|
|
- Isolation active and passive
- Isolation equivalent frequency
- Isolation low frequency
- Automatic correction of the professional level of precision 100 µ m
- Unparalleled Performance
- Small
- Acoustic Performance
- Can operate without air (SLM)
- Excellent stability
- Range includes: materials, mechanical control system with a system with electronic control, tables and work plans. |
|
We manufacture air springs in an area of 4000 sqm.
We have approximately 200 sorts of products for trucks, buses and industrial trailers and we always increase our product range by studying on new models.
We continously increase our capacity depending on clients intensive interest and demand of the market.
Our aim is to reach 360.000 pieces for annual capacity in 2007.
We produce the air springs with high quality standarts by test applications and interval professional controls in professional production processes from raw material to end product.
We guarantee definitely our products in accorance with methods from the independence of production faults and specified properties .
We use special professional rubber and professional fabric for production of air springs which has improved professional chemical attribute .
As a result of this we can say that we have technical knowledge and equipment for the best acceptance standarts of air professional spring production.
Our products have not difference of quality from the OEM brands such as ; Contitech, Firestone, Goodyear..etc. However the important difference is our prices much more competitive than the others.
Our main principles is to have competative prices, high quality, honesty and long-term business opportunity for our customers.
|
|
The NV150 air-springs are the pneumatic isolators for the cplusw damping tables and are inserted into their base frame.
But as an OEM-product the NV150 can be used in many ways. Because of an upper stopper of the piston the design offers a maximum safety against an accidentally compression overload.
A permanent supply of compressed air is necessary for operation as well as a compression or rather a height controller for setting up the working height in between the levelling range of +/- 4mm The resonance frequency is about 1,7 Hz in horizontal directions and in vertical direction under 2,5 Hz.
CplusW offers support for system integration into customer products or special applications. Sets composed of three, four or even more NV150 air-springs will be delivered with the necessary number of height professional controllers HR2.
NV150 systems do not need any special maintanance after the initial setup. |
|
NV 50 is an isolator for integration into professional platforms with attachment options on one side wall or at the bottom. The is fixed with the centrical load rod. In consequence of the prismatic basic shape these isolators can be integrated in substructures of vibration-sensitive instruments and are ideal to use as OEM-elements.
If an installation in the inside of the instrument is not possible the industrial dampers can be masked with an optional available blind made of polished stainless steel. The NV 50 hold brilliant isolation features in the lower frequency range despite the low contruction volume of about one liter.
The resonance frequency lies horizontal under 2 Hz and vertical at 2 Hz. The levelling range is +/- 3mm and can be set up with the height professional controllers HR2. A permanent supply of compressed-air is necessary. |
|
NV800 air springs are ideal for supporting high sensitive experiments, machines and equipment.
These isolators can be used in a wide range of load because of their unique design.
The characteristic attributes remain in narrow limits and do not underlie a strong load dependence like comparable products do. Consequently the NV800 are ideal for storing equipment with asymmetric load distribution. In addition the broad load range serves for future upgrades which is common in scientific equipment.
The use of an extreme thin membrane makes the NV800 behave almost like an ideal air professional spring in the vertical direction. The resonance frequency is about 1,5 Hz. In professional case of horizontal disturbances an inverse pendulum which is installed inside the chamber offers excellent isolation features with a resonance frequency as low as 1,3 Hz.
NV800 air-springs are inherently safe and designed for lowmaintenance. Integrated limit stops prevent any overload condition. After having installed it once no more adjustments are necessary.
A complete set contains three or rather four NV800 air-springs as well as the needed number of height professional controllers HR2. In the normal case not more than three height controllers HR2 are needed for additional NV800 isolators. |
|
Shock & Antivibration machines professional feet allowing the following performances:
Insulation of the shocks and vibrations
Integrated levelling
Improve machine stability
Anchoring no require
Load by feet 10 to 10.000 kg
Broad range for all the aplications |
|
ELESA vibration-damping levelling elements have been designed to damp vibrations, shocks and noise produced by moving bodies or non-balanced vibrating masses of equipment and machines which can cause:
- malfunction and reduction of the machine lifespan and/or of the adjacent ones
- damages at men’s health
- noise.
LW.A are made up of three main elements: zinc-plated steel base with natural rubber disk, zinc-plated steel levelling disk and threaded stem to allow an easy and precise levelling of the machine.
Vibration-damping levelling elements are available in the following diameters: 80 - 120 - 160 and 200 mm. |
|
| The line is particularly indicated to solve vibration problems. According to the sectors of use Martin gives the possibility to choose the right solutions among plastic, steel or stainless steel component. Applications: injection industrial presses , system tools, typographic machines, industrial vibrators a.s.o. |
|
Range of Applications:
- processing centres
- transfer machines
- industrial industrial robots
- special purpose machines
- plant construction
Characteristics:
- large adjustable range
- exact leveling by using fine thread
- charging from 500 da/N up to 4.000 da/N
- with or without vibration isolation
- for free-standing or srew-on type machine assembly
- cost-efficient assembly method |
|
The OSM-Series mount is designed for use on machinery that does not require fastening to the floor and where stringent demands are imposed on effective vibration damping and the reduction of troublesome noise emitted from machinery and equipment.
It has been designed with the aid of FEM analysis, which prevents
fatigue from fast working cycle times and strong lateral forces in heavy machinery.
The reinforced leveling bolt specifications support cup distributes machine loads to
the support points within the mount. The leveling element provides
direct and reliable machine mounting to suit most installation needs.
Vertical as well as horizontal forces are dampened out by
the integral nitrile pad, which also provides professional chemical resistance
to most fluids.
A tried and tested design with good leveling characteristics
makes the OSM-Series the natural choice for the majority of
machine types used in industry. |
|
| A natural rubber disk that is completely enclosed in a steel pot allows tilting movements around any horizontal axis due to its capacity to deform. |
|
| Trelleborg Bakker specializes in designing and producing techical rubber products including Elastomeric Bearings manufacturers. Rubber bearings are flexible support points used in the construction of viaducts and bridges. |
|
While hot forming unit tools (hammers, professional screw industrial presses) use high kinetic energy for the metal forming, where part of this energy is dissipated into the ground causing there rather high vibration professional levels, however, in case of the cold forming process it is the sudden release of the stresses - built up in the press frame during the pressing operation - when cutting through the material (blanking).
In both professional cases GERB can provide special Professional spring-Viscodamper® combinations, which allow today direct spring support of the equipment whereas in the past quite massive foundations were necessary. |
|
| Smaller than traditional professional wire professional rope isolators, these unique isolators provide unsurpassed multi-axis shock / vibration isolation with maximum reliability where sway space is a premium. Compact WRI are unaffected by temperature extremes and professional chemical exposure. Featuring a patented crimping pattern, they are ideal for lightweight applications such as disk drives, sensitive mobile electronics, medical equipment, and small pumps / motors. |
|
Professional rails elastic
Shocks multi-directional
Supports professional engines
Supports big race engines
Fixing muffling
Washers
Supports soles
Supports universal
Montage sécuritif
Specific development |
|
The design of the RADIAFLEX mount gives the following basic
characteristics:
- Radial elasticity greater than axial elasticity.
- The rubber works in:
- compression (axial).
- shear (radial).
- compression/shear according to the fixing method.
Advantages:
- Simple to fix.
- Simple and economical.
- Extensive range:
- 13 professional stud diameters.
- Several heights for each diameter.
- 5 methods of fixing. |
|
EH™
Type EH™ mountings produced in natural rubber and neoprene are designed to achieve effective vibration isolation on professional engines, operator cabins other ancillary units.
Typical applications are, Off-highway equipment, Military vehicles, Transport machinery, Industrial mobile machinery. |
|
Properties:
- Flexible mountings are components which exhibit both flexibility and damping, at the same time and to varying degrees.
- Flexibility is the ability of the mounting to deform and recover, with an amplitude approximately proportional to the load.
- Damping is a braking force the most important effect of which is the reduction of oscillations. |
|
|
|
Vibration dampers
