|
|
|
compact and light, insensitive with dust and moisture, pressure of use 6 bars, button box equipped with an emergency stop, controls precise speed, apparatus designed for intensive uses
|
|
|
|
|
|
Air Chain Hoist capacity up to 100 ton
For nearly 50 years, Ingersoll Rand has been serving the material handling needs of the following industries worldwide: automotive, appliance, aerospace, electronics, food, furniture, glass packaging, printing, pharmaceutical, sheet metal, textile, and warehousing.
The many years of manufacturing experience, ISO 9001 certification, and a 24 hour service network has created a unique ability to respond to your needs with the highest quality material handling solutions, technology, and services available in the world.
Ingersoll Rand has pioneered the development of pneumatic powered lifting, balancing, and handling equipment making us the world leader in the manufacturing of ergonomic, in process, manual assist, pick and place solutions.
With a solid commitment to research and development we have applied our expertise to introduce new products and technology which can also integrate the latest electronics and controls, such as the InteLIFT system: an electronically controlled, air powered intelligent handling solution.
By using Ingersoll Rand solutions created for your material handling needs, you can expect improved productivity mandated by a global economy. At the same time, you can expect ergonomic solutions which improve operator performance and avoid labor downtime due to health or safety issues in using automation
|
|
The Red Rooster range of hoists is widely used both on- and off-shore, throughout the world; typically in marine, shipbuilding, chemical and petrochemical, food, paint and papermaking industries, wherever reliability of performance and safety in use are paramount. Red Rooster air chain hoists are compact in design and low in headroom. The hoists have infinitely variable speed, and are rated for continuous use.
Another advantage of the air hoists is the soft start and stop. Air hoists do not impose shock loading during acceleration and deceleration. The Red Rooster air hoists are of compact construction with cast iron bodies for durability and safety.
Check out the latest introduction of new low headroom trolleys.
|
|
|
Atlas Copco Air Hoists will stand up to the roughest treatment. Overheating is never a problem, even during intensive operation at maximum load. Outstanding inching characteristics give precise load control. Compact, light-weight designs make installation easy. Designed to complement the hoists, Atlas Copco trolleys are supplied as manual or motor-driven units. Both hoists and trolleys are certified according to the ATEX directive. Atlas Copco air hoists are available with a lifting capacity from 200kg to 5000kg.
|
|
|
|
|
|
Air Chain Hoist capacity up to 100 ton
For nearly 50 years, Ingersoll Rand has been serving the material handling needs of the following industries worldwide: automotive, appliance, aerospace, electronics, food, furniture, glass packaging, printing, pharmaceutical, sheet metal, textile, and warehousing.
The many years of manufacturing experience, ISO 9001 certification, and a 24 hour service network has created a unique ability to respond to your needs with the highest quality material handling solutions, technology, and services available in the world.
Ingersoll Rand has pioneered the development of pneumatic powered lifting, balancing, and handling equipment making us the world leader in the manufacturing of ergonomic, in process, manual assist, pick and place solutions.
With a solid commitment to research and development we have applied our expertise to introduce new products and technology which can also integrate the latest electronics and controls, such as the InteLIFT system: an electronically controlled, air powered intelligent handling solution.
By using Ingersoll Rand solutions created for your material handling needs, you can expect improved productivity mandated by a global economy. At the same time, you can expect ergonomic solutions which improve operator performance and avoid labor downtime due to health or safety issues in using automation
|
|
Carrying capacities: 250 kg up to 100 t.JDN Air Hoists PROFI Series are very robust and therefore suitable for tough industrial applications even in continuous working processes. According to requirement there are various control systems. For traversing loads there are different trolleys to meet your special demands.
Standard features:
- suitable for application in hazardous areas,
- sensitive infinitely variable speed control for the precise positioning of loads,
- easy operation,
- suitable for lube-free operation,
- frequent switching and extended duty cycles,
- low maintenance,
- low headroom, lightweight,
- sound absorption,
- insensitive to dust, humidity and temperatures ranging form -20 °C up to + 70 °C
- from 1 t upwards with overload protection (EC-version)
|
|
Balancer
The rope balancer is a pneumatically powered hoist unit. Thanks to the low manual force required for the horizontal movement, these units are the optimum solution for careful load balancing and positioning. In particular complicated positioning and assembly tasks can be performed easily and safely with this unit. Rope balancers make it possible to reposition loads quickly in short cycles.
There are two different basic units:
D-BP 55 Load capacity 50 kg (at 6 bar)
D-BP 110 Load capacity 100 kg (at 6 bar)
|
|
Series 2200 Air Chain Hoist
Capacities 1/4 to 1 Ton
- Standard Lift 10' (other lifts available)
- Compact design uses aluminum alloy frame
- Variable speed control
- Roller or link chain
- Pull cord or pendant throttle control
- Unlimited duty cycle
- Explosion proof models
- Hook or lug mount
|
|
|
H-Lift, an ISO 9001 certifired firm by Lloyd's Register, specializes in lifting and hoisting equipments, our products include: manual chain hoist, lever hoist, push trolley and geared trolley, trolley clamp, beam clamp, wire rope pulling hoist, low headroom trolley hoist, vericallifting clamp,universal lifting clamp, horizontal lifting clamp, snatch block, permanent magnetic lifter, etc.
|
|
Chain-blocks Intelev of 250 kg to 2 tons.
Important stock St Etienne (DEPT 42).
Consult your outline dimensions on our Internet site www.seral.fr
|
|
|
|
|
|
STAHL CraneSystems's ST chain hoist programme is one of the most striking and wide-ranging on offer in the world. In use in thousands of applications for decades, modernised and optimised over and over again, the STAHL CraneSystems chain hoist is a classic. The ST series is available in 12 S.W.L. ranges from 125 kg to 5,000 kg.
It can be used as a stationary hoist with a suspension hook, with rigid mounting, with push or electric trolley, and is particularly suitable for rugged industrial applications.
The innovative and pioneering chain hoist design offers considerable economic advantages. The extremely short headroom available as an alternative to every type of chain hoist optimises the effective hook height and reduces wear on the chain. STAHL CraneSystems's ST chain hoist programme is also available in explosion-protected design for Zone 1 and Zone 2 and Zone 21 und Zone 22. STAHL CraneSystems was the first hoist manufacturer to implement the ATEX regulations in the whole chain hoist programme.
|
|
Eurochain VL is the solution for all your lower and medium load hoisting applications. One of a new range of high-tech hoisting units, Eurochain VL is perfectly adapted to your industrial requirements.
Furthermore, in order to meet your hoisting and mechanical handling needs in the possible way, Eurochain VL can be fitted to manually-driven and electric trolleys mounted into monorails, jib cranes, overhead handling systems or EOT cranes.
|
|
HSZ-A 619, 622,620,623
TBM Chain block have four types according to the different marketing requirements which are HSZ-A 619, 622, 620, 623.
Capacity ranges from 0.5T-20T, automatic double pawl braking system, double cover protection, light weight robust construction, Low effort to lift maximum load, Extra thick asbestos free friction discs. Fully forged hooks are fitted with safety latches as standard. Unique hand wheel cover for guiding hand chain at any angle, Built in overload protection device. ISO high grade alloy load chain, Zinc plated hand chain as standard.
|
|
TÜV-proofed TM-CHAIN BLOCKS and TM-LEVER BLOCKS with carrying capacity of 500 kg to 6 tonnes complete our hoist program. Both designs are delivered with an individual test certificate and a detailed instruction manual. They also have the following advantages:
- minimum effort to raise maximum load
- stocked with high grade chains in grade 80, protected against corrosion through galvanization and yellow chromating
- compact design
- pollution protected closed pinion gear
- weather protected automatic Weston brake
- durable baked enamel paint protection
|
|
|
|
|
|
For nearly 50 years, Ingersoll Rand has been serving the material handling needs of the following industries worldwide: automotive, appliance, aerospace, electronics, food, furniture, glass packaging, printing, pharmaceutical, sheet metal, textile, and warehousing.
The many years of manufacturing experience, ISO 9001 certification, and a 24 hour service network has created a unique ability to respond to your needs with the highest quality material handling solutions, technology, and services available in the world.
Ingersoll Rand has pioneered the development of pneumatic powered lifting, balancing, and handling equipment making us the world leader in the manufacturing of ergonomic, in process, manual assist, pick and place solutions.
With a solid commitment to research and development we have applied our expertise to introduce new products and technology which can also integrate the latest electronics and controls, such as the InteLIFT system: an electronically controlled, air powered intelligent handling solution.
By using Ingersoll Rand solutions created for your material handling needs, you can expect improved productivity mandated by a global economy. At the same time, you can expect ergonomic solutions which improve operator performance and avoid labor downtime due to health or safety issues in using automation.
|
|
Electric chain hoist model CPE with suspension hook or with integrated trolley
Capacity 1600-10000 kg
The standard, oil bath lubricated planetary gearbox is particularly smooth running and enables a low overall height. This robust unit for heavy duty applications with thermal overload protection (in connection with low voltage control). The units are supplied with direct control as standard.
Features
- 400 or 230 V, 3-phase, 50 Hz- Euro-voltage, resp. 460 or 230 V, 3-phase 60 Hz. VTEF version (2-speed) 400 V, 50 Hz or 460 V, 60 Hz.
- Motors protected to IP 54, insulation class F.
|
|
Demag introduces Model DC, a new generation of chain hoists. Precision quality with innovative features for added safety and serviceability.
- Plug in electrical connections
- Diagnostic service data
- Integrated 3 axis motion controls
- CSA approved
- 24 volt pendant control voltage
- Cycle and load spectrum monitoring
- Upper and Lower limit switches
- Slip clutch to prevent overloads
- High safety factor for load chain
- Gearbox lubricated for 10 years
- State of the art controls
- Long life low amp switching
- Easily adjustable pendant height
- Pendant or available with remote control
|
|
|
|
|
|
STAHL CraneSystems's ST chain hoist programme is one of the most striking and wide-ranging on offer in the world. In use in thousands of applications for decades, modernised and optimised over and over again, the STAHL CraneSystems chain hoist is a classic. The ST series is available in 12 S.W.L. ranges from 125 kg to 5,000 kg.
It can be used as a stationary hoist with a suspension hook, with rigid mounting, with push or electric trolley, and is particularly suitable for rugged industrial applications.
The innovative and pioneering chain hoist design offers considerable economic advantages. The extremely short headroom available as an alternative to every type of chain hoist optimises the effective hook height and reduces wear on the chain. STAHL CraneSystems's ST chain hoist programme is also available in explosion-protected design for Zone 1 and Zone 2 and Zone 21 und Zone 22. STAHL CraneSystems was the first hoist manufacturer to implement the ATEX regulations in the whole chain hoist programme.
|
|
|
|
|
|
STAHL CraneSystems's ST chain hoist programme is one of the most striking and wide-ranging on offer in the world. In use in thousands of applications for decades, modernised and optimised over and over again, the STAHL CraneSystems chain hoist is a classic. The ST series is available in 12 S.W.L. ranges from 125 kg to 5,000 kg.
It can be used as a stationary hoist with a suspension hook, with rigid mounting, with push or electric trolley, and is particularly suitable for rugged industrial applications.
The innovative and pioneering chain hoist design offers considerable economic advantages. The extremely short headroom available as an alternative to every type of chain hoist optimises the effective hook height and reduces wear on the chain. STAHL CraneSystems's ST chain hoist programme is also available in explosion-protected design for Zone 1 and Zone 2 and Zone 21 und Zone 22. STAHL CraneSystems was the first hoist manufacturer to implement the ATEX regulations in the whole chain hoist programme.
|
|
Electric chain hoist particularly designed for theatre and staging applications for loads of 125 to 2500 kg.
STAGEMAKER COMPACT is specifically designed for mechanical handling of theatre and stage equipment. It enables sound, lighting and decorative fittings to be positioned and supported safely.
The technical characteristics and upgrade ability of STAGEMAKER have established its essential role in numerous international events whether they could be cultural, sport or commercial.
|
|
Eurolift BH, electric belt hoist comes up to your expectations where hoisting in clean environments is needed.
Eurolift BH complies with EU standards and provides the strength and robustness of an industrial design combined with perfect operating cleanliness to meet the most demanding health requirements in many different fields such as the food and chemical industry, white rooms, etc.
|
|
Electric belt hoists combine technical expertise and design for applications where the importance of hygiene and safety in production is vital, such as the food industry, agriculture, chemical manufacturing, the precision industry and more.
Range from 500 kg up to 2000 kg
High resistance polyester belt
True vertical lifting, with enhanced safety features against side-pulling and twisting effect during lifting
2-speed motors (max lifting speed 10 m/min) complying with IEC 31.1/34.2
IP55 protection and class F insulation
Reduction gear totally enclosed, silent and sealed
Adjustable upper and lower electric limit switch for hoisting
Load limitor fitted as standard, preventing accidental overloading
Hook block electrically isolated from the hoist
|
|
ABUS Electric Chain Hoists are available for a safe working load up to 4 tonnes and feature user friendly advantages such as:
Extreme low headroom, dual speed lifting as standard, brake linings with exceptionally long lasting wear characteristics as well as a large variety of additional features.
|
|
3 ranges: electric hoist CPS, capacities of 125 kg to 500 kg, casing aluminum, thermal protection,...
Electric hoist PVC, capacities from 500 to 2000 kg, 1 or 2 speeds of lift, groups FEM 1Am, hour meter and of startings, end of the road high and low electric,...
Electric hoist CPE, capacities from 1.6 to 10 T, 2 speeds, engine designed for high duty ratios.
|
|
|
|
|
|
The DMK electric chain hoists respond to the needs of the international markets which require products of guaranteed quality with a wide range of uses, long-term reliability, safety guarantees in all phases of operation, and excellent value for money. The DMK hoists stand out for their careful and modern design putting them a the top of their category. The quality of the components, the high technology used in the production of the mechanical parts, in the finishes and in the surface treatments, the constant and checked quality system UNI EN ISO 9001 which covers the company's entire production, allow Donati Sollevamenti to offer a product in line with the latest international standards.
The special water-repellent paintwork is applied with an electrostatic process in complete isolation which guarantees its durability and a constant high performance, also in particularly hostile environments.
The DMK electric chain hoists are part of the lifting products range manufactured by Donati Sollevamenti, a leading company in its filed in Italy, and one of the leading companies in the world in the lifting equipment sector. The warranty lasts 3 years from the delivery date.
|
|
|
The DC-Pro chain hoist for loads up to 5,000 kg is a fully featured, highly versatile chain hoist, which can be installed and put into service in a minimum of time. It is extremely user- and maintenance-friendly and features an ergonomic design with a high standard of safety and reliability. The particularly long service life (FEM 2m+) provides even greater operating efficiency.
|
|
|
|
|
|
Housing
- Cast aluminium housing with maximum solidity (no plastic material)
- For extreme working conditions: casted cooling gills
Motor
- Design for tough working conditions
- Normal, fast and super fast speed models available
Transmission
- Helical-toothed first and second gear step for quiet running
- Permanent lubrication for wear resistant operation
Brake
- Maximum safety (construction: brake after slipping clutch)
- New advanced brake design
Slipping clutch
- Simple and precise adjustment
- Maintenance free and highly resistant to wear
Chain guidance
- 2-part construction to optimize maintenance
- Reinforced plastic material highly wear resistant
Chain wheel
- Made of hardened steel
- With additional chain pockets (4 mm): hence quiet running
Hoisting chain
- Zinc plated
- Surface-hardened
Geared limit switch (standard)
- Simple adjustment
- Exact positioning
Contactor control system
- Simple technology (no electronics susceptible to interference)
- 42 V control system allowing highest safety of operation
Control switch
- With built-in support wire as a standard
- 2-buttons: design especially ergonomic
|
|
With suspension hook. push, geared or electric trolley.
Standard lift height 3 m, control cable 2.5m
Operating voltage 220-440V, 50/60Hz, 1-3 phase
Low voltage control 36V is standard.
High efficient energy-saving motor, asbestos free brake system.
Light weight, compact and solid body case.
Top and bottom hooks are fitted with safety latches as standard.
Drop forged steel suspension & load hooks are heat treated and fracture resistant. In case of dangerous overloading or abuse, the hook does not fracture but will slowly yield.
Solid chain bucket.
Super strong surface hardened chain
Limit switch devices fitted at both top & bottom ends, switch off power automatically to prevent load chain from running out.
Phase error relay, a specially designed current-post, prevents motor from running at incorrect wire connection.
Overload protection and thermal protection.
|
|
|
Shh serie electric chain hoist have newest square shape complied with the international demand. the high intension aluminium alloy outline cover in very beautiful,light construction,strong corrosio resistance,which suitable for the high classification working.the distance between hooks invery small. unique friction clutch overload protection, which can protect the machine when overloading and overwinding. the column rotor taper breakong motor with dish reliable,low yawp,long using life.the bidirectional lifting limited confirm use safety.the carbonized load chain with high tension and abrasive resistance.high quality electric control component with low malfunction and high safety protection,new construction,modularze designing etc., which can assemble multiform with one economy,It's very convenient for repair and tear open.theproduct is complied with the up to date international standard.
|
|
AccoLift
Standard Features:
Dual Brake System :
Disc type motor brake working with a mechanical load
brake provides load lowering control. Electric brake
designed for easy access and simple adjustment.
Upper and Lower Limit Switch :
Prevents overwinding by stopping operation in the case of
overlifting or overlowering.
Overload Alert :
Installed as load detecting safety device to prevent
overload for greater hoist longevity.
Push Button Control :
Compact design to enable one-handed operation. Rated
NEMA 4 protection. Emergency stop button included.
Push button cable has strain relief to prevent cable
damage.¬«
|
|
|
|
Hoists
