The MAXIMO panel formwork succeeds in minimizing imperfections in the concrete finish and creates a neat joint and tie arrangement.
By means of a newly developed conical tie system, the wall formwork system does not require any spacer tubes and work takes place from only one side. This means maximum reductions in expense and considerable savings of time and resources.
Apart ...
Flexible and cost-effective VARIOKIT formwork carriage ...
For perfect concrete surfaces
Manufactured according to the highest quality standards, the SRS circular column formwork guarantees a perfect concrete surface finish.
Easy to clean:
The ECC powder coating minimises concrete adhesion and reduces cleaning costs.
Cross-sections:
Column ...
With its low weight, Alu-Framax Xlife brings all the benefits of Framax Xlife framed formwork to craneless jobsites as well - also seamlessly combined with Framax Xlife, of course.
Extra light and super-strong
with ...
The Guided climbing formwork Xclimb 60 is a system in which the entire unit is structure-guided at all times, even while being repositioned. Even in windy conditions, an entire screen unit is repositioned safely and easily in one single lift.
The ultimate in flexibility thanks to the innovative, modular system
Benefit ...
Climbing formwork MF240 permits controlled, regular working cycles on all tall structures. It is extremely easy to set up, and can be tailored to meet a wide range of different requirements.
High flexibility
meaning optimum adaptation to any construction ...
The Triple Genius
The light-weight, aluminium wall formwork system AluFix is the leading equipment for quality-conscious contractors.
AluFix it‘s atriple genius because it‘s
* lightweight and crane-independent
* flexible by offering 3 heights (132 ...
Light-weight and versatil
AluStar is a versatile, lightweight wall formwork system made of aluminium. It is the crane-independent component in the AluStar / StarTec family. Its largest panel ...
Round & Tall
Circular columns are a prominent architectural feature in structural and civil engineering projects. Since concrete cosmetics are ...
Trapezoidal Girder Formwork TTR/TTS with plywood or with steel face (60 kN/m²-80 kN/m² according DIN 18218)
Adjustable circular formwork for sewage plants, tank constructions, adventure baths, towers, stairwells, garage entrances, walls for gardening and landscaping
* Continously adjustable from 2 m to 5 m and from 5 m to infinite
* Only 0.28 to 0.55 holes ...
It supports the efficiency and cost effectiveness of climbing systems in adjusting flexibly to the structure geometry and in permitting larger formwork units.
- Can be adjusted up to ...
Slab formwork ideally suited for construction sites without crane availability and where aluminium is not the material of choice
- Can be combined with Modular panels
- Beam solution with Modular panels workable
- Combination ...
INFRA-KIT | Bridge & cut-and-cover tunnel construction
To reduce the design and assembly effort in bridge building and cut-and-cover tunnel construction, Harsco Infrastructure developed the modular INFRA-KIT system.
The user-friendly INFRA-KIT system is based on the tried-and-tested load frame prop (up to 210 kN of loading per prop) and main beams with wide-ranging applications.
A ...
TOPMAX | The world's first steel frame table form
TOPMAX® from Harsco Infrastructure has been especially developed for the efficient shuttering of large soffit surfaces with regular ground plans and repetitive geometries. Thanks to its small number of components, preassembly is straightforward, ...
TOPEC | Cost-effective modular slab formwork
TOPEC® from Harsco Infrastructure makes the shuttering and stripping of slabs much faster and demonstrably more economical than conventional slab formwork systems. This is because the TOPEC system has just two basic ...
Megashor is a unique ultra high modular propping system, designed for axial loads of up to 1000kN. However, its real strength lies in its versatility. From heavy ...
RMD Kwikform has provided unique special formwork solutions for a wide spectrum of applications, ...
Reflex is a robust, galvanised circular wall formwork system, designed to withstand concrete pressures up to 60kN/m2. It can be easily adjusted for re-use without modification ...
The metal pillars of Circular Series DERCONS utilizan para the realización ...
Metallic formwork construction DERCONS is used, of a modular ...
The Metallic Pillars of Slight Series DERCONS are used for the accomplishment ...
Micro Faced Plywood Panel
These ...
The Standard Tabla Shoring System is a unique system erected from the working floor up to a height of 12’/3658. With Prop Extension the system can be erected up to a height of 16’/4877. For higher floors see the Tabla Pioneer System on page 24. Tabla Shoring can accommodate drop bands, drop heads ...
TAblA Gate Braces are used for starting erection ...
ADJUSTABLE MOULDS FOR PREFABRICATION PROJECTS:
Moulds to manufacture :
- Frontage precast panels
- ...
Flying fastener AVRI.
Flying fastener for ...
Coffrage CTR 3010
SAFETY All the accessories of safety are integrated into the panel including protection front face. Extensible railing for an optimal ...
# Long service life
All panels have integrated corner castings.
# Stable
Multi-cell frame profile for high torsional stiffness.
# Strong
Permissible concrete pressure 60 kN/m²
# Functional
Multifunctional ...
* NOEalu XL
Panel size 2.00x2.75 m
= 5.50 m² panel area.
NOEalu L develops along with your projects, making it unnecessary to turn to another, unfamiliar formwork system for large projects.
...
TITAN Column Forms
Titan SF100 column clamp system
Säulenformen TITANColumn clamps are assembled with 4 no. bolted corners and 4 no. hinged for ease of striking on a typical 3.0m high
column.
'L' sheped column shutters ...
TITAN Megashore - The world's leading falsework system
Alu-Schalungsgerüst TITAN
Fast and versatile
Lightweight, yet exceptionally strong
The TITAN support system is recognised as the leading product
in its field by many professionals in
the construction and civil engineering industries.
Comprising ...
Aluminum beams TITAN T
The aluminum beams TITAN T are used for the formwork of concrete slabs and for the proping of prédalles.
With these beams, you exploit to the maximum the advantages of aluminum.
They are light and resistant.
Advantages ...
Tritec column formwork
TRITEC® Column Panels are able to form and concrete ...
GHI-Formwork beams
Solid Flanges, Rounded Beam Ends
* GHI-P20 length:: 0,60m
* GHI-P20 length:: 1,20m
* GHI-P20 length:: 2,45m
...
Props
Hot-dip galvanised, steel props 20kN
* GHI-Prop 20-250, extension length 1,46m-2,50m
* GHI-Prop 20-300, ...
