|
|
Type Series RHF
- with High Speed Spindle Bearings
- with ceramic balls (Hybrid Bearings)
State-of-the-art Precision:
- Radial tolerance <= 2 µm
- Face runout <= 1 µm
- Balance Class (standard) G 1,6
- acc. DIN ISO 1940
- Sealing (standard)
- slinger disk with integrated
- Labyrinth Seal; (optional) Air Purge
- Lubrication (Standard)
- Lifetime, using special grease
- (Optional) Oil - air mist lubrication
- per agreement
- Increased rigidity, primarily from
- the higher number of balls inside the
-High Speed Spindle Bearings on request.
|
|
Fixing the unit per flansh
stable construction with hardened and ground spindle
high precision
speed range up t0 15.000 rpm
power up t0 50 kW
labyrinth seal with stop-air connection
variable belt box position
variable drive-transmission ratio
automatical tool change possible by pneumatic or hydraulic operation
internal coolant transport or minimum lubrication possible
|
|
ES915 - ISO30 ES915 - ISO30 - Short Nose - Electric-fun H6161H0284A
Electrospindle ES915 Short Nose, electric-fun cooled, power 3,8kw, 220V, bearings Ceramic-Ceramic, suitable for workings of wood, plastic and light alloy
|
|
Modern spindle units for effective milling results
Many milling machines - both old and new - have a relatively low maximum speed does have advantages in roughing operations, but are a big drawback to achieving effective feed rates.
Low speed also greatly limits the advantages of modern CNC applications. The results: much longer machining times and loss of valuable production capacities.
We offer a concincing solution for this situation: Pokolm-Voha high-speed spindle systems for the most profitable machining results.
|
|
|
3 size of Power (7.5kW - 12kW - 15kW) in only electrospindle that can be to speed 24000rpm or to speed 30000rpm
|
|
For many years OMLAT Spa has been successfully manufacturing liquid cooled electrospindles for wood-working.
Today Omlat, thanks to new technologies, has developed a new series of electrospindles called DELTA AIR.
DELTA AIR is cooled by an electro-fan fitted on the electrospindle granting low maintenance costs.
The peculiarity however is its design which allows to change the shaft kit (nose, shaft complete with front & back bearings) in only 3 minutes.
This process can be done by an operator without Omlat engineer intervention.
DELTA AIR main characteristics:
-Tool attachment (HSK or ISO)
-Electrospindle nose (LN – long nose or SN – short nose)
-Speed (18000rpm or 24000rpm)
-Poles (2 or 4)
-Voltage (220V or 380V)
-Power (5kW, 7,5kW or 12kW).
|
|
The high speed spindles and electrospindles designed and manufactured by OMLAT are an example of innovation and technical precision from 50 years. This is a consolidated tradition and the basis to establish a relationship of trust with lots of partner companies whose success is a great satisfaction for OMLAT.
The technology of the electrospindle has recently spread over a lot of fields where high speed cutting operations are necessary to spare time, to reduce the costs and to guarantee perfect results and reliability (Wood working, plastic, aluminium, glass, graphite and composite materials). Omlat with its "know-how" is able to follow this continuous technical evolution and to offer spindles and electrospindles for all working operations requiring power, speed, stiffness and application.
OMLAT spindles and electrospindles are a sample of tecnology and precision, a good solution for high quality results.
|
|
Electrospindle heads
One of the aspects that permitted to FPT to excel in the International markets during these years is that to be able to understand and transform into real jewels all designed accessories that fitted out its range of production.
This very innovative concept has characterised FPT products since 1994, making the difference in terms of exploitatation of the machines, of machining quality and low cost management, and saving tools, clamping systems and time.
Another example of FPT innovation is represented by the 5 continuous axis twist head with power gear driven spindle, named TTWM.
|
|
SD 60124
Mounting diameter (mm) : 120
Operating speed (rpm) : 500 - 20000
Motor type: synchronous
Max. power (kw) : 12.6
Collet capacity (mm): 16
Tool interface: automatic, HSK E40
|
|
IMT offers the correct spindle solutions for a variety of customer requirements.
Our specialties are ”turn key ready” concepts, adapted specifically to your individual requirements. You’ll find out more about our proven modular concepts in this brochure.
By taking advantage of our technology, you will profit from many of our additional product features as well as discovering the appropriate IMT spindle to meet your needs. Especially useful are our spindles with an exchangeable spindle shaft module. This feature allows you to easily exchange individual elements on your own, saving time and money.
We will gladly advise you in the planing stages of your project to find an optimal solution to meet both your economical and production needs.
|
|
The Omlat has planned and realized a line of electrospindles it specifies for workmanships of the light leagues for the industry aeronautical and aerospace American.
The peculiar characteristic of these electrospindles is a little while ago to unite characteristics of power disbursed to the high speed of rotation up to unthinkable.
We list a practical example:
- speed of rotation n 24.000/1
- power (S1/100%) kW 80
- attack utensil HSK A63
Another example realized particularly interesting:
- speed of rotation n 18.000/1
- power (S1/100%) kW 101
- attack utensil HSK A100
attached photo of one of the quoted electrospindles
Such electrospindles allow to work particular decidedly drawn by the full one in times meeting places in comparison to the past, with improvement also of the worked surfaces.
|
|
The electrospindle VITRUM (asynchronous three-phase) is realized with integral shaft for the water passage and it is ideal for bevelling and polighing of glass slabs.
TECHNICAL FEATURES:
STATOR: windings featuring double encapsulation
ISOLATION CLASS: F or superior.
BEARINGS: Front: angular contact ball bearings
Rear: deep groove ball bearings
ROTOR: squirrel-cage rotor
HOUSING: high resistance extruded aluminium
BEARING HOUSINGS: front and rear made of cast iron
COOLING: self-cooling with fan
SPEED: 1.400 - 3.500 rpm.
POWER: 1,5-2,5 Hp./ 1,1-1,8 kW.
IP CLASS: IP55.
UPON REQUEST: Varnishing, different power and polarities.
|
|
Omlat has planned and realized a line of electrospindles for glass working.
Here under we list the main characteristics of these electrospindles:
- Lenght: L=567 mm
- Max Speed: n 14.000 min-1
- Max Power (S1/100%): 8 kW
- Max Torque (S1/100%): 12.7 Nm
- Lubrication of the Bearings: Grease
- Tool Clamping: ISO 40 with pneumatic clamping
|
|
The ECR 16 spindles range have automatic tool changer for routing and engraving machines for glass, stone, marble and granite working.
STATOR: windings featuring double encapsulation
INSULATION CLASS: F or superior
BEARINGS: front: couple of pre loaded bearings with precision angular contact
rear: couple of pre loaded bearings with precision angular contact
ROTOR: squirrel-cage rotor.
HOUSING: high resistance extruded aluminium.
BEARING HOUSING: rear and front bearing housing in cast iron.
MOTOR COOLING: self air cooling.
SPEED: 2.800÷10.000 rpm. (12.000 rpm. upon request)
POWER: 12,5 Hp /9,2 kW. (4 poles- 100 Hz.).
IP CLASS: IP 55
SLEEVE: rotary union for water passage (VEM patent)
TOOL ATTACHMENT: MAS BT 40 cone
TOOL CHANGE: pneumatic
OPTIONALS BY REQUEST:Varnish, different power and polarity requirements, orientation resolver, orientation sensors and centring piston, incremental toothed-wheel encoder, IV axis, ISO 40 cone and maintenance kits.
|
|
Omlat has planned and realized a line of electrospindles for granite and marbles/working.
- Lenght: L=557 mm
- Max Speed: n 10.000 min-1
- Max Power (S1/100%): 15 kW
- Max Torque (S1/100%): 24 Nm
- Lubrication of the Bearings: Grease
- Tool Clamping: BT 40 with pneumatic clamping
|
|
They are used for special machining on vertical and horizontal spindle grinding machines (i.e. dovetails, slideways, diets etc..). Surface grinding machines (next to the main spindle), milling-planing machines or transfer machines are often equipped with these electroheads.
Great powers are then used on surface grinders (face grinding with segmental wheels).
|
|
Perfect dressing with IMT spindle systems
IMT dressing spindles are available with and without touch sense function for a com- pletely monitored dressing cycle. For ID grinding or form grinding, IMT has the right dressing concept for you.
|
|
Company OMLAT spa is a company gives beyond 60 years specialized in the planning and realization of mandrels/elettromandrini for the field of blots of it tools.
The recognized peculiarity of the Omlat to realize entire the productive cycle is thought characterizing for the high level of professionality that beyond 200 adetti they confer to the entire range of production.
The constant attention of the Omlat in examining and proposing finalized solutions to improve the characteristics of blots some is the base of the continuous evolution of the product is in technological terms that of just equilibrium quality/price. The Omlat puts in evidence a solution online with how much sopraindicato represented from a part fixed support on the head machine and the other called part cartridge that allows a fast substitution of the elettromandrino reducing the times of substitution and riavvio.
|
|
No more than 15 years ago they were used to equip special-purpose grinders, while nowadays they are often included in the standard equipment of general-purpose grinders thanks also to the remarkable versatility in electronics.
Electrospindles are largely used in mass-production; in fact, manufacturers of bearings, ball and socket joints, injectors and pumps are all great users of this component.
In addition, the automation in wheel replacement has markedly increased their use.
|
|
Known for the crank-style multiple-spindle drill head, Zagar can place more drills, taps, reamers, and other rotating tools closer than any other manufacturer. Heads are also available with gear and flex drive spindles.
142 Spindle, 28” Square, Multi-Spindle Head
8 Spindle, 8” Square, Multi-Spindle Head with sealed linear ball bearing, guide post bushings
|
|
PITCH 25 mm, 30 mm or 32 mm
MAXIMUM RPM 10,000
MAXIMUM TORQUE 5 Nm
GEAR RATIO 1:1
WEIGHT 0 to 16 lbs.
TOOL OUTLET Weldon 10 mm / ER 16 Collet System ( 30 mm and 32 mm Pitch Only )
Benz vertical (or horizontal) multiple spindle drill head. Applications: light to medium line boring operations. Ideal for CNC machines which are not equipped with a dedicated drill head. This unit can be equipped with Weldon straight shank drill connections or ER16 nut and collets. It is available with 3 (three), 5 (five) or 7 (seven) spindles. In the horizontal configuration this unit is available as a single or double sided outlet. Pricing is shown for the 5 (five) spindle unit.
|
|
A major enhancement to our range of units, mutiple-spindle heads and angular heads are available to increase production cycle efficiency and reduce machining costs. Su-matic products, in both standard and special versions are well suited to fit our standard MAX units for an effective production solution, or can add efficiency to your CNC machining center. Profit from your investment in record time with the Production expert.
|
|
OUTPUT ER8 to ER32 (More options, call for details)
RATIO Call for details
TAPER CAT, BT, HSK, Capto, NMTB, etc...
TORQUE 10 Nm to 50 Nm
Reduce overall machining time for many applications!
BENZ multi spindle heads are the only possibility to increase production volume and lower the price per unit produced at the same time.
BENZ Multi Spindle Heads are modular in design, which makes it possible to reduce outer dimensions and weight to a minimum. This means, even machines with limited room and weight capacity in the tool changer, can be equipped with multi spindle heads. A high degree of component standardization enables us to build many different spindle configurations within a short time frame.
|
|
These units are available in three sizes, LBL25, LBL35 and LBL45, each size covering a specific diameter range, totally up to 20 mm in steel. The basic units can be fitted with different chucks, twin heads for simultaneous drilling of two or more holes and attachments for chip removal and tapping.
Highly dependable units featuring quick and precise clamping, making them highly dependable. Easy to build into systems and have several holes drilled in a single operation since several of these compact units can be built together.
|
|
This very compact BE22-series of E2 drilling units comes in a wide range of speeds, with multi-spindle heads and a several different chuck alternatives.
It's sturdy designe secures a long life of precision drilling.
|
|
|
|
Spindles, Motor-spindles
