|
|
Your ATEX Compact Vacuum Meter for 1050 to 1 mbar
The compact vacuum meter VD82 is fully electronic and combine high quality sensors and modern microcontroller technology with a handy design.
Our customers appreciate these easy-to-operate gauges as reliable tools in plant engineering, service and laboratory.
The digital display of your vacuum meter shows the exact absolute pressure. Sensors with temperature compensation and sophisticated evaluation electronics guarantee precise and reproducible measurement results.
Further Advantages
- External sensor
- Display of minimum and maximum pressure
- Automatic switch-off or continuous operation
- High battery lifetime due to clocked measurement
- Operation with battery or mains adapter
- Robust stainless steel flange
- For mobile use or fixed installtion
|
|
|
|
|
|
The new ergonomically formed professional pressure measurement instruments series S2600 from AFRISO were developed for the accurate measurement of vacuum, pressure, differential and relative pressure of gaseous, non-aggressive media.
The small but robust instruments are well protected against dirt, blows and shocks by an additional outer soft plastic protective housing with a magnet integrated in the back, which offers the user hands-free operation. On the large LC-display two measurement values are displayed simultaneously; LCD transflective technology and on/off switch for back lighting ensures easy-to-read operation in low light environments as well as in direct sunlight. Measured values can be displayed in units of mbar, Pa, hPa, kPa, mmHg, inHg or psi by depressing the key "UNIT". The "HOLD" function enables actual values to be held on display, via "ZERO" it is possible to adjust the zero point any time and as often as necessary. In the operation mode "AUTO" the best possible display of the measured value is pre-adjusted automatically and with an increasing measurement value, the resolution is adjusted accordingly.
The instruments are suitable for medium temperatures from 0 °C to +40 °C and available in three (Differential) pressure ranges as Type S2601 (range 150 mbar, resolution 0.01 mbar), Type S2610 (1.000 mbar, 0.1mbar) with 8 mm standard connections and as Type S2650 (5.000 mbar, 1mbar) with a 3 mm Festo connection. Supply is via two standard 1,5 V Mignon batteries.
The instrument Series S2600 is certified according to EN 50379-2 and therefore particularly suitable for all official measurements. There are a multitude of applications for these attractively styled and handy instruments in industry, laboratories and in the HVAC sector. The measuring instruments are for instance used for the testing of filters and gas pipes, for checking ventilation systems and liquid tanks or for chimney draught and vacuum measurements.
|
|
Function : Pressure, air velocity and air flow with Pitot tube
- Manual self calibration
- Adjustable climatic parameters for air velocity compensation
Measuring ranges :
> MP 100 - MP 120 : from 0 to ±1000 Pa
> MP 101 : from 0 to ±1000 mH2O
> MP 105 : from 0 to ±500 mbar
> MP112 : from 0 to 2000 mbar
Supplied with calibration certificate.
Join our distribution network all over the word....Contact us !
|
|
Serie 2000, C300/310/320, HMG1
portable handheld digital pressure gauges:
Für precise measurement of pressure, vacuum and differential pressure.
Ranges 0/25 mbar, 0/130 mbar, 0/500 mbar, 0/1 bar, 0/2 bar, 0/7 bar, 0/10 bar and 0/2 bar absolute.
Accuracy 0.15% of reading +0.15% of full scale value 1 digit.
Easy operation, great performance, rigid housing IP 67, overrange protection, autoranging displays for precise readings, selectable auto switch-off.
Three versions are available:
Basic version, extended version with Min/Max storage and selectable pressure unit and version with data logging and leak testing functions.
Zeroing simply by pressing one key.
Other types (C300/C310/C320, LPM3, HMG1) also available.
|
|
General description:
Handy instrument for measuring differential pressures in gaseous media
The ManoAir100 displays with a high precision. Its robustness is appropriate for a mobile or a laboratory use. With the digital hand-held micromanometer ManoAir100, relative and differential pressure values of instrument air and inert gases up to 20 kPa can be measured accurately, simply and quickly.
|
|
|
|
|
|
Your Compact Vacuum Meters for 1600 to 5 x 10-4 mbar
Compact vacuum meters of the VD8 family are fully electronic and combine high quality sensors and modern microcontroller technology with a handy design.
Our customers appreciate these easy-to-operate gauges as reliable tools in plant engineering, service and laboratory.
The digital display of your vacuum meter shows the exact absolute pressure. Sensors with temperature compensation and sophisticated evaluation electronics guarantee precise and reproducible measurement results.
Optionally the vacuum meters can be used as datalogger in
order to store pressure data during the measurement. By push of a button those data are easily transmitted to a PC where they can be analysed and documented for your quality assurance using our VacuGraph Windows software.
Mobile use or fixed installation? Integrated or detachable sensor? Quick spot check of actual pressure or documentation of measurements on PC? The VD8 will always be in compliance with your wishes.
Further Advantages
- Display of minimum and maximum pressure
- Automatic switch-off or continuous operation
- High battery lifetime due to clocked measurement
- Operation with battery or mains adapter
- Robust stainless steel flange
|
|
BARFLEX ® 4 portable electronic pressure gauge
- Fields: Chemical and Petrochemical Industry, Food and Beverage Industry, Pharmaceutical and Biotechnical Industry, Heating, Ventilation and Air, Conditioning, Machine and Process Industry, Power Plants and Distribution, Automotive Industry
- Type: BARFLEX4
- Application: A self-contained instrument ideal for measurements in the field
- Measuring ranges: 0...1 bar to 0...400 bar A/G, -1...0.6 bar to -1...24 bar G
BARFLEX ® 4Y portable electronic pressure gauge
Fields: Chemical and Petrochemical Industry, Food and Beverage Industry, Pharmaceutical and Biotechnical Industry, Heating, Ventilation and Air Conditioning
- Type: BARFLEX 4Y, Intrinsically safe
- Application: A self-contained instrument ideal for measurements in the field. Intrinsically safe
- Measuring ranges: 0...1 bar to 0...400 bar A/G, -1...0.6 bar to -1...24 bar G
|
|
Digital handheld pressure gauge HM 35
For measurements in the area of relative, differential or absolute pressure
Data Memory for 10.000 measurements
Versatile range of applications
Compact and easy to operate
Measuring media: instrument air, inert gases, media compatible with stainless steel 18/8
22 selectable measurement units
Large, well readable graphics display
Infrared interface (IR)
Measurement for leak rate
MIN./MAX. and average values
Real time clock including date
Incl. free of charge SCS certificate
|
|
KIMO specially designed and developed MP200 for pressure, air velocity and airflow control.
Simple, accurate and intuitive, MP 200 has a large colored display and easy browsing is done thanks to its joystick on keypad.
Multi-probes, innovative and evolutive, it can be equipped with :
- 5 differents pressure module : from 0 to ±1000 Pa, from 0 to ±1000 mmH2O, from 0 to ±500 mbar, ±2000 mbar, from 0 to ±10 000 Pa.
It can be equipped with interchangeable measurement modules which are individually calibrated and are automatically recognized by the instrument.
- Thermocouple temperature probes (until 4 inputs simultaneously).
- CO probe for air quality control
- Pitot tubes and Debimo blades to realize velocity and airflow measurements from 2 to 100 m/s and from 0 to 99 999 m3/h.
MP200 can measure, store up to 8,000 values and restore on PC (wireless communication).
Join our distribution network all over the word....Contact us !
|
|
|
|
|
|
Hydraulic pressure testing system that monitors and diagnoses fluid systems in a snap. Snap-Check enables machinery manufacturers to test system pressure quickly, easily, and leak-free. In the case of larger equipment, Snap-Check enables system pressure to be checked both after it is assembled at the factory and following reassembly at customer locations. The low-profile system identifies operating pressure and surges, without the need for a permanently installed gauge or transducer.
Requiring only one hand for connection and disconnection, CEJN Series 358 couplings and nipples make up the most user-friendly pressure testing system available. The Snap-Check system offers:
- Working pressures up to 60 MPa
- Smooth operation in temperatures from -40° F to +212° F
- Standard red plastic dust caps or optional metal screw-on caps that keep the system clean and free from grit and dirt when not in use
- Variety of thread configurations, including NPT, BSP, BSPT, metric, and SAE
- Long-lasting, reliable, test-port fittings and couplings for numerous applications, such as mobile hydraulic off-road equipment
Snap-Check liquid-filled pressures gauges are available in a wide variety of sizes and pressure ranges.
|
|
Model : MN17/L
DS : 250
Ranges : 0...1/0...1600 bar and vacuum
Working pressure : max 75% of FSV
Accuracy class : 0.1...0.25 as per EN837-1
Protection degree : IP 44
Wetted part : AISI316L, beryllium copper alloy
Other features : anti-parallax dial
|
|
Flex-Tube® U-Tube Manometer - Series 1221/1222/1223
Ranges from 8 to 36" w.c. (200 to 1000 mm)
Flex-Tube® U-Tube Dual Range Inclined Manometer - Series 1227
Vertical Range 0-16" w.c. (0-400 mm), Inclined Range -0.2 to 2.6" w.c. (-5 to 70 mm)
Flex-Tube® Well-Type Manometer - Series 1230/1235
Ranges from 8 to 36" w.c.
Gas Pressure Manometer - Series 1213
Range from 0 to 15" w.c.
Slack Tube® Manometer/Gas Pressure Kit - Series 1211/1212
Ranges from 8 to 120" w.c. (50 to 100 cm)
|
|
Inclined Tube Manometer
Inclined tube manometers are reliable traditional pressure meters for measuring small over pressure, underpressure or differential pressure. For example, the model MM200600 is ideal for monitoring air filters for contamination.
|
|
|
|
|
|
With the KIMO liquid column manometers it is possible to carry out precise measurements of slight variations in pressure, depression, differential pressure of air or gas.
They are mainly used in the treatment of air, heating, ventilation, air conditionning and dust removal to monitor pressure of filters, clean rooms, chimney flues and ventilation networks.
The Kimo liquid column manometers are produced by machining 15 or 20mm thick PMMA better known by the trademark Altuglas®
Adjustement : the zero point can be set by adjusting the scale after setting the horizontal position of the manometer, using the integral spirit level.
Accuracy : the accuracy is +/-2% of the full scale for the inclined models and +/-1% for the vertical models at a temperature of 20°C with a minimum tolerance of +/-1 scale graduation. Maximum static pressure 6 bars. Operational range from -30°C to +60°C depending on the liquid used.
Standard equipment : standard manometers are fitted with two n°487 connections and are supplied complete with PVC wall bracket, manometric fluid, screws and raw plugs.
Join our distribution network all over the word....Contact us !
|
|
|
|
|
|
DIAL SIZE
1½”, 2", 2½”, 4"
Liquid Fillable Gauges P-1550 Series
Overview
Series 1550 liquid filled gauges combine low cost and high accuracy with a rugged stainless steel case and brass internals for corrosive and high vibration environments.
Typical applications include: pumps, compressors, HVAC, petrochemical
processing, and power generation.
Series 1550 gauges are available in stem (Model 1555 & 1559) or panel mount (Model 1558) configurations with brass socket; phosphor bronze Bourdon tubes are supplied to meet specific customer requirements.
Series 1550 gauges come in 18 vacuum, compound, and gauge pressure ranges (see specifications). Glycerin is standard fill fluid, with silicone or mineral oil available on request. Dry (unfilled) gauges can also be supplied, off-theshelf, by your local stocking U.S. Gauge distributor.
SPECIFICATIONS
DIAL SIZE
1½", 2", 2½", 4"
RANGES
Vacuum 30"-0 Hg VAC (counterclockwise rotation with increasing vacuum) Compound: 30" Hg VAC 0, 15, 30, 60, 100 psi Gauge: 0-15, 30, 60, 100, 160, 200, 300, 600, 1000, 1500, 2000, 3000, 6000 psi ACCURACY: ±1.6% FS
LIQUID FILL
Glycerin is standard but silicone and mineral oil are available. Dry (unfilled) gauges are available as off-the-shelf stock through local distributors
|
|
|
|
|
|
Mobile Measurement kit FM-1-B FLUID-CHECK in suitcase for :
- Flow rate sensors
- Leakage sensors
- Temperature sensors
- Pressure sensors
Examples for :
Fixed displacement pumps Pumping capacity
Variable capacity pumps Percentage of leak oil
Oil coolers Flow characteristics
Water coolers
Differential cylinders Leak oil
Synchronous cylinders Sealing damages
Plunger cylinders Moving speed
Oil motors Leak oil
Pressure accumulators Bladder control
Charging behaviour
Nitrogen charge
Technical Data :
- With multi-purpose display with one separate analogue input, with
4 – 20 mA and scaling facility
- Suitable for display of input channel A or input channel B as well as the sum A+B, the differential A-B or the ratio A:B
- Display range +/- 4 1/2 decades at 15 mm size
- Power supply 115 / 230 VAC or 18 – 30 VDC
- Setup of zero and full scale by means of two front keys and
menu support
- Selectable linearisation functions
Included :
- Power cord 230V AC
- Connecting cable with plug
M12 connector for kit and sensors
- Suitcase made of plastic (black/blue)
Outer dimension 340 x 275 x 84 mm
- Technical documentation and operating instructions
|
|
|
|
|
|
|
The J5 provides measurement of melt pressure and other process variables. The J5 features a large 5 digit display that can operate in either green or red or change color in case of alarm. The J5 is configurable from the front, or from a PC with a software tool. The main input is for Strain Gauge or linear DC voltage/current with square root extraction or with a 16 segment linearizer. The second input with DC voltage or current is suited to temperature indication and signal conditioning (min, max, average, ratio, etc.) when combined with the main input. The J5 has 3 digital inputs independently configurable for alarms, display and calibration handling. Up to four alarms with ISA-A acknowledge are available as well as a retransmission output and Modbus RS485 comms. The J5 has three levels of password protection and the front panel is IP65. The strain gauge bridge of the melt pressure or load cell transducer can be powered by an internally regulated 5 or 10Vdc. The reliability of the strain gauge is monitored continuously. A front panel calibration routine is provided to automatically remove zero and span offsets. The automatic calibration can also be activated by using front keys, one of the three digital inputs, or over serial comms. Tare function for load cells is provided.
|
|
|
Micro-pressure gauges are used to measure inert gases in the gauge, vacuum and differential pressure domain. These instruments have high measuring sensitivity and resolution (scale length up to 4000 mm). With the aid of the mirror ring and knife-edge pointer, measured values can be read accurately and free from parallax error. The micro-pressure gauges can be built into control panels.
|
|
|
|
|
|
This is the key tool for all professionals in HVAC and industry fields.
AMI 300 can measure, store up to 12,000 values and restore on PC (wireless communication) up to 6 parameters alternately.
Pressure, temperature, humidity, air quality (CO/CO2), air velocity and airflow (vanes or hotwire), tachometry.
For visual comfort, AMI has a large colored display and easy browsing is done thanks to its joystick on keypad.
Innovative and evolutive :
- AMI can be equipped with wireless probes supplied with a multifunctional key allowing measurement and settings.
- It can be equipped with interchangeable measurement modules which are individually calibrated and are automatically recognized by the instrument thanks to the Smart-plus system.
- These measurement modules are available for pressure, thermocouple temperature (4 channels), climatic conditions (hygrometry, air pressure, temperature) and current/voltage parameters.
- For instance, AMI can be equipped with several pressure measurement modules with different measuring ranges. This new system allows evolution according to measurements that must be carried out…
- On the same principle, all probes have the Smart-plus system and are therefore automatically recognized by the instrument. Probes are available with adjusting/calibration certificate.
* exept thermocouple probes
- A large choice of probes allows a step-by-step evolution of the instrument according to your needs : vanes Ø 14 mm, 70 mm and 100 mm, high resistance gooseneck–shaped hotwire, CO/.CO2, multifunction, high temperature hygrometry, RTD probes, thermocouple...
Join our distribution network all over the word....Contact us !
|
|
Resato offers a unique combination of in-house engineering and production of both components and systems. We are proud to present our extensive product range. This overview gives a good impression of our scope of delivery of our standard systems. If you wish to receive more detailed information on one or more of our products, please feel free to contact us. Our sales department would be pleased to be of your assistance and is ready to answer any questions concerning our products.
WE ARE LOOKING FOR A DISTRIBUTOR IN ITALY. Please contact us if you are interested!
|
|
The JOFRA range of IPI Industrial Pressure Indicators is ATEX and CSA certified for use in potentially explosive environments in the field or in calibration laboratories. ATEX is the primary intrinsically safe standard in the European Union, while CSA refers to relevant Canadian and USA standards.
Accurate to ± 0.05% FS, the IPI can be used as a calibration reference or in applications where high accuracy pressure measurement is required from safety valve checks to system pressure verification. This Ex certification will allow the IPI to be used in any industry where there is a risk of flammable gases. These include oil refineries, off-shore platforms, chemical plants, gas production plants, oil and gas shipping, pharmaceuticals and in whisky distilleries.
|
|
Digital Pressure Controller/Calibrator - Model 7250
The Model 7250 Digital Pressure calibrator is available in a variety of pressure ranges from 0-5 psi to 0-3000 psi, and is an economical alternative to the Model 7250xi and 7250i. The Model 7250 provides 0.003% of full scale precision and can control to the set point in 15 seconds with no overshoot. When a higher level of performance is required, please refer to the 7250i and 7250xi Digital Pressure Controllers.
|
|
Pressure Indicators
The Vista-Gage is a unique piston-type pressure indicator, specifically designed to withstand machine vibration, shock, pulsation, pressure surges and other rigorous conditions that create problems for conventional pressure gauges, with fragile bourdon tube mechanisms. Available in Vista-Gage for High-pressure, Lo-pressure and Vacuum indicators, Vista-Cator for GO/NO-GO indicators, and Vista-Monitor for Accumulators.
|
|
|
|
|
|
XR81 Series
AMETEK's XR-Series All-welded Gauge and Seal offers customers a lower cost alternative to an individual gauge and diaphragm seal with the added benefit of a reduction in potential leaks. Our high quality, rugged SOLFRUNT® 1981 (SST internals) SOLFRUNT® 1986 (Monel® internals), gauge are mounted and welded onto our M&G XR Diaphragm
1500 Series
The Models 1530 and 1535 are feature ±1% of span accuracy and utilize 300 series stainless steel case. These heavy duty 2", 2-1/2" and 3-1/2" pressure gauges are specifically designed to withstand the corrosive atmospheres, such as salt air, sour gas, and other industrial gases
1900 Series SOLFRUNT®
SOLFRUNT gauge cases feature an integral wall between the measuring element and the window, and a pressure relieving back for increased safety. They are available in various styles, case materials, and mounting arrangements, and wetted parts are available in bronze, stainless steel, and MONEL®.
508/1409 Series Portable Test Gauges
U.S. Gauge 3" test gauges combine high accuracy, rugged construction and portability for a wide range of field and production testing applications. Instruments are available in chrome plated brass Series 508 and chrome plated ABS Series 1409 case designs
659 Series SOLFRUNT®
When safety is your top priority, AMETEK U.S. The Model 659 provides users with a solid-front and pressure-relieving back design in all stainless steel construction
|
|
Miniature pressure & vacuum gauges save space. Ideal for use with Beswick pressure & vacuum regulators, valves and fittings.
Material: Brass threads with plastic gauge dial and cover.
|
|
The WT is a Wally box replacement!
The WT version of the XP2i is designed to replicate the dimensions and pressure connections of the most common test gauges mounted in portable cases. It is a drop in replacement for the Wally box.
0.1% of reading accuracy
Batteries and digital communications are accessible from the front
Rugged "Wally Box" gauge can stand dropping
Optional Pressure datalogging capability
Fast delivery
Comes in 6" and 8.5" options
|
|
Square Gauges
Axial 1/8" ABS 0 - 2,5 40 x 40 360A770
Axial 1/8" ABS 0 - 16 40 x 40 360A774
Round Gauges
Axial 1/8" ABS 0 - 10 Diam. 25 880A114
Axial 1/4" ABS 0 - 16 Diam. 50 880A325
Gauges for panel mounting
Axial 1/8" Steel 0 - 10 Diam. 40 880C214
Axial 1/4" Steel 0 - 25 Diam. 63 880C426
Round Vacuum Gauges
Axial 1/8" ABS Vacuum Diam. 50 880A319
Axial 1/4" Steel Vacuum Diam. 63 880B429
|
|
Digital Manometers
Handheld Digital Manometer - Series 475-FM
Ranges from 1" w.c. to 150 psid (.25 kPa to 10.3 bar), ±0.5% Accuracy
Handheld Digital Manometer - Series 477-FM
Ranges from 20" w.c. to 150 psid (5 kPa to 1000 kPa), ±0.5% Accuracy
Inclined Manometers
Solid Plastic Portable Gage - Series 100
Ranges from 0.1 to 10" w.c., ±2% Accuracy
Solid Plastic Stationary Gage - Series 200/300
Ranges from 0.1 to 10 w.c., Accuracy as low as ±1%
Inclined Manometer Air Filter Gage - Model 250/Model 451
Ranges from 0.1 to 4" w.c., ±1% Accuracy
|
|
All Stainless Steel Pressure Gauges MAN-R
All St. St. Pressure Gauges with analogue output MAN-Z
Differential Pressure Gauge MAN-D
Digital Pressure Gauge MAN-SD/-LD
Digital Pressure Gauge PDC
Digital Pressure Gauge MAN-SF
Diaphragm Seal
Bourdon Tube Test Pressure Gauges MAN-F
Capsule Element Pressure Gauges MAN-K
Accessories for Pressure Gauges
Diaphragm Pressure Gauges MAN-P
Bourdon Tube Pressure Gauges MAN-R
Hand-Held Pressure Gauge HND-P
|
|
|
|
Pressure gauges, Pressure indicators
