|
|
Bock Workholding's MonoQuad, MultiQuad and Hex Systems integrate the unique features of the Twin Vise into a clamp system for use on horizontal machining equipment. They are available in an array of models ranging from 8-workpiece capacity to 16-workpiece capacity.
All Bock MonoQuad, MultiQuad and Hex Systems offer:
- Built-in single station adapter plate
- One piece column manufactured from high-strength aluminum
- Hardened and ground steel guideways
- Quick release reversible soft jaws
- Base plate included
- Manufacturers of bolts directly to Bock Locator Plates using DEXLOC Double Expanding Locator Pins.
- Also fits 80mm and 100mm grid patterns. |
|
gripos-5A – The NC quick-action vices for real 5-sided processing
Record-setting rapid-action clamping
Unique and patented clampingaction with mechanical force amplification. Secure clamping
with only one lever movement of max. 160°.
Real 5-sided processing
GRESSEL offers a sophisticated assortment of high support jaws, which allow an excellent use of the full play of the axis.
In middle of the machine table
Compact, no cranking, no bevel drive. Hence free positioning, even in the middle of the machine table.
Quick dismantling
Only a few components. Quickly adjusted, positioned, dismantled and cleaned.
Modular and flexible
The modularity of gripos allows a conversion into various versions and solves almost every clamping task. |
|
Bock Workholding's new Hex System is built for big time production! This 6-sided workholding system, with its 12 clamping stations, increases production capacity and reduces costs.
The Bock Hex System:
- Reduces part processing costs by machining on 3 sides of 12 parts
- Allows 120º tool access
- Increases unattended machine time and improves part throughput
- Only twin vise that allows full machining of the jaws - saving costs for additional jaws
- Quick change jaws lift off in one smooth action - no pins or special tools required
- Full jaw travel permits clamping of a larger variety of part sizes without re-machining
- The one piece aluminum column with hardened, ground steel guideways is strong & rigid yet light
- Supplier of bolts directly to Bock Locator Plates using DEXLOC Double Expanding Locator Pins. Also fits 80mm and 100mm grid patterns. |
|
The pneumatically operated Gemco Retractable Sleeves are designed for the dustless transfer of solids from one processor to another. These Retractable sleeves are available in telescoping rigid designs (usually stainless steel), or flexible professional boots, (usually white Neoprene). The telescoping models are used for one-way flows and flexible models used for bi-directional flows. The two manufacturer of pneumatic cylinders of the Retractable sleeve can be controlled locally, remotely or by automatic sequencing. Our sleeves are available in a range of finishes and coatings with a variety of stroke lengths and mounting configurations.
|
|
Precision, height adjustable, vibration damping center mounts for accurate, efficient and economical machine installation
Typical applictions: Center tools, Rubber machinery, Printing and Packaging machinery, Injection Moulders |
|
* retractable clamping rod, clamping jaw escapes from die
* horizontal clamping surfaces
* clamping force applies perpendicularly to clamping rod (no radial load)
* includes mechanical safety lock, so the die cannot drop from ram in case of pressure fail
* escaping rod prevents any jamming, even in the toughest applications, such as forging
|
|
AX / PS – Bench vices
AX, AXP and PS, precision work bench vices
Universal, powerful, rugged and smart.
The classics
Of durable nodular- or special cast iron, equipped with serrated or smooth jaws. With many accessories for all clamping work in workshop, factory or for mobile work places. |
|
SLOTTED-HEEL CLAMP STRAPS
TAPPED-HEEL CLAMP STRAPS
SWIVEL-HEEL CLAMP STRAPS
DOUBLE-END CLAMP STRAPS
DRILL-SPOT-HEEL CLAMP STRAPS
STEP BLOCKS & VICES
Forged Adjustable Clamps
Aluminum Adjustable Clamps
Forged U Clamps |
|
Mechanical clamping elements:
- high clamping forces
- high operational safety
- simple manual operation
- compact, flexible design |
|
Block Clamps
Jergens StayLock Block Clamps are multi-purpose utility clamps designed for many versatile applications. Block Clamps may be mounted for either vertical or horizontal clamping. They may be used with strap clamps or similar workholding devices for maximum adaptability (see illustration below). The Block Clamp plunger has a 1/4 - 28 thread on the I.D. for use with various contact points.
Retractable Clamps / Proximity switching
Jergens StayLock Retractable Clamps are designed to allow quick change of molds in supplier of injection molding machines and die casting equipment. The locking arm, which retracts into the clamp body for easy loading and unloading of a mold, is adaptable to clamp many standard mold slots. The Retractable Clamp is double acting and includes alternate clamp and release ports for easier hydraulic plumbing set-up. A Proximity Switch, which indicates the Retractable Clamp is in the extended or retracted position, is also available (see below). |
|
Snap-Trap clamps can be fitted in seconds, reducing installation time by up to 80% compared with some alternative systems which require the assembly of up to 12 parts. Already widely used in the Norwegian sector, the clamps are highly resistant to corrosion and comply with the NORSOK offshore standard. Just two sizes of Snap-Trap handle the spectrum of metric and imperial instrumentation tubing diameters up to 25mm/1inch, avoiding the specification, purchasing, stocking and day-to-day handling overheads associated with existing systems - which can require anything up to 24 parts to provide the same solution.
A new dedicated professional fitting tool is now available for easily opening and closing the clamp's ratchet-based clamping mechanism - improving ergonomics compared with the option of using a bolting to apply the required pressure.
Made from stainless steel, Snap-Trap is a square component with a U-shaped body and a hinged top arm. As the arm closes, it progressively grips the tubing using a ratchet-style mechanism. The flexibility of this action allows each clamp to accommodate a wide range of tube sizes. The smaller 27mm-square Snap-Trap accepts 6 to 12mm or 1/4 to 1/2inch tube sizes; the larger 47mm-square clamp accepts tubes of 12 to 25mm or 1/2 to 1inch.
|
|
Series PA Manufacturers of clamps are ideal for automated part holding, and are available in one working day from receipt of order. Five sizes and left and right rotations are available for a wide variety of tasks.
Advantages: Simple design, compact size, low weight, long life, high clamp force, available in five sizes.
|
|
SITEMA Locking units are capable of retaining forces in both axial directions. They are used in a wide variety of machines. In most versions the clamping is spring actuated, and hydraulic or pneumatic pressure is required to release it. Shaft diameters range from 10 to 250 mm. The respective holding forces vary from 0.1 to 1000 kN, depending on style and customer requirements.
|
|
SPEEDY classic - mechanically / hydraulically
- Our most complete and versatile system
- available in 4 sizes with draw in forces from 5.3 to 30 kN
- Draw in- positioning - clamping - releasing- retraction, all these functions are integrated in a single element
- best suited for full automatic solutions
- decades have proven the wide range of applicability of this zero point mounting system |
|
Glass-fibre reinforced polyamide based (PA) technopolymer. Resistant to solvents, oils, greases and other chemical agents.
The slightly concave front surface and the rear finger grips guarantee an ergonomic position of the hand, allowing the operator to apply the maximum torque with the minimum force. |
|
This product group covers mechanical clamping elements like T-Nuts, Fixture Nuts, Down-Thrust Vices, Floating Clamps, Down-Hold Clamps, Spherical Washers / Conical Seats, Supporting Elements, Centering Clamping Elements, Clamps, Locating Clamps, T-Slot Clamps, Taper Clamping Units, Clamping Clamps
The new part "Compact Clamp with moveable clamping lever" can be used for universal application - in either horizontal or vertical position - in machined and raw work pieces.
- exact and position precise clamping
- ease of operation
- high clamping force at low torques, abrasion- resistant due to clamping
lever with bearings specifications
- continuous, large clamping area
- clamping lever entirely retractable for hindrance-free exchange of work
pieces
- clamping lever with locating thread for diverse clamping elements, e.g.
ball-ended thrust screws (EH 2270. - EH 2272.), self-aligning pads (EH
2273./ EH 2274.),
- large adjusting range at constant clamping force
- easy and flexible fixing possibilities
- corrosion-resistant
- insensitive to dirt and chips. |
|
Mechanical clamping elements:
- high clamping forces
- high operational safety
- simple manual operation
- compact, flexible design |
|
Misumi is the NO 1 supplier of over 500,000 standard and customised components for Mechanical Factory Automation/Special Purpose Machinery, Professional press Dies and Plastic Mould. We delivery components europewide in averagely 6 – 8 days GUARANTEED DELIVERY from the day of purchase, stock items available from 2 days delivery.
Misumi components are different in that they can be configured to your need using our unique part coding system. Dimensions, materials and special machined requests can all be selected within the misumi system enabling engineers and designers to achieve a configured parts as standard with no extra machine costs. Standard items are also available via the catalogues.
All components can be designed using the Misumi CAD portal . Compatible with industry wide packages a designer can configure our parts at the touch of a button in up to 0.01mm, and download in seconds saving valuable design time, registration required.
To receive our extensive catalogue and save valuable time and money, visit our website or request yours today by clicking the request banner.
MISUMI – Precisely what you need. |
|
The product range Workholding includes modular T-Slot Systems (V40 and V70) and Hole and Dowel Systems (L12 and L16) for the construction of clamping fixtures.
The large standard program is available from stock. The substantial clamping element assortment is included in the standard parts catalogue. |
|
Low-profile vices come in two basic models, one with a single-wedge and the other with a double-wedge construction. In addition, we offer a line of machinable jaw models for workpieces of irregular shape and a special model for casting and wire EDM applications
Standard models come with a hardness of 48-52 HRC and the jaws are serrated or smooth, depending on model. Both the wedge and the jaws are made of tooling steel and are through hardened. Fastening operation involving one suppliers of bolt (M5-16) ensures quick set up times.
|
|
Right Angle Fixture Plates
- Hydraulic or Pneumatic clamp with Pressure or Springs
- Pressure Maintained with Accumulator
- Round or Prismatic parts
- For Horizontal machining centers
- Modular Component Designs
- Traditional Workholding Designs
|
|
Bock Locator Plates and Bock DEXLOC Double Expanding Locator
Pins serve as the foundation of your quick change workholding system. Whether using vises, modular components, or other fixturing, the Bock Locator System works well with all workholding systems.
- Repeat setups to within +/- .001"
- Locator Plates are available in a wide array of sizes, both in inch and metric dimensions.
- Bock Locator Plates are made of hard coated aluminum for a durable surface
- Alpha-numeric coded holes for an accurate and repeatable baseline reference
- Every hole precision bored to fit Bock DexLoc locating pins and threaded through for maximum versatility
- Brass protection plugs included for every hole
- Eliminate time consuming "dialing in" for every setup |
|
Each FMS vise can be vertically assembled thanks to extra keys on the base and with the use of a purpose base plate to be ordered extra (Art.827). FMS vises could be back to back or side to side or cross assembled. By the way, FMS jaws never stick out from the base.
Of course solid Multilfex visecubes bodies for Horizontal Machining centres could be also supplied as standard items, which offer the possibility to reduce the number of set up given that, they allow to machine workpieces not only on the front side, but also on their lateral sides during the same work cycle.
Specifically designed for Horizontal machining centres are cubi morsa Vise Towers or Vise Cubes: a solid structure allows, with the max rigidity, to get, in a vertical way, all the types and options already seen horizontally.
In such way all six sides of a typical prismatic workpiece can be machined in only 2 clampings. All this also increases the accuracy of the operations.
Of course even single Multiflex vises can be vertically assembled with proper reference points and supports. Vertical Machining Centres can be equipped with dividing tables in order to get the same result too (lateral sides operations). |
|
|
|
Locking elements, Clamping elements, Centering elements
