|
|
- Maximizes cost savings by eliminating step drilling for deep holes
- Reduces cycle times up to 15 times over gun drilling
- Reverse web taper for maximum chip removal
- Ultra-smooth surface treatment aids in chip removal
- Coolant-thru
- TiAlN coated for long tool life
The FTO-GDXL is capable of non-step drilling up to 30 times diameter! By eliminating step drilling, cycle times are reduced up to 15 times over gun drilling.
FTO-GDXL Drills are coolant-thru and feature a reverse web taper, ultra-smooth surface treatment, and OSG’s special TiAlN coating, all contributing to efficient chip removal in deep holes. The new drill is available in sizes ranging from 2.5mm (0.098”) to 20mm (0.787”) in diameter.
These drills are capable of working in a wide variety of work materials. In trial applications, cost savings over traditional gun drills are most often measured in thousands or tens of thousands of EURO.
To request more information on this product, please visit our Literature Request Page |
|
The CoroDrill 805 makes it possible to drill deep holes without moving the workpiece to a dedicated deep hole drilling machine i.e. all operations can be completed in one set-up.
Deep holes can be performed with high productivity and reliability achieving a hole quality comparable with traditional deep hole drilling. Another advantage is that no extra pump capacity is required.
CoroDrill 805 carries the same standard inserts as CoroDrill 800.
Deep holes are defined by a high ratio between hole depth and hole diameter. Deep hole drilling is the preffered method for drilling hole depths of more than 10 x the diameter up to 150 x diameter. Sandvik Coromant are a world leading manufacturer of deep hole drilling systems.
|
|
TBT single-lip drills are manufactured for any drilling diameter (1/1000 mm steps) from 0.9 mm to well over 50 mm and in overall lengths which can even exceed 2500.
Depending on the material to be drilled, the machine utilised by the customer and the particular drilling situation, we manufacture the optimum tool for your applications.
Whether in standard version or for widening already existing bores, as step tool for making precision stepped bores with minimised centre offset or as special tool for special boring, whether without coating or in a version with coating, and for the most exacting requirements, also with diamond-tipped tool cutting edge.
TBT advises you and implements your head and shaft requirements for the tools efficiently and quickly with the latest design and production methods.
The tool head and shaft are brazed with the clamping sleeve to fit your machine.
TBT always keeps several hundred different clamping sleeves in stock. Just ask for our complete offer of accessories for deep hole drilling. |
|
Drills are basic manufacturing tool whose speed, precision, and safety have an important bearing on the quality and efficiency of production operations.
OSG is gaining an increasingly large share of the drill market through the development of drills that ensure superior productivity.
Used in combination with OSG's taps and end mills as a total tooling solution, OSG drills provice manufacuturers with various business advantages, including cost savings.
Try with our:
- EX-SUS-GDS/GDR drills for stainless steels (No pecks anymore!)
- VP series for hardend steels with high speed drilling
- SH-DRL for quenched and tempered steels (up to 70 HRC!)
- etc....To request more information, please visit our Literature Request Page |
|
Shaped carbide, either discs or stars, are brazed
onto drilling tools that are used to cut steel casing or
to help remove down-hole junk. |
|
Machining Shaft against shoulder
Diameter range 1.0 - 7.9 mm
Adjustment range -0.2 mm up to +0.1 mm
Rolling depth, standard 40 mm
Standard mount
Cylinder shank
(with clamping surface on request) 6 - 20 mm dia. or Morse taper 1 - 3
Optional tool equipment ARG-0-S- VDI, HSK etc. mounts
- Different rolling depth "endless"", with cylinder shank
- Different number of rollers
- Special rollers
- Inside cooling max. 8 bar coolant pressure
|
|
| For burnishing the outside diameter of cylindrical parts, such as shafts rotating in bushings or bearings. Provides an ideal surface for grease and oil seals. |
|
* Deep drilling in “one hit” to 8 x diameter - no pecking required - reduction in machining time.
* Fast and efficient chip evacuation leading to high productivity and reduced cost per hole.
* High quality finish, good hole tolerance.
* Consistent forces.
* Improved tool life leading to a reduction in machine downtime.
* Exceptional levels of performance in steel,
stainless steel, cast iron, copper, aluminium and other materials. |
|
The flowdrill process is based on a combination
of thrust force and rotation speed. It allows to form
bushing into thin walled metallic materials.
All metals which can be soldered, ferrous or non
ferrous, can also be flowdrilled. Parts with a protecting
coat like chromium platimg, etc., are non suitable for
the flowdrilling.
In order to precisely control the process (thrust and
speed) it is recommended to work with the machining
unit BEA25CNC, for less demanding applications the
unit BEM20. For thread cutting or forming the tapping
unit GEM20. |
|
| Solid Carbide Drills in Jobber Length...Fast Sprial...Three Flute...Straight Flute...Flat Drills...and Conbide Drill and Countersinks. Fractional and Metric Sizes |
|
Progression by hundredths from Ø0.60mm to Ø20.20mm.
The new magafor reamer kit solves your problem for the general reaming tolerances : F7 - G7 - H6 - H7 - H8 - H9 - N7 - P7 - R7.
_ make easier to find out and to replace,
_ protection against shocks, the loss, the external,
_ each kit is supplied with 2 tables:
_ how to choose reamer with regard o the tolerance,
_ recommendations of using.
Materials :
HSS-E Cobalt
Carbide
Diameters :
HSS-E Cobalt : Ø0.70mm to Ø20.20mm
Carbide : Ø0.60mm to Ø20.05mm
pages 90 and 91 from Magafor 701 |
|
CoroPlex™ MT
By introducing the multifunctional CoroPlex™ MT Sandvik Coromant establishes a new standard that is of outmost user benefit for operations performed with the latest of machine tool technologies.
CoroPlex MT is a combination of two winning concepts in one – CoroMill 390 and CoroTurn 107. It is either applied rotating as an effective tool for milling applications – or indexed in a number of optional positions for stationary turning using two different CoroTurn 107 inserts.
Sandvik Coromant´s multifunctional tool CoroPlex MT is designed for practically unrestricted use of all the insert positions possible without support of any extra software. Although CoroPlex MT is dedicated for Multi-Task machining it is easy to use the tool in somewhat older machines working with the software capacity limited to conventional standard cycles.
CoroPlex™ MT is an innovative multifunctional tool for finishing the workpieces in a single set-up with reduced downtime on the machine. It also completes together with CoroPlex TT twin tools, with two inserts in one holder giving the possibility to change operations momentarily, and CoroPlex SL mini-turret, with four turning tools in one, the dedicated tooling Sandvik Coromant provides Multi-Task machining. |
|
A boring tool is usually a modular tool, consisting of a basic holder, adapter and a cutting unit in the form of a cartridge, slide or fine boring unit. A fine boring head holds a boring bar or cartridge. A reamer has a tool shank and a close pitch head with brazed blades. The tools, except the reamer, are radially adjustable within a specific diameter range.
Sandvik Coromant now introduces CoroBore 820, a unique addition to its boring tool programme.
CoroBore 820 is a new solution for high productive boring preferably in roughing operations. The boring range is 35 - 260 mm and the boring depth is up to 4 x diameter. It is designed for internal coolant supply.
Three cutting edges allow a higher penetration rate with maintained tool life. A comprehensive programme of tool bodies, slides, shims and cutting inserts allow CoroBore 820 to be configured to suit the widest possible range of applications.
CoroBore 820 in combination with Duobore makes a highly productive team for rough boring from Sandvik Coromant. |
|
BoreSTAR out-performs any other kit when it comes to range, rigidity, accuracy and repeatability.
The BoreSTART kit is fast and simple to use (no spacers or complicated set-ups) but is extremely rigid and accurate. It is dial adjustable in increments of 0.0001". Range is from .314" to 6.69" (8mm to 170mm)
|
|
Carbide,industrial quality
GFB Bits exceed DIN standard
NOVUMTEC is specifically making high quality wide range bits and accessories for all kind of ScrewDrivers, Power tools, Machines, Tools.
"GFB" bits at Taiwan price, meet DIN Standard, match any screw heads perfectly is long life bits. |
|
Gamflex Bi-Metal Holesaws Metal Cutting
Made from Bi-metal high speed steel, these holesaws are blue and have exceptional strength and high wear resistance. They cut a variety of materials including steels, cast iron, non ferrous materials, plastic and wood.
Single Tool Holecutters Wood Cutting
Beige in colour and are specifically designed for cutting wood and cement sheet. Wood Holecutters are tungsten carbide tipped and cut 5 times faster in wood than conventional high speed steel bi-metal holesaws.
High Speed Steel Holecutters Sheet Metal Cutting
Produce accurate, round clean holes in steel and alloy sheets. Holecutters are suitable for electrical installation work.
Diamond Grit Holesaws Tile/Fibro Cement Cutting
Rapidly cut holes in fiberglass, hard plastics, fibro cement and ceramic tiles.
Tungsten Carbide Tipped Holecutters Stainless Steel Cutting
Cuts to a depth of 4mm in steels, fiberglass, chipboard, glass reinforced plastics and other abrasive materials. |
|
Description:
- Cut through steel, tin, aluminum, fiberglass, wood and plastic.
- Deep 1-5/8in. (41.3 mm) cutting depth allows for cutting through 2in. x 4in. wood studs.
- Extra-tough M42 alloy blade - we use the highest grade of tool steel to outlast competitor's blades. That beats premature saw replacement and saves you money.
- Steam oxide finish - no paint to gum up and slow cutting. The saw runs cooler for longer life and better performance.
- Extra-thick backplate minimizes vibration for smoother, easier, less-tiring cutting.
- Made in USA.
- Point of Purchase packaging. |
|
Carbide Tipped Hole Saws
Specifically designed for sawing holes in abrasive materials such as fiberglass, particleboard, asbestos board, and formica.
- Tungsten carbide tooth tips offer the highest wear resistance possible and longer life cutting abrasive materials
- Ground and set teeth to help cut materials that bi-metal saws will not cut
- 3 teeth per inch creates wider gullet for better chip clearance and faster cutting. |
|
| Criterion now offers a facing bar to complement our 3F-HB boring and facing head. The bar is made of premium alloy steel with 4 flats and a shank ground to a tolerance of 0.0005. This bar can also be used in our standard boring heads or in a lathe as a boring bar. |
|
|
|
Drill bits, Reamers
