|
|
Technical specifications:
Max support 180 Kg
Air network for pneumatic tools
Pneumatic tilting (0°/85°)
Industrial roller bar kit. Fold-up type
Dim mm 2470x1070x1310h
Max dimensions professional profile to test: mm 1800 x mm 1800 S105
Min. dimensions professional panel 300x300 mm
|
|
Machining Taper bores
Diameter range from 4 mm
Rollers according to requirement
Standard mount Cylinder shank (with clamping surface on request) or Morse taper
Optional tool equipment- VDI, HSK etc. mounts
- Inside cooling max. 8 bar coolant pressure
|
|
WhizIn, another revolutionizing patented product developed by WhizCut, is designed to improve productivity of internal applications. It has been specially developed for small diameters in internal turning applications, and is unlike anything else on the market.
The WhizIn tool holder has the carbide bar mounted at an angle to achieve the maximum stability for a set diameter. By grinding away less from the base of the insert, the insert becomes more stable. Other benefits are less grinding time and grinding stress and that the coolant may go through the tool holder and spray directly on to the cutting zone. |
|
| A boring tool is usually a modular tool, consisting of a basic holder, adapter and a cutting unit in the form of a cartridge, slide or fine boring unit. A fine boring head holds a bore bar or cartridge. A reamer has a tool shank and a close pitch head with brazed blades. The tools, except the reamer, are radially adjustable within a specific diameter range. |
|
Designed with a length to diameter ratio of approximately 4-1/2 to 1 , this line of carbide boring tools features set-screw flats that position the cutting edge on exact centerline when used in a Criterion Reaming head.
They are available in two all-purpose grades of carbide - the ABT tools are a grade C-2 and are used on cast iron and all non-ferrous materials. The SBT tools are a grade C-6 and are intended for use on steel and other continuous chip materials. For the correct grade for your particular job we suggest you contact your carbide supplier or you may refer to the comparison charts found in most carbide catalogs.
Carbide Boring Tools with minimum boring diameters of 1/8, 3/16 and 1/4 feature a solid carbide neck and head. |
|
CTW TM Technology
The geometry has been developed to incorporate CTWTM (Continuously thinned web ) Technology. This means that when the user re-point grinds the professional drill, the resultant point is already thinned.
|
|
hydra 5D
two screw and one screwdriving are included with a professional drill body
d1Inch d1mm d1decimal Inch l2mm l1mm
15/32 11.91 0.4688 69 130
12.00 0.4724 69 130
31/64 12.30 0.4844 69 130
12.50 0.4921 74 140
1/2 12.70 0.5000 74 140
13.00 0.5118 74 140 |
|
METRIC SIZES from 3mm to and including 16mm
SGS Tool Company adds to its High Performance Professional drill line with the introduction of Ice-Carb, an Internal Coolant Drill for drilling depths up to 7 x Diameter.
ICe-Carb%u2019s unique geometry features enhance coolant flow and chip removal. Each tool comes with SGS%u2019 exclusive Ti-NAMITE-A (AlTiN) tool coating for higher thermal stability and greater wear resistance in deep hole drilling.
The tool%u2019s drilling depth potential eliminates the need for pecking in most applications and the corner protection increases tool life. |
|
CoroDrill Delta-C R846
Sandvik Coromant has developed a new professional drill, CoroDrill Delta-C R846, for Heat Resistant Super Alloy machining in aerospace applications, such as the production of gas turbine casings. The new drill is designed for the continuous and reliable production of holes in demanding HRSA materials, which place heavy demands on the cutting edge. The geometry of the new CoroDrill Delta-C is optimised for maximum efficiency in repeat short hole drilling. The new cutting edge has a more consistent curve for added strength in the outer corners where cutting forces can be highest in demanding applications. This distributes the cutting forces evenly over the cutting edge – giving an even wear without sudden changes.
CoroMill Plura
The CoroMill Plura solid carbide endmill family covers most milling applications from roughing to superfinishing, keyslot milling and chamfering.
The endmills are designed with several length options to maximise productivity from short to long reach. They are supplied in diameters from 0.4 - 25 mm and also available in an multi-edged version for super finishing and a spherical version for optimised accessibility.
CoroMill Plura endmills are supplied in three different carbide grades covering wet and dry milling in steels, stainless steels, cast iron, heat resistant super alloys, hardened materials as well as aluminium. |
|
ENGINEERED HARDFACING :
Shaped carbide, either discs or stars, are brazed
onto industrial drilling tools that are used to cut steel casing or
to help remove down-hole junk. |
|
Solid Carbide Drilling
KMT high performance HP Solid Carbide Professional drills offer the highest metal removal rate in the industry. Bottom line savings from increased speed can result in cost savings up to 50% versus competitor's products. With through coolant diameter ranges from 3,00 mm to 21,00 mm (.118" to 1.011"), the HP drill series is application specific in steel, stainless steel and high temperature alloys, and iron.
210/211/212 HP KC7515
For stainless steel and high temperature alloys.
224/225 HP KC7315
Ultra high speed drilling
254/255/256HPC KC7315
Excellent hole quality in regards to straightness ... |
|
| The Miller high-performance drilling tools manufacturers fit perfectly into the HPC philosophy of the MAPAL Group. The Mega Professional drill drilling tool series provides high-performance tools for solid drilling. Special cutting edge geometries which are well-suited to the material to be machined ensure technological advantages and the excellent economic efficiency of all solid carbide drilling tools. Besides the extensive standard product range also special tooling solutions for special applications can be provided. |
|
| Straight Flute...Common Shank...Right Hand Cutting... Solid Carbide reamer...Diameters in Fractional, Metric, and Decimal |
|
Typ 507 Reamer:
Solid reamer, left hand spiral 8-10°, extreme
differential pitch. Solid carbide tip 6-11 mm,
brazed fl utes Ø 12-40 mm. Grade ISO K10.
DIN8094 Form B.
Type 507C Reamer:
Solid reamer, left hand spiral 8-10°,
extreme differential pitch. Solid carbide
tip 6-11 mm, brazed fl utes Ø 12-40
mm. Grade ISO K10.
Type 509 Reamer:
Solid reamer, straight flutes, extreme differential pitch.
Grade ISO K10. DIN 8051 Form A.
Type 509C Reamer:
Solid reamer, straight flutes, extreme differential pitch.
Grade ISO K10.
Type 509CC Reamer:
Solid reamer, straight flutes, extreme differential.
Cermet: high cutting speed and wear resistance
in steel and professional cast iron applications. The optimum
solution when the cutting conditions are stable.
Common features:
- Reamers are stocked in tolerance H7 and also
semi-finished for quick
conversion to customers' requirements.
- Differential pitched flutes, for round holes and elimination of vibration.
- Lapped flutes for a better surface finish. |
|
- Soft to Medium Hardness Materials
- High Speed Steel
- 20° Right Hand Helix, Right Hand Cut
- Cutting Diameter Tolerance is +.001/-.000
- Pilot Diameter Tolerance is +.000/-.001 |
|
| Designed for "1960 Series" socket head cap screws, Weldon Tu-lip Counterbores are extremely free cutting. With only two lips to regrind, tool room grinding costs are greatly reduced. Generous chip room in the flutes minimizes breakage caused by clogging. Solid pilots without grooves will not ream or mar holes. |
|
Weldon high-speed steel countersinks and deburring tools are known for their high quality, unique designs and outstanding performance. No matter what material you're cutting, or what angle you're cutting it at, our tools will give you the chatterless finishes you're looking for.
With Weldon, you always get real value in the cutting tools you buy. Superior-quality countersinks and fetling tools at very competitive prices. Choose from our large selection of styles and sizes.
- Chatterless finish
- Single cutting edge for fast removal of stock
- Free-cutting
- Easily sharpened
- Designed for 60°, 82°, 90° and 100° cutting
- Specials also available
Tools of this type are easily sharpened either by the use of a small mounted suppliers of grinding wheel inserted into the hole or on the Weldon Axial Relief Sharpening Fixture (Part #96-169). |
|
PATENTED PCD DIAMOND DRILL BIT MANUFACTURERS
* Vastly improved drill life
* Improved drill hole surface finish
* Greater tolerance control
* Greatly reduced downtime due to fewer drill changeovers and quality checks
* Rugged construction enables the Everlast® drill to handle difficult conditions that damage other professional drills beyond use
* Increased drill speeds and feeds
* Designed for very high silica aluminum
* Designed for many current composite materials - Kevlar®, etc. |
|
|
|
Drill bits, Reamers
