|
|
Hardinge manufactures a family of rotary products to increase your productivity.
- 5C, 16C and 3J Rotary Indexing Table Systems
- Direct-Drive A2-4 5C High-Speed Rotary System
- Direct-Drive A2-5 16C High-Torque Rotary System
- Trunnion Products
- All digital Servo Control
- Tailstocks
- Collet Closer Options
- Collets, Expanding Collets, Step Chucks, Chucks and Face Plates
Buy Collets, Collet Chucks, Chucks, Tool Holders and Rotary Products online at www.hardingetooling.com |
|
To meet the machining or assembly demands where flexibility, velocity and accuracy are requested.
- Drive with NC motor.
- Very good accuracy, no play.
- High torque capacity.
- Pneumatic clamp as option. |
|
| We manufacture tables for inspection or workpiece grinding (milling, sparkerosion, grinding, laser). |
|
- One, Two axes CNC rotary tables with vertical and horizontal positioning.
- Multiple rotary tilting table. |
|
The rotary linear BMGL indexing systems enable the user any type of division and circular milling:
Continuous rotation rotary tables, 360.000 positions.
Loading capacity up to 150 Tm.
Table dimensions up to 4000mm x 5000mm.
High rigidity and positioning accuracy rotary tables.
Hydrostatic slideways. |
|
Plate 1500x1500-1500x1750
Capacity load 12000 Kgs
Stroke 800-1000-1500-2000 mm
CN rotary and shifting table for milling operations
- W axis configuration
- Cast iron and steel structure
- Table mechanical drive through worm screw
- Slide mechanical drive through recirculating-ball screw
- Hydraulic clamping of the axis
- Hydrostatic support system of the plate |
|
Pallet 1000x1000 - 1200x1200
Portata 5000 Kgs
Corsa from 2000 to 5000 mm
CN rotary and shifting table with change pallet for milling operations
- N° 2 Palletizer station
- X axis configuration
- Cast iron and steel structure
- Table mechanical drive through worm screw
- Slide mechanical drive through recirculating-ball screw
- Hydraulic clamping of the axis
- Hydrostatic support system of the plate
|
|
The rotary linear BPTF indexing systems enable the user to make turning and milling operations:
Turning tables up to 4500mm diameter and 102 Kw power.
High rigidity and positioning accuracy rotary tables.
Hydrostatic rotation and linear displacement.
2 tandem drives configuration. |
|
Plate Ø 2500 - Ø 3000
Capacity load 20000 Kgs
Stroke 1500 - 2000 mm
Maximum speed 100 rpm
Spindle motor power 50 Kw
CN rotary and shifting table for turning and milling operations
- W axis configuration
- Cast iron and steel structure
- Table mechanical drive with gear
- Slide mechanical drive through recirculating-ball screw
- Hydraulic clamping of the axis
- Rotation with roller bearing
- Hydrostatic support system of the plate carriage
|
|
The BMGL rotary tables enable the user any type of division and circular milling:
Continuous rotation rotary tables, 360.000 positions.
Loading capacity up to 150 Tm.
Table dimensions up to 4000mm x 5000mm.
High rigidity and positioning accuracy rotary tables.
Hydrostatic rotary axis. |
|
Plate 600x600 - 800x800
Capacity load 4000 Kgs
CN rotary table for milling operations
- Use to vertical axis
- Cast iron structure
- Mechanical drive through worm screw
- Hydraulic clamping
- Hydrostatic support system |
|
Applications
For NC angular indexing, variable positioning or rapid response variable rotational speed requirements. Speeds range from very slow up to 500 rpm. The high accuracy and loading capacities make this range suitable for both machining and metrology applications.
Bearing
Axial-radial roller bearings provide high rigidity in both planes. Sensitivity and fine positioning are ensured.
Clamping
Distortion free system.
Measuring systems
High precision Heidenhain angular encoders are standard.
Motors
Powered by synchronous AC direct drive motors. The rotor is formed by the platen and the stator in the base unit. The drive technology provides superior stiffness due to backlash free transmission.
Construction
The modular design provides freedom to satisfy application variations, including horizontal or vertical axis arrangements. High grade sealing and effective power cooling system are incorporated. |
|
Rotary Precision Instruments family of rotary tables offers unsurpassed flexibility and the highest possible freedom of variation within a standard unit assembly system. With a worldwide reputation for quality, reliability and longevity RPI incorporate the Eimeldingen UK, Airmatic Engineering, OMT and Horstmann rotary table products.
|
|
Plate Ø800-800x800-1000x1000
capacity load 4000 K
CN Rotary table for milling operations
- Use to vertical and horizontal axis
- Cast iron structure
- Mechanical drive through worm screw
- Hydraulic clamping
- Hydrostatic support system
|
|
- Cast iron alloy housing (IT 50-75-100 aluminum alloy)
- Large output dial mounting surface supported by oversized
tapered-roller bearings
- Stationary through-hole center post
- Maximum station-to-station accuracy
- Double extended cam-shaft
- CNC hardened cam-profiles
- Oscillating and customized complex cam-motions available
- Oil bath lubrication
- Appropriate seals prevent oil leakage in any working position
- Can be fitted with reducer and drive |
|
Description
Advantages TO model with direct motor:
* highest dynamic
* Angle of rotation and velocity are freely programmable
* direct load connection
* no mechanical moving parts
* no oil filling - cleanroom capable
* electronic overload protection
* high-precision bearing / highest repeat accuracy
* fixed centre piece / holow shaft (big central bore)
* free from backlash
* pre-finished module
* nickel-plated steel parts
* low noise |
|
Plate diam. 800 - diam. 1000
Capacity load 4000 Kgs
Maximum speed 120 rpm
Milling and turning CN rotary table with direct drive. |
|
Hardinge DIRECT-DRIVE Super-Precision Rotary Systems offer high-speed
positioning and rapid bidirectional response.
Features and Advantages of Direct-Drive rotary systems:
- Direct-drive, rare-earth permanent magnet torque motor
- No mechanical gearing, fewer parts to wear
- Zero backlash, high servo stiffness
- Rapid bidirectional response
- Wraparound motor for smaller footprint
- Super-Precision positioning accuracy and repeatability
- Rugged cross roller bearing for high-moment loads with super rigidity
- Integrated axis capability for operation at maximum machine capability - full use of high-speed machining and machine's "Look-ahead" programming
A2-4 5C high-speed model features 3600-degrees per second indexing speed. A2-5 16C high-torque model also available. Collet-ready spindle accept collets, expanding collets, step chucks, power chucks and slotted face plates.
For more information call 800-510-3161.
|
|
Rotary table RT3A 100x100:
- Rotary table with integrated direct drive
- high rigidity
- highest accuracy
- optimal speed ability
Rotary table RT3A 150:
- Rotary table with integrated direct drive
- high dynamics
- highest accuracy
- small height
Rotary tables RT3A 200:
- Rotary table with integrated direct drive
- high dynamics
- highest accuracy
- small height
Rotary table RT3A 600:
- Rotary table with integrated direct drive
- for increased r.p.m. and driving torque rate
Rotary table RT3G 630:
- Rotary table with integrated direct drive
- for dynamic and precise positioning
- high load capacity
Rotary table RT4A 400:
- Rotary table with air bearing
- with integrated direct drive
- low overall height
- for high accelerations and r.p.m. |
|
A wide range of cam indexing tables working in bath oil, to ensure a smooth and quick movement.
- Number of stops : 2 to 24.
- Wide range of mecanisme according to inertia.
- Good accuracy.
- Through hole
- 3 drive mouting possibilities.
- Torque limiter : yes.
- Can use with MCPI command card : No maintenance of the motor brake, no risk of damage in case of emergency stop.
|
|
MDS for Spark erosion :
Permanent-electro magnetic chucks for EDM machines.
It's equipped with dedicated washing channels.
Steel/brass surface for high reliability in time.
Cubotec for horizontal milling :
Now with Cubotec all advantages given by Super-Quad chucks are combined with the flexibility of a system designed for horizontal spindle machine tools.
With Cubotec it's easy to fix pieces with different shape and dimension, as well with surfaces bigger than clamping area, using the full strokes of the machine.
Radial-Pole for turning :
Permanent-electro magnetic chucks for turning operations.
The PR/S model is dedicated to grinding and finishing operations.
PR/H version for heavy turning operation.
No machining vibrations - full machining in a single setup. |
|
This universal workholding chuck offers maximum effective holding on the widest range of workpiece shapes and sizes. Its effectiveness is considerably enhanced by the new low profile feature, which adds more head room under the wheel. Only 3 1/2" in height, this new low profile interloc is 1 1/8" shallower than the conventional Walker Interloc and a full 1 1/2" less than competitive units of the same type. This savings in height permits greater flexibility with added head room under the wheel to position the work or handle bulkier pieces. This results in savings in set up time and added productivity. It also reduces the chuck weight by 30% or more.
The low profile is achieved with no loss of strength, precision or holding power. With the unique Walker Interloc design, more than 75% of the chuck's surface is major north or south poles, making it easier to locate workpieces without concern for locating poles. There is no wear loss due to the shallower polarity pattern in the replaceable top plate. |
|
The "RIGIDIAL" Indexing Tables are mechanisms used to transform a uniform rotary input drive into a series of equal output motions.
The Indexing plate is supported by a large diameter crossed roller bearing that can withstand considerable axial and radial forces, while retaining high levels of accuracy and rigidity.
The globoidal, nitrided or hardened and ground cam, ensures excellent wear resistance, and the pre-loaded cam followers provide accuracy in positioning.
These tables have been designed to achieve optimum performance at a very competitive price.
RIGIDIAL is available in five versions: RIG04-RIG06-RIG09-RIG19-RIG25, that allow transmitting torque from 93 (Nm) to 7.500 (Nm), with the number of stops ranging from 2 to 32. |
|
Plate 1000x1000 - 1200x1200
Capacity load 7000 Kg
Stroke from 1000 to 5000 mm
CN rotary and shifting table for milling operations
- X axis configuration
- Cast iron and steel structure
- Table mechanical drive through worm screw
- Slide mechanical drive through recirculating-ball screw
- Hydraulic clamping of the axis
- Hydrostatic support system of the plate |
|
The Key Advantages;
Application
Rotary tables specifically developed for use on metrology applications and co-ordinate measuring machines (CMM), when fast, accurate indexing between pre-set positions is required.
Construction
High grade stabilised cast iron base and rotary platen ensure rigidity and precision.
Bearing
Precision ball bearings supply axial and radial support during the indexing cycle.
Clamping
Hirth teeth coupling to provide positive location of tabletop with a failsafe clamp.
Measuring Systems
Angular accuracy is achieved vis Hirth Coupling location, feedback can be provided by basic encoder.
Motors
Various motor types available.
|
|
The RT series of rotary tables are heavily ribbed from cast iron and welded construction. These rotary tables can be attaching to horizontal boring and milling machines controlled by CNC.
We can provide these rotary tables in version with 3-axes CNC (Tilting rotary tables). |
|
|
|
Rotary indexing tables, Magnetic plates
