|
|
|
Fided Gas Tube models are designed for maximum durability in extreme conditions . Typically rated at an astounding IP68 rating, these units are ready for any environment, and more critically - will last the test of time
|
|
|
Fixed Gas Tube models are designed for maximum durability in extreme conditions. Typically rated at an astounding IP68 rating these units are ready for any environment, and more critically-will last the test of time.
|
|
|
Raychem Gas Discharge Tubes (GDTs) are commonly used to help protect sensitive telecom equipment such as power lines, communication lines, signal lines and data transmission lines from damage caused by transient surge voltages that typically result from lightning strikes and equipment switching operations.
|
|
The MSB10 surge protector unit is designed to protect a single-phase input.
This compact plastic housing includes an electrical diagram basedd on thermally protected varistors and gas tube.
The unit is equipped with a led to indicate the right operation of the surge protection circuit.
The MSB10 is connected by wires in parallel with the network to be protected and could be mounted on wall or plate by self-adhesive tape.
|
|
The ISPRO C(R) 40 series of low cost, over voltage surge protective devices has been developed to protect against partial direct and indirect lightning discharges and is intended to provide protection in zones 1 – 2 as per IEC 62305.
It consists of a high performance varistor block with thermal disconnection device. The plug-in module/base design facilitates replacement of a failed module without the need to remove system wiring etc.
|
|
UNI series Features
This general purpose filter with single phase input is proposed in a very compact size. It can be mounted as desired or attacked directly on the device through biadhesive. The RC + Varistor is a particularly interesting serie because it allows to use the filter without considering the load. In fact it is enough to choose the operation voltage and the circuit RC + Varistor will do the suppressing action in the better way.
|
|
GE TRANQUELL® . Low Voltage Surge Protectors are designed for protection against either externally induced surges caused by lightning or utility switching, or internally generated switching surges caused by starting / stopping of compressors, air conditioners, elevators, and machine tools or fuse/circuit breaker operations.
Features and Benefits
* Energy Capability Options
* High Surge Current Capability
* Parallel and Series Connections
* Common Mode Protection Option
* UL-1449, Second Edition Recognized Component
Applications
* Facility Protection
* Data Processing
* Telecommunications
* Industrial Electronics
* Medical Electronics
* Electric Utility Systems
|
|
GE TRANQUELL® . Low Voltage Surge Protectors are designed for protection against either externally induced surges caused by lightning or utility switching, or internally generated switching surges caused by starting / stopping of compressors, air conditioners, elevators, and machine tools or fuse/circuit breaker operations.
Features and Benefits
- Energy Capability Options
- High Surge Current Capability
- Parallel and Series Connections
- Common Mode Protection Option
- UL-1449, Second Edition Recognized Component
Applications
- Facility Protection
- Data Processing
- Telecommunications
- Industrial Electronics
- Medical Electronics
- Electric Utility Systems
Product Scope
- Designed and tested in accordance with the ANSI/IEEE C62.41 and C62.45.
- Available voltages: 120 volts, 1 phase to 575 wye / 332 volt, 3 phase 4 wire.
- Suitable for both indoor and outdoor applications.
- Available in a NEMA 3R Enclosure.
- Inventory: Popular ratings are available from stock
|
|
|
Low Voltage Arresters provide protection for low voltage overhead lines, consumer in house supplies, distribution transformers and other systems. The MOV (Metal Oxide Varister) without series gap incorporated in the surge arrester reliably imposes low-value limits on surges caused by atmospheric overvoltages and switching transients, thus protection the insulation of the cumsumer side networks and equipment
|
|
GE TRANQUELL® surge arresters are designed to protect against overvoltages such as lightning or switching. Intermediate class arresters are used in electric utility and industrial substations to protect transformers and other substation equipment from lightning and switching surge generated overvoltages. Tranquell® polymer arresters provide both excellent protective characteristics and temporary overvoltage capability.
Features and Benefits
* High Fault Current Capability
* Excellent Protective Characteristics
* Light Weight
* High Durability
* Excellent Temporary Overvoltage and Surge Duty Capabilities
* Superior Contamination Performance
* Inventory: Popular ratings are available from stock
|
|
|
We offer an extensive range of products designed for use in distribution and transmission networks, qualified to IEC and ANSI standards. We supply polymeric and porcelain surge arresters for distribution and transmission networks. The Energy Division has 30 years of service experience of our composite products and in long-term service, our products have an outstanding record for reliability and performance, in the toughest environments and applications.
|
|
|
Replaceable Gast Tube models are designed for maximum durability in extreme conditions. Typically rated at an astounding IP68 rating these units are ready for any environment, and more critically - will last the test of time.
|
|
The DS215 Type 2 surge protectors are compact devices designed to protect single phase networks at the main switchboard.
DS215 are available for 230V or 120V AC network and the different distribution systems (TN, TT, IT).
Easy and fast maintenance
Compact single phase surge protector
In = 5 kA
Imax = 15 kA
Common mode or Common/Differential mode protection
Pluggable module
Remote signaling contact (option )
In compliance with NF EN 61643-411 and IEC 61643-1
|
|
DS40 Type 2 AC surge protectors are used mainly for primary protection of single and 3-phase networks at the main electrical panel.
This SPD is based on high energy varistor equipped with thermal disconnector and failure indicator.
The DS40 is available for a large range of AC voltages.
The DS40 is DIN rail compatible and is built with a plug-in module and a fixed base, which allows an easy and fast maintenance :
- Type 2 AC surge protector
- Discharge currents : In = 20 kA / Imax = 40 kA
- Pluggable module for each phase
- Remote signaling in option
- IEC 61643-11 and EN 61643-11 compliance
|
|
* Cost-effective protection for multicore signal lines
* Interface-specific types, e.g. TTY, RS 485
* Types for d.c. power supply systems
|
|
Fixed surge arrester Type 2
Description
. Maximum current discharge Imax:
- Quick PF: 10kA
- PF: 8kA, 20kA, 40kA, 65kA
. Number of pole:
- Quick PF: 1P+N, 3P+N
- PF: 1P,1P+N, 2P, 3P, 3P+N, 4P
. Protection on Imax overrun:
- Quick PF: by built-in disconnection circuit breaker
- PF: by external disconnection circuit breaker (C curve, 20 to 50A circuit breaker)
. Built-in thermal deconnection of end of life
. Earthing layout: TT, TN-S, TN-C
. Coordination and selectivity with selective version, "si" type earth leakage protection
. Built-in local and remote reporting ("r" version) of operating status.
. Compliance with standards : IEC 61643-1 class 2 test, EN 61643-11 Type 2
|
|
GE TRANQUELL® . Secondary arrester is specifically designed to protect utility, agricultural, and industrial installations and equipment in the 120-600 volt range from overvoltages caused by lightning discharges. It is available for both single- and three- phase applications.
Features and Benefits
* Dependable Protection
* Provides All weather Protection
|
|
Our Helio Box junction box dedicated to photovoltaic applications is fitted with Surge Trap® protective devices.
Surge Trap® are designed with a TPMOV™ as a core. TPMOV™ is a metal oxide varistor with a built-in and patented self-disconnecting system. Surge Trap® provide an optimized safety to photovoltaic equipment and installations. Indeed disconnecting via a fuse in series is not possible due to too low fault current and via a breaker let the user without any protection against overvoltages.
Before the end of life of the Surge Trap, the result of disconnecting is visible in front via an indicator.
|
|
|
4-25 Pair Modular Surge Protection for Analog, Digital, CAT5 / 5E / 6 / T-1 / ISDN, Paging, PTZ Cameras, Inputs and Outputs Include RJ-11, RJ-45, RJ-21X, 110, BNC, Screw Terminals, Features Unlimited Modular Mounting Capability, UL Listed
|
|
* Complete prewired unit, consisting of a base part and plug-in protection modules
* Energy coordination within the Red/Line product family
* High discharge capacity due to powerful zinc oxide varistors/spark gaps
* High reliability due to ''Thermo Dynamic Control'' SPD monitoring device
* Multifunctional terminals for connecting conductors and busbars
* Easy replacement of protection modules due to module locking system with release button
* Tested for vibration- and shock-proofness according to EN 60068-2
|
|
SecureLinx -Surge Protection for Security Products
Premiere Surge Protection for all your Security, CCTV, Access Control and Alarm applications
|
|
Weidmüller develops, produces and sells high-quality overvoltage protection and has established this field as its core line of business over the years. Our objective is always first and foremost to fulfil our customers’ application requirements. With our know-how, we have developed a programme which combines reliable overvoltage protection with affordable solutions: in low-voltage power supplies, I&C technology, telecommunication and industrial data processing.
|
|
| ... products without technical information |
| |
|
|
Surge Protection Devices : Surge Arresters type 2
