|
|
Rotary indexing ring TR-A
Product information
The rotary indexing rings of our TR-A series have the following advantages:
* Huge centre opening
* Drive curve very far outwards, ensuring
* high precision and dynamics
* Very flat design
|
|
Description
The rotary indexing rings of the NR series have the following special features:
* High indexing accuracy as locking feature is positioned on the far outside
* Large centre hole
* Flat design
* High dynamics as drive is directly outside on the rotating ring
* Simple control units - identical to control of the familiar NC types
* Rotating ring, bored to customer's drawing specifications, mandatory element of scope of supply
|
|
The heavy-duty series "IR" Indexing Rotary Tables are mechanical cylindrical cam units that transform the uniform rotary input motion into an indexing motion of the dial plate.
They are manufactured in two new standard versions 1001 and 1301 (mm) plate diameters and with the possibility of mounting vertical and horizontal axis.
They allow transmitting torque to 49.850 (Nm).
The standard number of stations ranges from 2 to 24 and the cam indexing periods are 270°, 310° and 330°.
|
|
- The heavy-duty series "IR" Indexing Rotary Tables are mechanical cylindrical cam units that transform the uniform rotary input motion into an indexing motion of the dial plate.
They are manufactured in two new standard versions 1001 and 1301 (mm) plate diameters and with the possibility of mounting vertical and horizontal axis.
They allow torque transmission up to 49.850 (Nm).
The standard number of stations ranges from 2 to 24 and the cam indexing periods are 270°, 310° and 330°.
- The biggest "IR" Indexing tables that we manufacture are made with cylindrical cam units of the series IR1601, IR1801, IR2001, that can reach a plate diameter of 2 (m) and allow transmitting torque up to 180.000 (Nm).
The standard number of stations of these tables, of which load is supported by a bearing of large dimension ranges from 18 to 34 and cam indexing periods are 300.
|
|
|
|
|
|
ROTARY TABLES & INDEXERS
Haas rotary tables and indexers are divided into three main categories. Each category - INDEXERS , ROTARY TABLES and TRUNNION TABLES - contains information about multiple products, special configurations and applications.
These three Rotary categories are organized into multiple levels of information. Advancing from this main page, you will find a list of the major products we offer in each category. The page for each individual product then contains information about particular specifications, applications, exceptions and special considerations.
The Haas Way
Every Haas rotary product can be used on both Haas CNC machines and other brands. We accomplish this with our servo control units.
5C Collet INDEXERS
Includes multi-head, tilting multi-axis and specialty models.
PLATTER-STYLE ROTARY TABLE
Includes platters from 160 mm to 600 mm, dual-spindle models, special models with compact housings and tilting multi-axis models
TRUNNION TABLES
Dual-axis trunnion rotary solutions - in three sizes.
|
|
KMT Rundschaltteller
Presses and Rotary indexing tables
Rotary indexing table
Typ 512 ø120
Application
For non-chip machining
Special versions:
For machine-cutting
processing
Size
ca. 40 mm
Division
Standard 6, 8, 12 and 24
Repetitive accuracy
+/- 0.03 mm
of a switch position
Dividing accuracy
+/- 0.05 mm
Direction of rotation
Clockwise (right)
Anti-clockwise (left -
only Div. 8, 12, 24)
Acknowledgement
With inductive
proximity switch
Load
Axial up to 5 kN
Capacity
max. 3 kg
Switching time
Up to 140 cycles / min
Installation
instructions
One-way restrictors should
be provided for supply
and discharge air
Dead load
ca. 5 kg
Stroke cylinder
Piston - Ø 20
End position damping
R1/8'' connections
Dimension and design
details subject to change!
|
|
MCPI proposes a whole range of pneumatic plates indexers, with indexing by conical fingers or Hirth teeth.
These apparatuses are available from 2 up to 24 stops per turn
These apparatuses are delivered with detectors integrated end of the road and shock absorber.
These very compact plates are appropriate for the applications of machining.
For more details, to see cards pdf.
|
|
Motion Index Drives series of Rotary Index Tables encompasses a large range of sizes. Our Rotary Index Tables convert a uniform input motion into a intermittent output motion. The intermittent output motion is transmitted through our induction-hardened, precision-machined barrel cam.
Our design and construction results in a positive fit and zero backlash positioning of the top dial.
Every model in our Rotary Index Table range is available in options that would be suitable for the following environments
-Pharmaceutical
-Medical
-Dairy
-Meat Packaging and Processing
-Cosmetic
-Electronic Industry
-Other clean room environments
We also offer waterproof rotary index tables fro extremely wet and high pressured wash down environments
|
|
|
|
|
|
Peiseler tables are available as NC units with backlash adjustable split worm drive, direct drive, or indexing units positioning over Hirth gears. The axis of rotation is vertical and the faceplate is horizontal. The high quality Meehanite-casting, distortion free axis clamping, manifolds with hardened steel shaft running in bronze bushings, as well as the appropriate selection from several types of high grade bearings, assures the highest possible precision. Diverse gear ratios or gear reducers allow for the optimal adaptation to any load condition. The use of very accurate measuring systems in combination with a high mechanical accuracy, results in only a few seconds of arc positioning deviation. The robust design enables simultaneous four axis machining even under heavy machining load. Special face plates, pallet-receivers, collets, and large through holes are available or can be designed to meet customer requirements.
Face plate diameters from 100 to 3,500 mm.
Adaptive to all drives.
Please request our comprehensive catalog.
|
|
|
can be used in: assembly industry, testing, welding, printing, pressing, automotive, micro electronics, food industry, medicine technics, cosmetics
|
|
|
|
|
|
Mode of Operation:
The rotary index table transforms a constant input drive motion into an intermittent output drive motion. The intermittent drive motion occurs by means of an inductively hardened and fine-milled barrel cam. The use of mathematical laws of motion guarantees a soft, shockproof and jerk-free movement that has been optimally designed for its intended purpose. The designed assembly allows for accurate and secure mounting to the output flange which is also free of play.
No additional adjustment of the output flange is necessary. This can lead to mechanical over tightening and thus the rotary index table being destroyed in the long term.
The power is provided either by means of a three-phase brake motor via worm drive or by means of a chain-wheel or belt wheel on the drive shaft of the rotary index table. This is firmly connected to the barrel cam, without any further internal gear sets, and it turns the cam followers and subsequently the output flange. The output flange is mounted within a wire bearing assembly, stiff and free of play (Within steel rings – not in the casting). The shaft seals appropriate for each size seal the rotary table off inside and out.
|
|
Rotary indexing table NC
Description
Our rotary indexing tables from the NC-Tseries permit dynamic and precise positioning of heavy loads at freely selectable angles.
Software:
* Can be taught up to 128 positions
* Up to 10 operating programs possible
* Simple access to all axis parameters
* Software cam can be defined
* Diagnosis options and remote maintenance
* Error history
* Freely selectable language
|
|
Description
Our rotary indexing tables from the NC-Tseries permit dynamic and precise positioning of heavy loads at freely selectable angles.
Software:
* Can be taught up to 128 positions
* Up to 10 operating programs possible
* Simple access to all axis parameters
* Software cam can be defined
* Diagnosis options and remote maintenance
* Error history
* Freely selectable language
|
|
Torque motor consist of a fixed primary coil unit (stator or primary part)
and rotated magnet ring (rotor or secondary part).
Torque table consist of synchronous motor with built-in radial-axial (thrust)
bearing, incremental sensor and hydraulic brake (optional)
|
|
Rotary Tables
Rotary Products help decrease setup time and increase productivity.
MAG Fadal Rotary Products provide the ability to perform four and five axis positioning and simultaneous four and five axis machining. Since you can machine multiple sides without refixturing, part handling is reduced. This increases part accuracy and reduces part run times.
MAG Fadal offers a full line of precision tough, reliable rotary products. These products automatically rotate the part into position for machining operations.
Put them to work indexing or machining with full-interpolated simultaneous 4th and 5th axis moves.
MAG Fadal assures a harmonious, totally integrated relationship between these products and the machines they are functioning with. The rotary tables feature rugged construction and reliability that will increase performance and accuracy.
4th and 5th axis rotary tables are a valuable option, maximizing the performance of your Fadal VMC.
|
|
Rotary Dividing Tables and A-Axes
for Sinking and Wire EDM
The HIRSCHMANN high precision NC controlled Rotary Dividing Tables and A-Axes gives the possibility to turn or to position the workpieces in sinking or wire EDM.
They are in horizontal or vertical position usable.
Features:
- Smallest step 0,001 mm
- Moment of inertia until 80000 kgcm2
- Workpiece weight until 800 kg
- Compact size
|
|
FIBROTOR® indexing tables
- with worm roller drive for optimised rapid switching operations. They are used in welding and assembly
- operations, as a magazine table and for handling and feeding applications in automated processes.
- FIBROTOR® NC indexing tables have a worm roller drive of constant pitch. Any size of divisions are
- possible when used in conjunction with NC control.
|
|
FIBROTAKT® indexing tables
have been designed for precision divisions and high working loads. Interlocking in the FIBRO face gear
ensures maximum precision and rigidity long term. There are different versions and drive types to suit
every application. Whatever the assembly weight, the built-in FIBROTAKT® indexing table for phased
indexing machines combines minimum switching times with maximum precision and rigidity. It features
a non-lifting indexing table, gear drive and easy access from below.
|
|
|
Think of the BNP A-200 and A-205 indexing turntable machines as painters' canvasses, ready to be transformed into your vision of an automated blast system. The basic BNP A-200 comes with six rotating satellites in a four-feet by four-feet by five-feet tall cabinet. You can select computer controls, extra satellites and blast guns, suction or pressure blast system, oscillating arms, and other options to create the perfect automated cabinet for your application.
|
|
Indexing machine bases SR/SK
Description
Our electromechanical indexing machine bases offer you the following advantages:
* Time savings due to supply of complete basic machine with special machining within approx. 6 weeks
* Cost savings due to series production at our works
* Rotating and stationary rotary indexing table plates bored to your specifications upon request
* High degree of accuracy, as the additional indexing plate and all drilling work is performed at our works with the same clamping values and you are supplied a completely measured and approved machine.
* High degree of quality, upon request the aluminium plates are anodised and the steel plates chemically nickel-plated.
* Flexibility with adaptation to suit your needs
* Base body of robust welded construction
* Integrated circuit cabinets and protective housings are available for the square indexing machine base of the SK series.
|
|
Rotating Spindles
The combination of erosion with high-speed rotation is the key to highest surface quality of rotationally symmetric pieces and will additionally reduce the production time.
Features:
- up to 1500 rpm
- for sinking and wire edm
- complied sealed housing
- compact size
|
|
T1-407410 focus
* Spindle divider HSK-A63/Ø70
* Gear train divider 45:1
* Gear train swiveller 45:1
* Swivelling range 120°
* Swiveller system: left
* Drive position: top right
* Drive position: right
* Automatic spindle clamping (both axes and counter bearing monitored, clamped/unclamped)
* MAVILOR AC motor 100% SIEMENS compatible
* Cabled ready to be plugged in, HARTING
* Pressure regulator with water separator
|
|
T1-420420 focus
* Spindle divider HSK-A63/KK5
* Gear train divider 60:1
* Gear train swiveller 60:1
* Swivelling range 90°
* Swiveller system: left
* Drive position: bottom right
* Drive position: right
* Automatic spindle clamping (both axes and counter bearing monitored, clamped/unclamped)
* MAVILOR AC motor 100% SIEMENS compatible
* Cabled ready to be plugged in, HARTING
* Pressure regulator with water separator
|
|
The series "IR" Indexing Rotary Tables are mechanical cylindrical cam units that transform the uniform rotary input motion into an indexing motion of the dial plate.
They are manufactured in six different versions from 185 to 620 (mm) plate diameters that allow transmitting torque from 40 to 12.500 (Nm). The standard number of stations ranges from 2 to 16 and the cam indexing periods are 270° - 310° and 330°.
|
|
|
N/C controlled turntables, or shifting turntables. An innovation made by Demmeler which nowadays is used at a large scale by well - known manufacturers of wind - power wheels. The hydrostatic systems stand out due to very precise truth both of running and of recurrency, as well as due to the tables' load - bearing capacity of up to 250 tons. Due to their modular, they can be designed in a broad variety of configurations - according to the respective customer requirement.
|
|
|
Complete with ring gear, worm gear, bearings and orbit motor. Thanks to its high performances, the rotary table is a compact, simple and economical solution for the rotation drive of small cranes and aerial platforms.
|
|
Rotary tables RT1 300/400:
- Rotary table with worm drive
Rotary table RT2A 100/150/200:
- high concentricity and axial run-out accuracy
- precision rolling bearing
- with worm drive
- completely sealed
|
|
Count RDH-M
Drive with Harmonic gears drive®
bearing with great resistance and load capacity
no play with the inversion, great torsion strength
Report/ratio of reduction 1:51 or 1:101
Protection IP 65
With the choice with or without central boring
Adaptable engines: engine step by step with servo coder or cd.
Precision < 1 arcmin
Repeatability <± 6 arcsec
Without maintenance
Options:
other engines
without engine with adaptation
on different request report/ratio of reduction
|
|
|
|
Rotary indexing tables, Magnetic plates
