|
|
| Products 91 to 120 of 237 |
|
|
|
|
TBT single-lip drills are manufactured for any drilling diameter (1/1000 mm steps) from 0.9 mm to well over 50 mm and in overall lengths which can even exceed 2500.
Depending on the material to be drilled, the machine utilised by the customer and the particular drilling situation, we manufacture the optimum tool for your applications.
Whether in standard version or for widening already existing bores, as step tool for making precision stepped bores with minimised centre offset or as special tool for special boring, whether without coating or in a version with coating, and for the most exacting requirements, also with diamond-tipped tool cutting edge.
TBT advises you and implements your head and shaft requirements for the tools efficiently and quickly with the latest design and production methods.
The tool head and shaft are brazed with the clamping sleeve to fit your machine.
TBT always keeps several hundred different clamping sleeves in stock. Just ask for our complete offer of accessories for deep hole drilling.
|
|
Drills are basic manufacturing tool whose speed, precision, and safety have an important bearing on the quality and efficiency of production operations.
OSG is gaining an increasingly large share of the drill market through the development of drills that ensure superior productivity.
Used in combination with OSG's taps and end mills as a total tooling solution, OSG drills provice manufacuturers with various business advantages, including cost savings.
Try with our:
- EX-SUS-GDS/GDR drills for stainless steels (No pecks anymore!)
- VP series for hardend steels with high speed drilling
- SH-DRL for quenched and tempered steels (up to 70 HRC!)
- etc....To request more information, please visit our Literature Request Page
|
|
MDS and KDS Drills meet the industry demand for effective and efficient driling of steels, cast irons and exotic materials. Available in large to very small diameters, they offer excellent productivity and about 10 times the tool life of HSS drills.
• Increased strength - A thicker web and narrower flute increase torsional rigidity throughout the drill body, reducing oversizing and improving surface finish.
• Lower cutting forces - Positive radial rake angles significantly reduce cutting force, torque and power requirements.
• Better chip removal - The cutting edge geometry, formed by the concaved cutting edge and flute wall produces short, curled chips which are easily evacuted.
• Advanced tool materials - A titanium substrate increases tool strength, while PVD coating improves wear, adhesion-resistance and cutting forces.
|
|
|
The MDSS "Long Multi Drill" is special designed for deep hole drilling e.g. for crankshaft machining. Cutting temperature, chip removement, strength and geometry of the drill and so called minimum quantity lubrication (MQL) have big influence to cutting process. Especially this MQL enables this carbide twisted drill to make deep hole drilling, whose L/D is more than 15, as short chips are generated by MQL. Our Long Multi Drill has a ZX coated chip generating area and a new designed chip removal area.
|
|
Deep Drilling
Operation with 1700 cycles granted.
These HTT gun drills are specifically designed for sferoidal cast iron and can be supplied with or without coolant holes. Surface coatings: PVD or CVD.
Range of diameters: 6-20 mm
|
|
|
|
|
|
Highest efficiency for:
- economic efficiency
- operating time
- service life
- speed
- surface quality
- precision
- machine utilisation
and the special advantage:
- no chips produced
Axial rolling heads
Types F, FU, F-RN, K
- Unlimited profile length rollable, workpiece stationary or rotating Machining range 1.4 - 230 mm Ø.
- Arbeitsbereich 1,4 - 230 mm Ø.
- For plain turning slide, turret, spindle nose and tailstock units.
- Can be used on conventional lathes, automatic single and multispindle and also turret lathes
Radial rolling heads
Type C
- Profile length of up to 39 mm.
- Also rollable are threads behind a collar, with a very short thread runout plus extremely short threads.
- Machining range 5 - 36 mm Ø.
- >For plain turning slide, turret and cross slide rest units..
- Can be used on ordinary lathes, automatic single and multispindle and also turret lathes
Tangential rolling heads
- Profile length of up to 39 mm.
- Also rollable are threads behind a collar, with a very short thread runout plus extremely short threads.
- Machining range 1.6 - 80 mm Ø.
- For cross slide rest and turret units.
- Can be used on automatic single and multispindle and also turret lathes.
Rolltime for a thread M10 x 1,5; 20 mm lg 0,56s.
|
|
|
To maintain our position as a leader in the industry, we continue application of advanced techniques and innovations in technology to expand and improve cutting tool efficiencies. We are dedicated to producing the finest precision high-speed steel cutting tools available.
|
|
Fine adjustment head:
Flexibility in fine boring
KOMET MicroKom® and KomTronic®
The technically sophisticated product series KOMET MicroKom® and KomTronic® stand out for their particular performance capability and flexibility. They therefore come up to the highest requirements in terms of precision, concentricity and replacement accuracy.
The modularity, a wide range of the latest cutting materials and high-performance coatings complete the series for all requirements in fine boring machining.
|
|
Precision boring systems with Bluetooth technology
Modern wireless networking is one of the benefits with which the new MicroKom® BluFlex™ fine adjustment head is equipped. Bluetooth is a technology developed for wirelessly networking devices over short distances. This technology has become standard for small mobile devices.
The introduction of Bluetooth in the MicroKom® BluFlex™ tool system means that the display has been disconnected from the tool head, thereby making it easier and more convenient to read off the data. When adjusting the tool system, the user can move the display to suit the conditions on site, so that it is in his field of view. A specially designed adjustment key with integral Bluetooth interface is part of the system.
With integral part balancing, the MicroKom® BluFlex™ can reach a rotational speed of up to 16,000 rpm.
The modular ABS® interface makes adjustment easier on both the spindle side and tool side.
|
|
Fine Boring System
Kennametal offers Modbore and Romicron® - two world-class boring systems for your fine to rough boring requirements. Perform rough boring and precision boring operations with Modbore. Meet ultra precision requirements with Romicron®.
Romicron
For your precision boring operations.
Modbore
Twin cutting heads allow increased feed rates.
|
|
Gun drills with 1 cutting lip
EB 80 and EB 100
Gun drills with 2 cutting lips
ZB 80
Gun drills with indexable inserts
EB 800
|
|
|
Solid Carbide Drills in Jobber Length...Fast Sprial...Three Flute...Straight Flute...Flat Drills...and Conbide Drill and Countersinks. Fractional and Metric Sizes
|
|
The use of the highly wear and oxidation resistant Miracle Coating achieves long tool life at extreme feed rates or during high temperature conditions experienced during deep drilling operations.
This range of drills achieves state of the art performance and hole precision even under the toughest cutting conditions.
Ask our experts more. MPS drills on demonstration every day at EMO, Mitsubishi Materials, Hall 5, Stand D20.
Available from Ø3.0 – Ø20 l/d x 3, and up to l/d 30 for diameters up to 10mm.
|
|
|
|
|
|
CoroPlex™ MT
By introducing the multifunctional CoroPlex™ MT Sandvik Coromant establishes a new standard that is of outmost user benefit for operations performed with the latest of machine tool technologies.
CoroPlex MT is a combination of two winning concepts in one – CoroMill 390 and CoroTurn 107. It is either applied rotating as an effective tool for milling applications – or indexed in a number of optional positions for stationary turning using two different CoroTurn 107 inserts.
Sandvik Coromant´s multifunctional tool CoroPlex MT is designed for practically unrestricted use of all the insert positions possible without support of any extra software. Although CoroPlex MT is dedicated for Multi-Task machining it is easy to use the tool in somewhat older machines working with the software capacity limited to conventional standard cycles.
CoroPlex™ MT is an innovative multifunctional tool for finishing the workpieces in a single set-up with reduced downtime on the machine. It also completes together with CoroPlex TT twin tools, with two inserts in one holder giving the possibility to change operations momentarily, and CoroPlex SL mini-turret, with four turning tools in one, the dedicated tooling Sandvik Coromant provides Multi-Task machining.
|
|
|
|
|
|
A boring tool is usually a modular tool, consisting of a basic holder, adapter and a cutting unit in the form of a cartridge, slide or fine boring unit. A fine boring head holds a boring bar or cartridge. A reamer has a tool shank and a close pitch head with brazed blades. The tools, except the reamer, are radially adjustable within a specific diameter range.
Sandvik Coromant now introduces CoroBore 820, a unique addition to its boring tool programme.
CoroBore 820 is a new solution for high productive boring preferably in roughing operations. The boring range is 35 - 260 mm and the boring depth is up to 4 x diameter. It is designed for internal coolant supply.
Three cutting edges allow a higher penetration rate with maintained tool life. A comprehensive programme of tool bodies, slides, shims and cutting inserts allow CoroBore 820 to be configured to suit the widest possible range of applications.
CoroBore 820 in combination with Duobore makes a highly productive team for rough boring from Sandvik Coromant.
|
|
BoreSTAR out-performs any other kit when it comes to range, rigidity, accuracy and repeatability.
The BoreSTART kit is fast and simple to use (no spacers or complicated set-ups) but is extremely rigid and accurate. It is dial adjustable in increments of 0.0001". Range is from .314" to 6.69" (8mm to 170mm)
|
|
Carbide,industrial quality
GFB Bits exceed DIN standard
NOVUMTEC is specifically making high quality wide range bits and accessories for all kind of ScrewDrivers, Power tools, Machines, Tools.
"GFB" bits at Taiwan price, meet DIN Standard, match any screw heads perfectly is long life bits.
|
|
Carbide Tipped Hole Saws
Specifically designed for sawing holes in abrasive materials such as fiberglass, particleboard, asbestos board, and formica.
- Tungsten carbide tooth tips offer the highest wear resistance possible and longer life cutting abrasive materials
- Ground and set teeth to help cut materials that bi-metal saws will not cut
- 3 teeth per inch creates wider gullet for better chip clearance and faster cutting.
|
|
Gamflex Bi-Metal Holesaws Metal Cutting
Made from Bi-metal high speed steel, these holesaws are blue and have exceptional strength and high wear resistance. They cut a variety of materials including steels, cast iron, non ferrous materials, plastic and wood.
Single Tool Holecutters Wood Cutting
Beige in colour and are specifically designed for cutting wood and cement sheet. Wood Holecutters are tungsten carbide tipped and cut 5 times faster in wood than conventional high speed steel bi-metal holesaws.
High Speed Steel Holecutters Sheet Metal Cutting
Produce accurate, round clean holes in steel and alloy sheets. Holecutters are suitable for electrical installation work.
Diamond Grit Holesaws Tile/Fibro Cement Cutting
Rapidly cut holes in fiberglass, hard plastics, fibro cement and ceramic tiles.
Tungsten Carbide Tipped Holecutters Stainless Steel Cutting
Cuts to a depth of 4mm in steels, fiberglass, chipboard, glass reinforced plastics and other abrasive materials.
|
|
3115V DM05 HSS ground hole saw
3116V Hole saw shank
3117V Hole saw pilot drill bit
3118V Tungsten carbide hole saw for stainless steel
3105V Bi-metal hole saw (38mm depth of cut)
3106V Bi-metal HSS hole saw shanks
3107V Pilot drill bit (diameter 6.35mm)
BOX : with shank and pilote drill bit
5-pc artisan's HSS bi-metal hole saw kit
6-pc maintenance HSS bi-metal hole saw kit
6-pc electrician's HSS bi-metal hole saw kit
9-pc installation HSS bi-metal hole saw kit
|
|
AMEC HSS Super Cobalt
PVD Coated Production Drills
Features and Benefits
- HSS Super Cobalt Substrate
Allows longer tool life and increased heat resistance over HSS drills
- Preferred Point for Stainless Steels
135° split point
Self centering point
- Heavy Duty Construction
For increased tool strength
Reduces thrust for ease of penetration
- For Use in Most Materials
Stainless Steels, Tool Steels, Alloyed Steels, Titanium, Cast Irons and Carbon Steels, Free Machining Steels, Steels etc.
- Choice of Coatings
Balinit® Helica coating for greater abrasion resistance, extra sheer strength, lower adhesion tendency
AM200® for increased tool life and improved drilling performance
- Stocks
Stocked in Helica coating and uncoated condition from 1mm to 13mm diameter
Stocked in Stub, Standard, Long Length and Extra Long Length
- HSS Cobalt drills manufactured to DIN standards
|
|
|
|
|
|
Walter Titex UFL – always the first choice for drilling specialists
The special flute profile, the 40º helix angle and the form U point grind guarantee good chip clearance, considerable tool rigidity, excellent chip evacuation properties and a controlled chip breaking.
Unique AlCrN-based power coating
Perfect chip removal thanks to large chip clearance
Can be used universally
Attractive price/performance ratio
High process reliability
Varied application possibilities with regard to materials and application (e.g. MML).
Ensures free machine capacity
VA INOX – HSS-E-drill
Austenitic stainless steel is extremely difficult to machine due to its very high strain, great toughness, unfavourable chip formation and poor heat conduction. A completely new type of HSS-E drill has been developed as a reliable solution – the “VA INOX”.
TINAL FUTURA TOP coating for increased wear resistance, optimum chip transport and prevention of material pick-up.
Enormous increase in feed rates
Economical production of small and medium-sized batches as are often required for stainless steel components
Extremely high productivity
|
|
Drills HSS-E
- Twist Drills HSS / HSS-E
- Taper Pin Twist Drills,
Subland Twist Drills,
Core Drills / Shell Drills
- Centre Drills HSS / HSS-E
HSS / HSS-E
Solid Carbide
|
|
A wide range of metal drill bits:
3000V HSS ground
3005V PRO HSS roll forged
3085V Tecn'x HSS ground splint point
300XV HSS ground splint point
3075V Tecn'x cobalt 5% ground
3060V Tecn'x cobalt 8% ground
3098V cut & gold ground
3001V Tecn'x titanium ground
3065V cobalt 5% tiain HSS ground
3008V "coupe alu "M2 HSS metal
3020V Tecn'x M2 stub-lenght ground
3120V double-ended HSS ground
3010V tecn'x M2 long length ground
3016-17-18V tecn'x M2 extra long-length ground
3030V HSS morse taper-shank ground
3031V cobalt 5% HSS morse taper-shank
3777V solid carbide
3009V carbide ground
3011V 90° step
3012V 120° step
3039V M2 HSS milling
3101V cobalt 5% ground spot weld
3071V M2 HSS ground spot weld
3050V 60° HSS center
Metal box : 7-10-12-19-25-32-81 drills bits
|
|
|
|
|
|
Revolution Drill™
The AMEC Indexable Drill Range
The AMEC range of adjustable indexable carbide drills provides the ultimate in versatility as they can be pre-set to cut any diameter hole within their range of 47.75mm to 142.75mm.
The AMEC Revolution™ drilling system uses 'over-centre' cutting to drill from solid without the need for a pilot hole.
Available in a range of shank styles and capable of drilling to depth up to 5 times diameter. The AMEC Indexable range is a powerful and versatile drilling solution that can delivery high productivity and a low cost per hole in a diversity of applications and industry sectors.
Features and Benefits
Drills from Solid, no pilot required
Revolutionary design allows adjustability upto 5.1mm on diameter
Drill Depths up to 4.5 times diameter
Removable cartridges for easy replacement
Insert design allows for excellent chip control and aggressive penetration rates
Less tool inventory needed for range of diameters
The proprietary AM200® coating increases tool life above competitors premium coatings.
|
|
The new Posidrill Plus™ system offers excellent performance in short-hole drilling. The body and insert combination offer an unbeatable combination for 2x (all drills above 2.500” Ø) or 3x diameter short-hole drilling. The Posidrill Plus™ replaces the Posidrill II™.
- A unique pocket design preventing slugs as the drill
exits the component. This allows stacked plates and
welded assemblies to be drilled.
- Multiple inserts in each flute for larger drills break the
cut into smaller sections. This reduces the power
consumption, creates more manageable chips and
allows for excellent chip evacuation.
- Use in static and rotating applications.
- Able to bore up to 10% hole diameter
- Excellent performance in stainless steels
|
|
- Metric and inch diameters offer a wider diameter range.
- Special surface treatment of drill-body design improves rigidity and resistance to erosion due to chip extraction, and provides longer tool life.
- Coated drill body prevents corrosion and extends tool life.
- Helical flute is designed for excellent chip extraction, especially in deep drilling. Provides better hole finish and extends tool life.
- Two flow-through coolant holes provide stability and enhance chip removal.
|
|
|
|
|
|
General description:
The Wave Drill Series indexable drill brings together the wear resistance of carbide inserts and the toughness of a steel drill body. This combination lets the customer use higher feed rates to increase productivity.
The WDS drill has two unique styles of carbide insert geometries for its cutting edges. For diameters under one inch, Sumitomo offers a parallelogram insert that allows the customer one index after initial use. Three cutting edges are offered in WDS drills with diameters ranging from 1.00" to 2.00". All WDS sizes are available with side coolant ports and coolant-through shanks in standard (3X) and long (5X) diameter drill lengths.
Features and Benefits
Diameters ranging from 0.5625"- 2.000" with 3X and 5X diameter to depth drill lengths
- Coolant through capable with additional side coolant ports
- Inserts for diameters 1.000" use XPMX three edged inserts
- Insert grade availability include AC350 and ACZ310
- Boasts the heaviest feed rates in the industry
|
|
|
|
Drill bits, Reamers
