- Production Machines >
- Forming Machine >
- Plate bending machine
Plate bending machines
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
Sheet thickness: 31 mm
Sheet width: 500 mm - 12,000 mm
... pinched with the lower-roll during pre-bending and bending. AHS model allows for precise pinching of the plate between upper and lower rolls, thus the length of flat ends are minimized. ...
AKYAPAK MAKINA SAN TIC
Sheet thickness: 100 mm
Sheet width: 500 mm - 12,000 mm
... pinched with the lower-roll during pre-bending and bending. AHS model allows for precise pinching of the plate between upper and lower rolls, thus the length of flat ends are minimized. ...
AKYAPAK MAKINA SAN TIC
Sheet thickness: 73 mm
Sheet width: 500 mm - 12,000 mm
... pinched with the lower-roll during pre-bending and bending. AHS model allows for precise pinching of the plate between upper and lower rolls, thus the length of flat ends are minimized. ...
AKYAPAK MAKINA SAN TIC
Sheet thickness: 5, 2.5, 3 mm
... round bending machines for workpieces up to 2000 mm (78.74 in.) in length. The machines have a solid, closed machine frame and you can adjust the rear ...
Knuth Machine Tools
Sheet thickness: 5, 3, 2.5 mm
... round bending machines for workpieces up to 2000 mm (78.74 in.) in length. The machines have a solid, closed machine frame and you can adjust the rear ...
Knuth Machine Tools
Sheet thickness: 4, 2, 3 mm
... round bending machines for workpieces up to 2000 mm (78.74 in.) in length. The machines have a solid, closed machine frame and you can adjust the rear ...
Knuth Machine Tools
Sheet thickness: 75 mm
Sheet width: 2 m - 4 m
... NEW 4HEP-E is a 4-roll, direct electric-drive plate roll which provides unmatched efficiency, productivity, and ergonomics. Many features and FACCIN innovations set the 4HEP-E apart from every other plate ...
Faccin
Sheet thickness: 5 mm - 150 mm
... easiest to use series of 4-roll plate bending machines with total pre-bending. Highly technological and innovative, 4HEL bending rolls assure high-productivity ...
Faccin
Sheet thickness: 5 mm - 150 mm
... configuration on all medium and large sizes of 4HEP to ensure a greater closeness of the bending force application points, becomes soon a landmark in the machine tool industry. The ...
Faccin
Sheet thickness: 3 mm - 40 mm
Sheet width: 20 mm
A190 TYPE – AIRCRAFT INDUSTRY ROLL BENDING MACHINE CMF has been designing and manufacturing special A190 large capacity rolling machines for more than 20 years and has developed particular ...
Sheet thickness: 1 mm
Sheet width: 120 mm - 1,500 mm
... or closing the seams. VENTIrounder Highlights Rounding of air duct elbow cheeks with pre-formed seams Rounding of sheet metal with Pittsburgh, Snap-Lock or Standing Seam No damage to the pre-formed seams due to ...
Sheet thickness: 1 mm
Sheet width: 1,050 mm
Bending roller with following standard features: • Cast iron main frames • Rotatable top roller • Wired Grooves • Built according to EU safety directives • Rollers of SAE 1050 quality steel with high tensile ...
Scantool Group
Sheet thickness: 1.5 mm
Sheet width: 1,040 mm
Bending roller with following standard features: • Cast iron main frames • Rotatable top roller • Wired Grooves • Built according to EU safety directives • Rollers of SAE 1050 quality steel with high tensile ...
Scantool Group
Sheet thickness: 2 mm
Sheet width: 1,040 mm
Bending roller with following standard features: • Cast iron main frames • Rotatable top roller • Wired Grooves • Built according to EU safety directives • Rollers of SAE 1050 quality steel with high tensile ...
Scantool Group
Sheet thickness: 0.8 mm - 2 mm
UR & U Line - Plate Bending Machines "This mechanical model is designed for light to medium jobs. It is used in jobs up to 2 mm thickness materials. Hand powered or motorised models ...
UZMA Makina San.Tic.Ltd.Sti.
Sheet thickness: 1.5 mm - 3 mm
... US Line - Plate Bending Machines "This mechanical model is designed for light to medium jobs. It is used in jobs up to 3 mm thickness materials. It is used in Aluminium Bendings, ...
UZMA Makina San.Tic.Ltd.Sti.
Sheet thickness: 0 mm - 5 mm
URM Line - Plate Bending Machines "This mechanical model is designed for light to medium jobs. It is used in jobs up to 5 mm thickness materials. It is used in Aluminium Bendings, ...
UZMA Makina San.Tic.Ltd.Sti.
... quality plate bending rolls Four roll hydraulic forming machines are characterized by a high production output because finished parts are obtained in one pass and in a user friendly, ...
... seconds. Standard features: Two hydraulic readouts for the positioning of the bending (side) rolls Hardened rolls 50 to 55HRC Hydraulic conical bending device Hydraulic drop-end ...
Sheet thickness: 26 mm - 300 mm
... roll variable-axis plate rolling machine is a flexible and accurate tool for plate bending. It features motorized rolls, precise positioning, and a sturdy frame ...
DAVI PROMAU
Sheet thickness: 15 mm - 100 mm
... the top roll fixed, and the two side rolls that move up and down to pre-bend the edges, and to roll the plates. The most inexpensive roll for plates from 15-20 mm (5/8 – 3/4 inch) thickness, up to 80-100 ...
DAVI PROMAU
Sheet thickness: 9 mm - 15 mm
Sheet width: 2,550, 3,100, 2,050 mm
... and ease of use are of essence, the 4-roll is the technology of choice. In a 4-roll machine, latest development of the rolling technology, the bottom roll clamps the plate guaranteeing a perfect control ...
DAVI PROMAU
Sheet thickness: 0.5 mm - 4 mm
Developed in 2009 on the basis of the RCS but for thin sheet metal work, the RCE rolling machine is a symmetrical rolling machine with 3 rollers, double pre-bending (no ...
Sheet thickness: 1.5 mm
Sheet width: 12 in
... is a hand-operated slip roller that has a cam-actuated idler roll which enables he user to spot bends at all points along a sheet of material with straight sections on both ends. The idler roll always returns to its present ...
Sheet thickness: 0.9 mm
Sheet width: 24 in
... by Di-Acro. The units are equipped with a cam-actuated idler roll, which allows the user to find bends at any point along a sheet of material, with straight sections on one or both ends. The idler roll always returns ...
TENNSMITH’s slip rolls combine precision-turned, ground and polished high carbon steel rolls with heavy-duty, cast iron end frames and a welded steel base to make an accurate and durable forming tool. Convenient operating features include ...
Sheet thickness: 1.6 mm
... productive advantage of electric-powered drive for production forming of curved parts and tubes made of 16-gauge and lighter sheet metal. Drive power for the SR48P is supplied by a heavy-duty, industrial quality gear ...
Sheet thickness: 2, 1.3, 0.8, 1 mm
Sheet width: 610, 1,219, 915 mm
... drive. All gears fully enclosed. The machine comes standard with third roll drive. The 3-Inch hand rolls are furnished with all three rolls driven. Rear roll has three full-length longitudinal grooves. Machine ...
Sheet thickness: 0.8 mm - 60 mm
... lines dedicated to sheet metal & plate rolling. Features & strengths for our rolling machines: Manual, electric or hydraulic machines 2, 3 or 4 rolls ...
Depends on customer specific, Ameco makes 3-Roller Roll Bender, 4-Roller Roll Bender or Hydraulic Ring and Profile Bender with different applications.
Sheet thickness: 300 mm
Sheet width: 2,050, 2,600, 3,100 mm
... world of bending. In fact it can be used as a normal 4 roll or as a 3 roll bending machine, with the particularity of having a very reduced pre-bending part compared ...
MG S.R.L.
Sheet thickness: 1 mm - 2 mm
Sheet width: 1,020 mm - 1,270 mm
These roll bending machines are standardly equipped with a Driving power for 2 working speeds and with a 3-shaft Driving power.The machine is driven by a pole-changing transmission ...
Schwartmanns Maschinenbau GmbH
Sheet thickness: 1, 1.3, 1.5 mm
The small slip bending roll machine 102 is suitable for construction areas as well as for repair shops. Because of its high accuracy it is also often used in model workshops or training centers. Details Rolls ...
Schröder Group
4 roll plate bending machine with initial pre-bend – bending – final pre-bend all in one stroke Machine fully hydraulic for a reduced maintenance and ...
IMCAR
... rectangular tubing. Special dies are available for rolling pipe or extrusions. All machines can be operated either vertically or horizontally and include a motor brake for precision bending. PBM ...
Durma HRB-3 Three Rolls Hydraulic Cylinder Bending Machines offer you the best bending performance with the bending flexibility equipped with Durma technology for medium ...
Sheet thickness: 0 mm - 0 mm
Sheet width: 0 mm - 200 mm
The tree rolls rounding machine in electronic version (RME) have proven over decades their high flexbility and reliability for professional craft and industry. By the three-roller bending machines ...
Peter Prinzing GmbH
... assures the best plate feeding also when rolling thin plates and the large opening between the top and lower rolls increases machine flexibility. The TBH bending machines ...
Carell Corporation
... seconds. Standard features: - Two hydraulic readouts for the positioning of the bending (side) rolls - Hardened rolls 50 to 55HRC - Hydraulic conical bending device - Hydraulic drop-end ...
Haco Atlantic Inc.
Sheet thickness: 8 mm - 85 mm
Sheet width: 3 m
... 4 Hydraulic plate ejector 5 Ground rolls for spécial jobs 6 Infinitively variable speed system • Electronical balancing system for parellel movement of the rolls (0280-320-350-380- 400 460) 7 Optional ...
Sahinler Metal Makina End. A.S.
Sheet thickness: 2.5, 3, 1.2, 1.5 mm
Our SMR ve SMK models are produced for general light works. Especially used for up to 3,0mm bending capacity. Wtih wide range of use, it is especially preferred by small workplaces. Cast iron main frames Main motor ...
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining