|
|
Magnehelic Differential Pressure Gauges
- Model Number:2005
- Range, Inches of Water:0 to 5.0
- Minor Div.:.10
Photohelic Differential Pressure GaugesSwitch
- Model Number:3025
- Range, Inches of Water:0 to 25
- Minor Div.:.50
|
|
4503, 4906, 4901
Differential Stainless Steel pressure gauge
Differential pressures are commonly used in industrial process systems. Differential pressure gauges have two inlet ports, each connected to one of the volumes whose pressure is to be monitored. In effect, such a gauge performs the mathematical operation of subtraction through mechanical means, obviating the need for an operator or control system to watch two separate gauges and determine the difference in readings.
|
|
|
|
|
|
Miniature Differential Pressure Gauges
These miniature differential pressure gauges measure the pressure difference between two points. Acting in the place of two pressure gauges, these units allow for one simple reading on an easy-to-read scale. Popular in filtration, flow and level applications, they are a low cost alternative to bourdon tube and bellows designs. Both piston and diaphragm sensor models are available as in our standard size instruments. Their small size and low cost make them ideal for OEM use.
We offer them with bodies (and wetted parts) of aluminum. The indicator models come standard with a 1" molded plastic lens while a 2" dial is available as an option. A variety of porting options allow for any mounting configuration.
A red/green dial with a breakpoint located at 70% of full scale alerts the user of the condition of the process. This matches the setpoint of the reed switch if ordered together.
Note: Our piston sensor models are best for liquid applications as they have a slight amount of fluid migration from the high to low pressure ports. Select our diaphragm models for air or gas applications or where fluid migration cannot be tolerated.
|
|
|
The Series P2000 differential pressure gauges are low cost, diaphragm operated, mechanical pressure gauges in an ABS housing. The P2000 gage can be used in applications for measuring positive, negative, or differential pressure with an accuracy of 2%. Standard applications include monitoring filter status, duct static pressure, room pressure, fan or blower pressure, paint booths, dust collectors, and cabinet purging along with many others.
|
|
Aluminum Housing
The Series S2000 differential pressure gauges are low cost, diaphragm operated, mechanical pressure gauges. The S2000 gage can be used in applications for measuring positive, negative, or differential pressure with an accuracy of 2%. Standard applications include monitoring filter status, duct static pressure, room pressure, fan or blower pressure, paint booths, dust collectors, and cabinet purging along with many others.
|
|
|
The Series S2000 differential pressure gauges are low cost, diaphragm operated, mechanical pressure gauges. The S2000 displayed has an aluminum housing with a stainless steel front ring and can be used in applications for measuring positive, negative, or differential pressure with an accuracy of 2%. Standard applications include monitoring filter status, duct static pressure, room pressure, fan or blower pressure, paint booths, dust collectors, and cabinet purging along with many others.
|
|
The Webster DHT 1 Series Digital Hydraulic Testers accurately measure flow, pressure and temperature. Webster testers are designed to conveniently check the performance of hydraulic pumps, motors, valves and hydrostatic transmissions.
This easy to use diagnostic tester has simplified controls and can pin-point hydraulic system faults, reducing downtime and helping in preventive maintenance. The tester comprises a turbine flow block and a large easy to read digital display which indicates both flow and temperature.
The tester has a built-in loading valve to simulate the working pressure during normal machine operation. The built-in safety discs protect the machine and operator in event of excessive pressure, allowing oil to safely bypass the loading valve INTERNALLY with no spillage of oil from the hydraulic circuit, eliminating clean-up costs and environmental hazards.
|
|
|
|
|
|
The Webster DHM 3 Series Digital Hydraulic Multimeter is an all-in-one unit designed to test the performance of hydraulic pumps, motors, valves and hydrostatic transmissions.
The easy-to-use design allows the operator to just switch on and test, without complex setup or special training.
The DHM measures flow, pressure and temperature. In addition, the DHM holds the peak pressure value as well as calculating hydraulic power and volumetric efficiency using the unique P-Q test button.
The DHM is the ideal tool for pinpointing hydraulic system faults, reducing downtime, and helping in preventative maintenance. The design builds on the very successful Webster DHT range of portable testers with the addition of a large digital display and a built-in pressure transducer.
The turbine flow meter with built-in loading valve is bi-directional and specifically designed to enable the operator to simulate the maximum working pressure safely during normal machine operation.
The loading valve has safety discs built-in to protect the operator and the multimeter in the event of excessive pressure, allowing oil to bypass the loading valve INTERNALLY with no spillage of oil from the hydraulic circuit, eliminating any danger to the operator or environmental hazards.
|
|
The PFM6 Series is a compact, lightweight digital
portable tester designed for fast diagnostic
troubleshooting of all types of mobile or
stationary hydraulic systems and components.
These self-contained testers feature laboratory
accuracy and provide fl ow, pressure and
temperature measurements simultaneously
from one point.
Carrying handle for improved portability
Bi-directional model available
|
|
|
The series A1 digital differential pressure gage is a patent pending microprocessor based digital pressure gauge for positive, negative, and differential measurement designed to be a direct replacement for mechanical gauges. The Series A1 differential pressure gauges utilize an extremely stable piezoresistive sensing technology to give a standard full scale accuracy of 1%. For applications requiring better accuracy, the A1 is also available with 0.5% accuracy. The A1 pressure gauge also has an optional 4-20 mA output for applications requiring an output signal. The A1 features a bright ½" LED display, which gives the gauge improved readability and precision. The A1 digital differential pressure gauges also feature 5 user selectable engineering units including in. w.c., mm w.c., cm w.c., kPa, and Pa. The Series A1 offers an improved look, and performance compare to mechanical gauges for a similar price.
|
|
|
The series A2 digital differential pressure gage is a patent pending microprocessor based digital pressure gauge for positive, negative, and differential measurement designed to be a direct replacement for mechanical gauges. The Series A2 differential pressure gauges utilize an extremely stable piezoresistive sensing technology to give a standard full scale accuracy of 1%. For applications requiring better accuracy, the A2 is also available with 0.5% accuracy. The A2 pressure gauge also has an optional 4-20 mA output for applications requiring an output signal. The A2 features a bright ½" LED display and process arch, which gives the gauge improved readability and precision. The A2 digital differential pressure gauges also feature 5 user selectable engineering units including in. w.c., mm w.c., cm w.c., kPa, and Pa. The Series A2 offers an improved look, and performance compare to mechanical gauges.
|
|
HVAC measurement device PascalMaxx for monitoring & control
Differential pressure instrument with membrane measurement technology for monitoring and control of differential pressures and air flows in HVAC applications. Suitable for rooms and ducts.
By the integrated switch the pressure conditions can be monitored and an alarm set in case of need. The also integrated analogue outputs (V and mA) can be used for a system control. The automatic Zero-Point calibration assures an accurate and reproducible measurement at any time and avoids any influence of the mounting position on the measurement results.
|
|
One M1 digital pressure gauge can replace three or more mechanical gauges
Unlike Mechanical Gauges:
- Dropping can’t affect accuracy. The housing and boot are compatible with many industrial fluids including Skydrol®
- Overpressure doesn’t affect accuracy
- Repeatable readings
- No temperature or gravity effect
Unlike Other Digital Gauges:
- More resolution
- Shock mounted electronics
- Protected LCD
- Uniform backlight
- Very easy to use, no manuals, no menus, no problem!
Unlike Anything Else:
- 0.2% of reading! Like a deadweight tester!
- Calibration report with data at five temperature
- Replace three or more 0.25% standard gauges
- CE certified and manufactured under a ISO 9001 registered quality system
- Runs on 2 AA alkaline batteries providing up to 30,000 hours of service
- Precision and performance at an affordable price
Pressure is Our Business!
|
|
The CP 440 Digital Pressure Test Gauge takes the concept of an analog Test Gauge,and brings it to a new level,as only Beta Calibrators can do. The CP 440 combines the accuracy of digital technology with the simplicity of an analog gauge,and achieves performance, ease-of-use,and a feature set unmatched in the pressure measurement world.Setup of the CP 440 is fast and straight-forward, through a menu-driven display,with minimal text,and intuitive functions,that is simple enough to allow the gauge to be used anywhere in the world,without the need for multilingual displays.The availability of optional sanitary seals that meet 3A standards per specification 37-01 allow the gauge to be used in virtually any application.
|
|
Battery operated digital reference pressure gauges:
Type TLDMM: Accuracy ±0.05% f.s.
Type TLDMM-A01: Accuracy ±0.1% f.s.
Type TLDMM-A02: Accuracy ±0.2% f.s.
Type LDM 70-E25: Accuracy ±0.25% f.s.
Type LDM 70-K50: Accuracy ±0.5% f.s.
A lot of different pressure ranges between 0/100 mbar and 0/2000 bar available.
The pressure unit is switchable to psi, MPa, and other units.
Robust contruction, wetted parts in stainless steel.
Precise measurement of pressure and pressure peaks.
Optional with RS232-interface (TLDMM-types)
Optional in build-in case for panel mounting (TLDMM-types).
Pressure port: 1/2" BSP male, stainless steel
|
|
|
|
|
|
SSI Technologies Inc. MediaGauge™ Digital Pressure Gauges have superb accuracies up to ± 0.25 % full scale and include both stand alone (9V battery) and loop powered versions with switch. The MediaGauge™ Digital Pressure Gauges have better accuracy, longer life and standard multiple functions which make it a better choice than mechanical pressure gauges. They are ideal for use in many applications such as Refrigeration, Process Control, Test and Measutement, Fuel Cells, Pumps, Hydraulics, Pneumatics, Compressors and Agriculture.
The MediaGauge™ MG-9V digital pressure gauge is made of all laser-welded 304L & 316L stainless steel for optimal media isolation and usage in a wide variety of media. These compact (2 1/2 - 3 inch), robust (NEMA 4X Rating) gauges measure pressures from 5 PSI to 5000 PSI.
The MediaGauge™ digital pressure gauge comes standard with a variety of keypad operated functions – multiple pressure unit display reading (PSI, BAR or MPA); memory storage of maximum peak pressure reading; and zero adjustment.
|
|
The HPM110 digital pressure gauge is designed for continuous monitoring of oil, gas, water, hydraulic and other pressure media in mobile equipment, industrial hydraulics, compressors and process control equipment.
The HPM110 offers an economical solution to monitoring pressure and peak pressure with a simple visual display. The hand-held unit can be installed when required using a standard test point, or left permanently connected in a system. Since the HPM110 is battery powered it requires no external wiring.
The HPM110 simultaneously displays actual pressure, peak pressure, battery level and the engineering units selected. The back light can be switched on at the press of a button. Using the
buttons on the front panel the user can clear the peak value, display min, max and actual pressure, reset the zero point and change the engineering units. The unit is available in four models, please see reverse for details.
|
|
MICO Digital Pressure Gauges are the versatile and economical choice for a wide variety of applications. These are 10,000 PSI gauges with terminal point accuracy, which allows re-zeroing to eliminate sensor offset. Full scale .5% terminal point accuracy includes linearity, hysteresis, and repeatability.
The standard MICO gauge has a chemical resistant Noryl® case and comes with a protective boot, which has an IP54 rating. They are also available with 12" or 36" hoses and a 16-piece fitting kit. MICO gauges meet ASME B40.7 standard and comes with a CE approval.
Other standard features of these gauges include nine engineering units of measure, 5 digit display with 1/2" character size, backlight, minimum and maximum pressure indication, and a welded stainless steel 1/4" pipe socket and sensor. Their proof pressure is 120% of the range and their burst pressure is 150% of the range.
|
|
The DPG8000 series digital pressure gauges offer 1/4% full scale accuracy in a rugged, easy-to-use unit at prices comparable to mechanical test gauges. All stainless steel wetted parts make it suitable for a wide variety of liquid or gaseous media. This product features user-selectable units of measure allowing one gauge to be used for a variety of pressure scales.
The DPG8000 comes standard with many features that are either not available or offered only as options on many competitors’ digital gauges such as backlight, peak hold and a four-digit display.
- Enhanced Value Versus Mechanical Gauges
-1/4% Full Scale Terminal Point Accuracy
- 4 Digit Display with 1/2" High Digits
- Backlight Feature for Enhanced Visibility
- User Selectable Engineering Units
- G1/4 (1/4" BSPP) or 1/4" NPT Threads Available
- Maximum Pressure Indication
- Stainless Steel Wetted Parts
|
|
Digital Displays, Meters, and Manometers: Setra's LCD digital displays can be used in-line or as an integral part of the pressure transducer or transmitter. The Datum 2000 manometer is a complete system, includes choice of Model 204, 204D or 239. In addition, Setra's Datum 2000 meter and manometer feature a user-friendly selectable menu.
Model LD330: The Model LD330 with Liquid Crystal Display (LCD), can be configured in line between Setra's pressure transducer (or transmitter) and a data acquisition system. Value is built in to the design with a rotatable housing for optimum display viewing at any angle.
Datum 2000: Dual Channel Meter or Manometer - The Datum 2000 Dual Channel Meter can be configured externally with one or two pressure transducers or transmitters. The Datum 2000 Manometer is a fully self-contained unit with factory installed pressure transducer or transmitter.
|
|
|
|
|
|
The Ashcroft® Digigauge® Family brings industry leading features to the marketplace.
The award-winning Ashcroft® digital test gauge features unmatched accuracy specifications of .05% Terminal Point, Total Error Band full-scale including span, linearity, hysteresis and temperature from 0 degrees to 1500 degrees F.
The new Ashcroft Type 2089 digital gauge comes in the industry’s smallest case size of (3") yet has the largest display – larger than even competitors' 4" gauges. The display offers backlighting with adjustable contrast levels. This gauge features 12 selectable engineering units, seven languages, and it can be calibrated in the field. Calibration and dampen modes are password protected. Three AAA Alkaline batteries provide over 1000 hours of battery life. The gauge is CE approved and FM approved for intrinsically safe operations, Class1, Division 1.
The Ashcroft® Type 2274 industrial digital gauge has the breakthrough features of 4-20 mA output, switching capability, and an extra large digital display. It is available in three case types.
The general purpose digital gauge, Type D1005PS, has 1/2% full-scale terminal point accuracy, large 1/2 inch character size and brings standard features to the digital gauge market that, until now, were either not offered or were provided only as options on competitor's products.
|
|
|
|
|
|
This digital manometer is the ideal solution for local digital display independent of the mains. The integrated battery allows measurements to be made independent of a fixed source of power.Accuracy, reliability and mechanical resilience make the digital manometer suitable pressure measurement tasks in numerous applications.
The stepped measuring ranges extend from 2 bar up to the high pressure range of 700 bar. For pressure ranges above 50 bar, the casing and parts that come into contact with the measuring medium are made of stainless steel and thus resistant to attack from chemically aggressive media.
The additional integrated bar graph display with a trailing pointer function shows the trend in current working pressure directly. The model P3962 comprises a further 4 ½-digit display for a direct readout of peak value, tare and other parameters. Internal lighting ensures the display is optimally lit for a clear readout even in unfavourable lighting conditions.The buttons on the front are used for adjustment of the programmable parameters.
The digital manometer meets electromagnetic compatibility requirements (EMC) to EN 61326.
|
|
This is a highly accurate microprocessor-controlled pressure measuring instrument. SensoBrainTM, a KELLER-designed low power signal processor, transmits the signals of the pressure- and temperature sensor to the microprocessor, which digitally compensates the sensor data. This mathematical modelling of the pressure sensor virtually eliminates all errors over a wide temperature range. All KELLER- and KAVLICO-sensors are compatible with the electronics of the Intelligent Manometers.
Mano Gauge and Mano Record also available in EEx ia-version.
|
|
Model : MN14
DS : 100-150
Mechanical intervention : sliding, inductives, electronic
Intervention number : 1...2
Protection degree : IP 44
|
|
KL 160_117N 2008/ 02 E
Application:
For all gaseous and low-viscosity liquid media that will not obstruct the pressure system or attack copper alloy parts.
Suitable for industry, heating, water supply,air-conditioning, pneumatics. Pressure gauge for use and control of pressure facilities.
|
|
|
|
|
|
XP2i-DP Wet Wet Differential
XP2i-DP Features:
- High accuracy, long term vacuum measurement
- 0.1% of reading wet/wet differential transducer
- 15 and 100 PSI versions rated to 100 PSI static pressures
- Transform your XP2i-DP into an indicator for Torque, Force, Level, or any other unit using the Custom Units Wizard using the free ConFigXP software
- Add special features such as Pressure Safety Valve (PSV) mode to capture valve open/close pressure
- Customizable for panel mounting or portable configurations
- ATEX / IECEx / CSA intrinsically safe
- Optional datalogging capability
- LCD backlit display
- Easy to use buttons
Applications
- Gas filter testing
- Level measurement
- Rotary gas meter testing
- Autoclave vacuum monitor / calibration
Included with every new XP2i-DP Differential Digital Pressure Gauge is an A2LA accredited calibration certificate with test data recorded at 5 different temperatures - proving that it meets published specifications over the entire operating range. You won't get this kind of detailed report anywhere else!
|
|
Utilising its vast experience of providing high quality instrumentation solutions to the worldwide industry, Delta Controls has launched a comprehensive range of instrument gauges.
These guages are produced to the usual high specification and quality that process plant operators, engineering contractors and OEM customers demand and expect from Delta Controls.
By carefully selecting worldwide suppliers that produce to the high quality demanded by Delta, customers can now specify gauges to complement Delta's comprehensive range of pressure process instrumentation.
|
|
A new line of Ashcroft® differential pressure gauges brings a high-quality, cost- effective pressure instrument to the market. The new 1130 Series from Dresser Instruments uses a close-coupled magnetic rack-and-pinion design with four pole magnets to achieve superior stability.
The Ashcroft Type 1130 Series offers an exclusive, weather-resistant stainless steel case, suitable for many processes and environments. An exclusive design on the Ashcroft 1130 Series with an aluminum body, enables the user to order the unit with a field-adjustable switch or to add the switch at later date. This translates to a cost savings as this versatile and efficient unit can be re-adapted for changes in the application.
Visit our website for other Ashcroft differential pressure gauges.
|
|
Hazardous Location Differential Pressure Gauges
Hazardous location differential pressure gauges measure the pressure difference between two points. Acting in the place of two pressure gauges, these units allow for one simple reading on an easy-to-read scale. Popular in filtration, flow and level applications, they are a low cost alternative to bourdon tube and bellows designs.
These hazardous location differential pressure instruments are used in environments containing hazardous vapors, gases or particulates. The switches and electrical connections are housed in special UL, CSA, FM and ATEX approved enclosures. The cast aluminum housings have two mounting lugs, a 3/4" NPT electrical conduit port, and meet the following specifications: Class 1, Gr. B, C, & D; Class II, Gr., E, F, & G; and Class III. They also meet NEMA 3, 4X, 7, 9, & 12 specifications.
|
|
|
|
|
|
The Best Digital Gauge on the Market, Just Got Better!
The 2nd generation XP2i is a very rugged, intrinsically safe, digital pressure gauge that fits in your palm with 0.1% of reading accuracy.
Unlike Other Digital Gauges:
- New nickel plated aluminum enclosure is sealed to IP67 (waterproof to 1 meter)
- Backlight is twice as bright, but batteries last just as long
- 10% larger LCD window for a larger viewing angle
- Internal pressure is equalized by a GORE-TEX® filter
- All XP2i gauges are now CSA, IECEx and ATEX certified intrinsically safe
- Captures open and reseat values for Pressure Safety Valve (PSV) testing
- Optional pressure datalogging capability
- Torque and force measurement capable
- Simple to use
Unlike Mechanical Gauges:
- Dropping can’t affect accuracy
- Overpressure doesn’t affect accuracy
- Repeatable readings
- No hysteresis
- No temperature or gravity effect.
Unlike Anything Else:
- 0.1% of reading! Like a deadweight tester!
- Calibration report with data at five temperature
- Replace three or more 0.25% standard gauges
- Pressure recording by DataLoggerXP to record pressure and ConFigXP to enable or disable features
- Customize your XP2i for panel mounted configurations or portable applications
- any XP2i can be cleaned for oxygen service
- CE certified and manufactured under a ISO 9001 registered quality system
- Runs on 3 AA alkaline batteries providing up to 1,500 hours of service
Pressure is Our Business!
|
|
|
|
Pressure gauges, Pressure indicators
