sandvik Coromant recently introduced CoroDrill 880 it was perceived as a giant leap in short hole drilling. The Step Technology made the first indexable insert drill with perfect cutting force balance wich will substantially improve production economy in holemaking. Up to 100% higher feed rate and closer tolerances are achievable.
CoroDrill® 800
Sandvik Coromant also offer drills for deep holes up to 150 times the diameter in a wide diameter range in the Ejector and STS systems. Double your productivity with the new unique CoroDrill 800.
With Tailor Made and Special drills included the programme offers unlimited possibilities.
|
|
GEN3SYS®
High Penetration Drilling System
Features and Benefits
The unique geometry of the GEN3SYS® Drilling System enables excellent chip control while drilling
The GEN3SYS® High Penetration Drilling System out penetrates by up to 20% faster than other competitive drilling products.
The GEN3SYS® High Penetration Drilling System has a highly precise locating pad for absolute repeatability and reductions in TIR.
The proprietary AM200® coating increases tool life up to 25% above competitors premium coatings.
GEN3SYS® Replaceable Tip Drilling System is backed by a highly experienced technical staff
The unique design of the GEN3SYS® High Penetration Drilling System increases hole quality, surface finish, and true position when compared to other competitive products
The helical margin design of the GEN3SYS® enables maximum durability and stability when cutting forces are applied
|
|
BENEFITS:
- 2xØ and 3xØ for all sizes
- Large, reinforced helical flutes.
- Through tool coolant
- KAB6 connection for drilling all diameters up to 2 1/2" on 40 or 50 taper machining centers.
- Standard WCMX carbide inserts
- Coolant inducers and adjustable holders standard.
|
|
|
These compacts are also used to prevent rubbing wear on steel surfaces and where it is more economical to drill less precision holes.
|
|
Sandvik Coromant's drilling programme offers a wide range of high performance drilling products.
Regardless of the hole style - we can offer you the right tool for the best productivity in a wide diameter range. Both solid carbide drills and indexable insert drills are available.
Sandvik Coromant also offer drills for deep holes up to 150 times the diameter in a wide diameter range in the Ejector and STS systems. Double your productivity with the new unique CoroDrill 800.
With Tailor Made and Special drills included the programme offers unlimited possibilities.
|
|
The multi-function system enables one single tool to conduct turning, drilling and boring operations.
Features
# Minimized tool positions.
# Less programming effort.
# Shorter set-up times and reduced pre-setting times.
# Reduced stock-keeping costs.
# Drilling range: 8 - 20
|
|
Take productivity to new levels. Walter and Walter Titex drilling solutions represent a wealth of inovation that reduce your costs, increase your productivity and bost your competitiveness.
Walter tools for machining, drilling, precision boring and grinding enjoy an excellent reputation among drilling specialists.
They are extremely accurate, powerful and very economical for machining steel and cast iron materials and for drilling into stainless and difficult-to-cut materials.
The smaller and deeper the hole, the bigger the challenge. Whether you need more universally applicable drilling solutions for varied applications or a highly specific and unique use, tools from Walter and Walter Titex are exact, efficient and economical.
|
|
Holeshot® OTM™ Tools
Maximize your productivity and lower your cost per cut with OTM™ quality and variety.
- Grades
- Holeshot® Drills
- Coremaster® Coredrills
- WCMX & WCGT Inserts
- Stinger™ Drills
- Counterbores
- Countersinks
- TCMT Inserts
- End Mills
- Chamfer Mills
- Face Mills
- XPMT Inserts
- Aluminum Cutting Mills
- APET Inserts
|
|
Quad-Drill line now includes 9 standard sizes, all larger than 2 inches
Up to 30% more productivity than the drills they replaced
All sizes have 4 insert stations
Currently offered in 2:1 length-to-diameter ratios
3:1 lengths coming soon
|
|
|
The highly polished open flute not only allows for easier chip formation and evacuation, but also provides for a sharper cutting edge that delivers a better edge finish on a variety of materials. Our premium micro grain carbide allows for superb wear resistance and tool strength. Special point geometry contributes to improved bottom finish and plunging capabilities. Tools are available in upcut and downcut versions from 1/16" through 3/8" diameters.
|
|
|
|
|
|
feedMAX - Solid Carbide Drills
Highest productivity with Seco solid carbide drill. Due to the new superior quality drill Seco can help you improve your productivity by as much as 100%. Saving money and time. feedMAX offering drills in diameter range 3-20 mm. The self-centring geometry gives quality holes without pre- or finishing operations necessary. The low friction TiAlN coating secures good performance in a wide range of materials as well as an exceptional tool life. The high productivity together with the long tool life gives excellent total machining economy when using feedMAX solid Carbide drill.
Brazed Carbide Tipped Drills
Brazed carbide tipped drills in diameters 9,85-32,10 mm for drilling quality holes without any finishing operations. Self centring geometry with a TiN coated P25 micro grain carbide gives good chip control and tool life in most workpiece materials.
Coolant through the drills for safe chip evacuation.
Seco CrownLoc
Drill precision holes at low cost in the hole diameter range from 12 to 25,99 mm with Seco CrownLoc. The exchangable crowns cut all your regrinding costs. With every change of crown, a new one guarantees long and predictable tool life. Exchangable crowns also allow for high cutting speeds reducing machining cost. Optimised geometries for different workpiece materials; steel, stainless steel and cast iron, complete the advantages with the CrownLoc system.
Perfomax Indexable Drills
The Perfomax range of indexable drills, in diameters 15-80 mm, is based on long experience and the very latest technological advances in drilling. Strong square inserts for good machining economy, a rigid drill body and good chip flow enable the drills to handle high metal removal rates. The drills can be used both in rotating and non-rotating applications. A unique chip path configuration reduces noise and vibration. Drilling depths from 2 x D to 5 x D.
|
|
The all-surface tool for plunging, drilling, grooving and more.
- Multi-Function Cutter: Center cutting capability allows drilling of holes as well as other operations such as channeling, contouring, shouldering and ramping.
- 2 Identical Inserts - 2 Effective Teeth: Cutter designed with two identical trapezoidal inserts, allowing for two effective cutting edges when plunging and endmilling.
- Great Strength: Insert geometry designed for applications in high strength tool steels. Our VP5020 grade (PVD coated micrograin carbide) is highly resistant to wear and thermal shock.
- No Interference with the Part Being Machined: The cutting diameters of the cutters are intentionally made larger than the shank diameters.
- Greater Rigidity with Large Overhangs: Plunging, a milling operation along the Z-axis only, minimizes the flexing of the cutters and allows a greater overhang than can be realized with conventional milling in the X and Y axis.
|
|
in High Speed Steel and Carbide
Twist drills
Ratio drills
Micro-precision drills
Oil feed drills
Subland drills
Centre drills
Core drills
Gun drills
Drilling systems with interchangeable inserts
|
|
Developed in cooperation with the University of Sheffield Advanced Manufacturing Research Centre with Boeing in the UK, Dormer's drills for composite materials feature a unique, patented point design that reduces thrust and torque requirements. This improves cutting efficiency and significantly reduces splintering and delamination at exit.
There is an internal coolant option for wet machining and a diamond coated option to further enhance tool life. The range is available from 2.38mm to 20mm diameter and with overall lengths up to 310mm as a ‘special order’, allowing the end user to specify their own requirements, including sizes, applications and cutting conditions.
|
|
"SLICK" Twist Drills for composite materials and Titanium
HTT patented “Slick” Drills are micrograin solid carbide twist drills designed for Drilling – Reaming – Countersinking in one operation (“One Up”) composite materials (AL/AL - AL/Ti - CFRP/AL - CFRP/Ti - Ti/CFRP - CFRP - Ti/Inconel). “One Up” operations offer the following benefits:
Reduction of the quantity of tools and production phases
Costs reduction
Operation Time reduction
Improvement of surface finish quality
“Slick” Twist Drills are of three fundamental types:
- For CNC machines
- For semi automatic machines (PV Tools, pneumatic tools with constant feed per revolution)
- Hand operated twist drills (with a pre-hole that enables you to obtain a finished ½” bore in one operation instead of using 8 different drills and bore processes)
|
|
|
|
|
|
- Maximizes cost savings by eliminating step drilling for deep holes
- Reduces cycle times up to 15 times over gun drilling
- Reverse web taper for maximum chip removal
- Ultra-smooth surface treatment aids in chip removal
- Coolant-thru
- TiAlN coated for long tool life
The FTO-GDXL is capable of non-step drilling up to 30 times diameter! By eliminating step drilling, cycle times are reduced up to 15 times over gun drilling.
FTO-GDXL Drills are coolant-thru and feature a reverse web taper, ultra-smooth surface treatment, and OSG’s special TiAlN coating, all contributing to efficient chip removal in deep holes. The new drill is available in sizes ranging from 2.5mm (0.098”) to 20mm (0.787”) in diameter.
These drills are capable of working in a wide variety of work materials. In trial applications, cost savings over traditional gun drills are most often measured in thousands or tens of thousands of EURO.
To request more information on this product, please visit our Literature Request Page
|
|
|
Deep holes are defined by a high ratio between hole depth and hole diameter. Deep hole drilling is the preffered method for drilling hole depths of more than 10 x the diameter up to 150 x diameter. Sandvik Coromant are a world leading manufacturer of deep hole drilling systems.
|
|
At AMEC we have taken our extensive and in-depth knowledge of drilling and production to create a complete deep hole drilling system, which includes three outstanding product ranges to meet the diverse and often extreme demands of deep hole drilling. This specialised catalogue covers all of the products in our deep hole drilling programme and provides detailed information on our XL and 3XL drills together with the innovative BT-A Drill, which sets new standards in accuracy, tool life and performance in this application sector.
Whatever your deep hole drilling requirements, AMEC has the solution.
|
|
The new generation of the extra large solid carbide drills up to 40 x D.
Drilling tools in solid carbide, diamond and cermets
With HAM´s standard tools it is possible to machine hardened steel up to 63 HRC without problems and economically. We have also developed a special line of tools designed for use of minimum lubrication or dry machining.
HAM is permanently trying to improve the quality of the carbides in close cooperation with its suppliers. Our engineers test and retest the coatings of the tools in our technology centre in order to achieve the best suitable solution.
To be recognized as a system supplier that serves complete solutions, HAM has enlarged its product range with brazed and indexable tools. These products are offered as standards or as specials tools according to customer drawing.
|
|
The CoroDrill 805 makes it possible to drill deep holes without moving the workpiece to a dedicated deep hole drilling machine i.e. all operations can be completed in one set-up.
Deep holes can be performed with high productivity and reliability achieving a hole quality comparable with traditional deep hole drilling. Another advantage is that no extra pump capacity is required.
CoroDrill 805 carries the same standard inserts as CoroDrill 800.
Deep holes are defined by a high ratio between hole depth and hole diameter. Deep hole drilling is the preffered method for drilling hole depths of more than 10 x the diameter up to 150 x diameter. Sandvik Coromant are a world leading manufacturer of deep hole drilling systems.
|
|
|
|
Drill bits, Reamers
