Press accessories: Tools, Handling...

100 companies | 269 products
Filters

The Schuler is a leader in its class for automation and transfer presses and the system uses an established blanket loading and destacking methods. Schuler...

press transfer system - max. 8 100 x 3 100 mm | AT series

This is one of the most advanced modular transfer generation systems made available by Schuler, offering high performance for presses used in sheet metal forming. The item comes with a design in three basic...

press transfer system - max. 8 100 x 3 100 mm | AT series

The Die turnover device by Schuler is ideal for ergonomic rework on the upper die in the tryout phase which operates by rotating the die by 180 degrees....

forging die - TFP, UFP series

Tailored to provide the distinct needs of different product variations, Schulers Open die forging system is accessible in both push-down and pull-pull down design to fit the consumers...

forging die - TFP, UFP series

SCHULER die design machines offer precise forging of die and die components and parts. Forging dies are today configured for various...

{{productDetail[13229]}}
forging die - TFP, UFP series

Conventional or punching dies is an equipment designed for...

forging die - TFP, UFP series

Fagor Arrasate Progressive dies are designed, manufactured, and tested with a high level of...

forging die - TFP, UFP series

Fagor Arrasate transfer dies are designed, manufactured, and tested with a high level...

forging die - TFP, UFP series

The swinging dies are a group of dies that were manufactured by Fagor Arrasate. The swinging...

{{productDetail[68673]}}
press transfer system - max. 400 mm | TCS series

The TCS Servo Transfer Unit is a machine manufactured by Aida. Compared with the previous mechanically driven TCV model,...

press transfer system - 200 - 600 mm | NCAH-III

The AIDA's Multipacer NCAH-III is a stamping press automation system which generates a space-saving press transfer...

press transfer system - 900 - 1 500 mm | A-8II series

AIDA Inter Press Transfer Robot, A-8II plays a key role in configuration of the press line structure, which is an integral step in increasing productivity.

A-8II inter press transfer robot gives...

press transfer system - 700 - 3 000 mm | NCTHL series

The Linepacer NCTHL Inter Press Transfer from AIDA has a two axis servo motor for supporting...

press transfer system - 700 - 3 000 mm | NCTHL series

The AIDA's electronic press transfer feed is integrated with four fitting of "Overhead Type" stand-alone modules which are positioned in every column....

{{productDetail[5598]}}
press transfer system - 700 - 3 000 mm | NCTHL series

The range of our products comprise die sets designed according to DIN or ISO and business principles constructed...

press transfer system - 700 - 3 000 mm | NCTHL series

The manufacturer can supply aluminum plates in standard dimensions, compatible with the ISO 6753-1 standard, but special dimensions can also be made...

press transfer system - 700 - 3 000 mm | NCTHL series

These precision-made parts include punches in various materials with socket or countersunk heads which comply with DIN/ISO standards or are built to customers' specifications, as well as ball-lock punches and dies.

The constant monitoring of quality which characterizes FIBRO's...

press transfer system - 700 - 3 000 mm | NCTHL series

The FIBRO standard parts for mold making are an extension of FIBRO assortment of reliable...

{{productDetail[5302]}}
joining module with force sensor - 1 - 50 kN | UFM COMPACT series

The electro mechanical assembly units of the COMPACT SERIES are characterised by their slim and weight reduced design. It is suitable for assembling operations using several...

joining module with force sensor - 1 - 50 kN | UFM COMPACT series

The Single Workstation is a stand-alone component which features an integrated assembly press....

{{productDetail[20081]}}
press transfer system - GT-Pressen

Automatic-Systeme Dreher leads the blanks or pre-formed components at the right time and in a suitable position towards...

press transfer system - FlexMotion

Dreher Automation's FlexMotion is a double-sided walking beam transfer system. This system is designed and manufactured with a modular design that delivers...

{{productDetail[40794]}}
press transfer system - FlexMotion

Universal manufacturing tool
for large cylindrical products
This innovative universal tool has been designed for all large cylindrical products, specifically motor housings...

{{productDetail[9212]}}
press transfer system - FlexMotion

This task starts with the pro­vi­sion of ad­vice to the cus­tomer. The roller spe­cial­ists at Dreis­tern pro­vide sup­port even dur­ing prod­uct de­vel­op­ment. They rec­om­mend suit­able ma­te­ri­als,...

{{productDetail[16581]}}
press transfer system - FlexMotion

EPMO has been specialising in the conception and production of compression
tools...

press transfer system - FlexMotion

In order to increase productivity, it may be judicious to...

press transfer system - FlexMotion

Although we have above all been specialists in the pharmaceutical domain, we have also...

press transfer system - FlexMotion

Our forming tools are made from high quality European...

{{productDetail[60334]}}
press transfer system - FlexMotion

KALLER Flange stripper unit (or lifter) is to be used in flanging dies for lifting up the part after flanging operations. Today almost every tool maker designs and makes his own stripper units which is fairly costly.
Therfore...

{{productDetail[15601]}}
press brake tool - 400 - 3 200 kN

LVD provides a full range of standard press brake tooling to accommodate machines from 400 to 3200 kN (40 to 360 tons). A variety of single, multiple and adjustable V-dies are also available.

Our exclusive STONE® radius (LVD patented)...

{{productDetail[16531]}}
centering wear slide rail - CPGPD

Combi-die sets with down-mounted columns Combi-die sets with aerial-mounted...

die set for press / cast iron - SN

- Bronze slideway

-...

{{productDetail[15598]}}
die set for press / cast iron - SN

Evacuation systems and robots developed specially for...

die set for press / cast iron - SN

Various types of manual and fully automatic tool...

{{productDetail[18748]}}
punching die quick-change - Ultra TEC®

The Mate's Ultra® Precision Tooling System is a thick turret punching system that improves tool...

punching die quick-change - Ultra XT™

Mates Ultra XT™ Precision Tooling System is a thick turret punching system which increases tool performance and flexibility,...

punching die - 1/2

The Original Style Thick Turret is used to configure punch presses. It is equipped with a fully-OEM compatible tools....

punch - Rapidset

These Rapidset™ adjustable thick turret canisters from Mate Precision Tooling are suitable for use in original style and AMX™ tooling systems. These devices are...

punch - MXC™

The Punch MXC™ is manufactured by Mate Precision Tooling. The product features a Mate's MXC tooling framework...

{{productDetail[55691]}}
punch - MXC™

The standard program. Compact, long service life, reliable and repetitive accuracy. Various lengths are available. Suitable for single and multipoint...

punch - MXC™

Flat die

In narrow conditions ideally suitable, a combination with flanged or rectangular punchs is possible. With this extremely small tool you reach almost every corner of the piecepart, it allows small flange widths and a quick and simple exchange.
It...

{{productDetail[7212]}}
wire, strip, cable, wire rope, tube and profile roller guide - GS

Uhing® guide system GS transmits the traversing movement of the traversing unit to the guide roller and the material to be wound. Additional modules...

{{productDetail[7222]}}
punching die - Trumpf® GL

Our Trumpf style standard "GL" tooling is manufactured with high-speed tool steel for greater precision and all...

punching die - EHRT

Wilson Tool offers a comprehensive range of punches and dies for machines...

punching die - MC-40

Wilson Tool offers a range of punches and dies for MC-40 machines...

punching die - MC-40

Wilson Tool offers comprehensive standard tooling solutions for European style, American Precision®, WT Style Precision...

hydraulic clamping system / for press brake tooling - PowerExpress®

Hydraulic clamping systems are the most efficient style of clamping. Fitted for both old and new machinery, hydraulic clamps save you time and money. If you have an older press brake with damaged load bearing surfaces, a hydraulic holder is the...

{{productDetail[6091]}}
dressing roller - max. 40 mm | GB series

Roller/axle combination

Suitable...

dressing roller - max. 20 mm | GB RS , GB SL series

High performance straightening...

dressing roller - max. 5 mm | HS series

Straightening rollers for...

wire, strip, cable, wire rope, tube and profile roller guide - max. 250 mm | RF series

Guide rolls with rotating adjustment

4...

{{productDetail[15246]}}
wire, strip, cable, wire rope, tube and profile roller guide - max. 250 mm | RF series

The Alfra offers a machine and tool for switchboard machining, suitable for use in...

{{productDetail[19772]}}
Subscribe to our newsletter
Thank you for subscribing
There was a problem with your request
Invalid email address

Receive updates on this section every two weeks.

With DirectIndustry you can: Find a nearby distributor | Contact the manufacturer to get an estimate or a price Examine product characteristics and technical specifications | View PDF catalogs and other online documentation