|
|
Omlat has planned and realized a line of electrospindles for glass working.
Here under we list the main characteristics of these electrospindles:
- Lenght: L=567 mm
- Max Speed: n 14.000 min-1
- Max Power (S1/100%): 8 kW
- Max Torque (S1/100%): 12.7 Nm
- Lubrication of the Bearings: Grease
- Tool Clamping: ISO 40 with pneumatic clamping
|
|
Omlat has planned and realized a line of electrospindles for granite and marbles/working.
- Lenght: L=557 mm
- Max Speed: n 10.000 min-1
- Max Power (S1/100%): 15 kW
- Max Torque (S1/100%): 24 Nm
- Lubrication of the Bearings: Grease
- Tool Clamping: BT 40 with pneumatic clamping
|
|
We offer a wide variety of Multi Spindle Drill Heads. All BERGER Multi Spindle Drill Heads will offer you high use value.
The Advantages of BERGER Multi Spindle Drill Heads
- simultaneous drilling of two or more holes in one operation (drilling, countersinking, thread cutting or reaming ...)
- extensive reduction of machining time
(= reduction of unit costs, increase in production capacity, reduction of production time) |
|
A major enhancement to our range of units, mutiple-spindle heads and angular heads are available to increase production cycle efficiency and reduce machining costs. Su-matic products, in both standard and special versions are well suited to fit our standard MAX units for an effective production solution, or can add efficiency to your CNC machining center. Profit from your investment in record time with the Production expert.
|
|
These units are available in three sizes, LBL25, LBL35 and LBL45, each size covering a specific diameter range, totally up to 20 mm in steel. The basic units can be fitted with different chucks, twin heads for simultaneous drilling of two holes and attachments for chip removal and tapping.
Highly dependable - LBL drilling and tapping units feature quick and precise clamping, making them highly dependable.
Easy to build together - Several holes can be drilled in a single operation since several of these compact units can easily be built together.
Low noise level - The units have a low noise level as the exhaust air is discharged through silencers inside the protective casing.
|
|
This very compact BE22-series of E2 drilling units comes in a wide range of speeds, with multi-spindle heads and a several different chuck alternatives.
It's sturdy designe secures a long life of precision drilling. |
|
These drilling units provide spindle rotation and thrust operated by utilizing compressed air.
Pneumatically driven, this unit can be used without the need of electrical wiring. |
|
High-Speed Jig Grinder (Air System) :
- Suitable for internal grinding jig borer, jig milling machine and lathes.
- Can be used for the high-speed rotating portions of various kinds of special purpose machines. |
|
Robot deburring solutions
Intelligent solutions to save time and costs
Have a look at our Videos !
As insider, you know that being at the cutting edge of automation is crucial in special machine construction. When installing pneumatic spindles and build-in motors by MANNESMANN DEMAG Drucklufttechnik KG , you can be sure that state-of-the-art technology, maximum reliability and serious top-rate quality will bring the key advantages to your automation
process.
Robot tools for deburring
Our product range offers tailor made solutions for fettling and deburring of different materials. The cutting-edge programm offers problem solving solutions like
- High revolution speed deburring and grinding spindles for robots
- brushing motors for robots
- filing tools for robots
- countersinks for robots
- angle -countersinks for robots working in difficult to access areas
- angle grinders and angle brushing motors for robots
- grinding spindles with compliance for robots and CNC machines
The revolution speed range varies from 100.000 to 120 rpm.
Call us now!
Besides a wide standard product range we offer innovative customized solutions with different revolution speeds, turning directions and power ranges upon request. |
|
Constant high speed and torque under load, make this series ideal for robotic finishing or milling metals, or cutting plastics, ceramics, composites or wood.The HD Series incorporates heavy-duty bearings within a ridgid stainless steel housing which may be fixture mounted easily.
Units generate up to 1.4 HP with governed constant high speed and no gears or vanes to lubricate or repair. These reliable motors have fewer moving parts and need fewer repairs. Cleaner cutting action, more IPM's. A light and compact solution with low vibration and weight. Oil free and maintenance free operation. |
|
Faster Production - spindles operating at constant speeds from 25,000rpm to 90,000rpm up to 1.4HP, maintaining constant high speed under variable load with no gears, vanes, or brushes.
Over 40 spindles - easily mounted, maintenance free, requiring no lubrication, provide a finer finish and faster feed rates.
Patented low vibration, super quiet, oil-free, direct drive spindles for faster production and greater durability. Integrated CAT, BT, HSK, and DIN toolholders available for increased accuracy. |
|
SMS Series :
-40,000 min-1 Max.output 60W
-Up to 4mm shank tooling can be used
-Ultra-Precision, Angular bearings to maximize rigidity
Bantam Series :
-BANTAM150 Max.15,000min-1 Max. Output 132W
-BANTAM250 Max.26,000min-1 Max. Output 105W
HTS series :
- Negligible spindle expansion
- Very High Feed Rates are possible
- Spindle Accuracy is within 1 µm |
|
MS Series Motors
Features
In spite of the small body diameter, high output power is achieved.
The outer housing is made of stainless steel(SUS416) with a high-accuracy,ground finish(0/-0.01mm)
No heat is generated for long continuous use due to air driven operation.
By mounting a silencer on the back-air tubing, the quiet operation of air turbine is remarkably improved. |
|
Roscamat 500; Capacity M2-M24 (M27)
As regards performance unit R-500 can be considered identical with unit R-400, with the advantageously bigger working range thanks to the longer arms.
The machine consists basically of the following elements: radial arm, lockable elbow joint, tilting arm and head. The compressed-air motor is coupled to the latter. Through the foot and by means of three M8 screws the machine can be fixed to a table or workbench. Such attachment can also be obtained by means of a simple clamp.
The radial arm and the tilting arm revolve about themselves. The latter tilts therewith always maintaining the perpendicularity to the foot reference plane.The machine incorporates an air servicing unit (filter + regulator lubricator) for the correct operation of the motor.
The modular system consisting in a series of 7 quick-change modules (reducers) is provided for coupling to said motor. As a result of this 7 output speeds (90, 170, 300, 550, 750, 1050, 2100 rpm) are available thus allowing to adapt the tap speed to every type of thread. The handle allows to balance the tilting arm and to position it at the operator's convenience.
The modular system admits the quick-change tap holders with or without safety clutch depending on the intended job (blind or through holes).
Threading capacity from M2 up to M24 (M27).
|
|
Roscamat 200; Capacity M2-M14 (M16)
This machine consists of a pendular parallelogram that is balanced by a pneumatic spring, plus a radial arm.
The gas spring and radial arm assembly fixes the motor head and keeps it perpendicular to the working area. The motor is equipped with a quick-change system and is rotated by compressed air that has previously been filtered and lubricated by a unit for that purpose.
Taps and shank tooling fit to the motor's quick-change system by means of tapholders.
|
|
- Turret rotation via digital AC-servomotor. Precision locking with Hirth coupling. Pneumatic pressure suitable for milling.
- The solid and robust turret head ETR36 is designed for inline or crossway installation on slide unit UA5, or CNC 3-axis module TRIAX4 (see page 5.8) using base plate PB 36. section 6.
- Hollow shaft toolholder HSK 50: see section 7, page 7.5.
- Options: Coolant through spindle, other servomotor, other types of spindles, adaptation for multiple spindle heads and angle heads. |
|
Self Cooled electrospindle: what does it mean?
It means that OMLAT has studied and realized a new product starting from the electrospindles of the world known and world appreciated Delat line and adding a very important innovation.
there is no cooling system for the electric motor of the electrospindle, neither water cooling nor air cooling. This type of electrospindle can be installed and used very easily and it suited for applications where the working cycles must not be very long, even if the electrospindle is used for 24 hours per day.
The internal structure of this new product is the same as the strusture of the water cooled DELTA electrospindles, but it is equipped with a special electric motor that is proper for this use. thanks to the combination of these characteristics OMLAT has created a new type of electrospindle that is cheap and can be easily used, but at the same time it maintains the power, the speed and the reliability of all OMLAT products. |
|
For High-Production CNC Tapping Without Machine Reversal.
Constant Speed Tapping relies on the compact tapping head to provide tap
reversal. The machine spindle runs in one direction at the exact programmed speed and reversal occurs within the tapping head instantaneously upon machine retraction. Avoiding the RPM fluctuations,common to machine reversal tapping ensures these benefits:
Reduces Cycle Time.
Increases Tap Life.
Improves Thread Quality.
Eliminates Reversal Related Machine Wear & Tear.
Reduces Energy Costs. |
|
E6040 Series Max Output 600W
Features
2,000-40,000 min-1, 500 min-1(for centering)
Maximum cutting tool shank diameter of 6mm can be used.
Spindle Accuracy 1µm or less
Available for small diameter milling and drilling, slitting, chamferring and grinding.
EMS-6040K has superior motor cord flexibiliy for Robot applications. |
|
| Chumpower is a manufacture in Taiwan. We develpe and research for the Spindle Grippers. They are the crucial part in the spindle. Therefore, we developed the Spindle Grippers for customers. You may review our PDF catalog for detail information. We are also available on custom-built product. Please feel free to contact with us. |
|
All pneumatic drilling unit in a stainless version for tough environments like Water Jet machines (starting hole when cutting soft materials).
This very compact drilling unit is naturally also offered in ordinary steel. |
|
TA With Tension-Compression & Quick-Change Spindle
APPLICATION
For CNC Machining And Turning Centers
Or Conventional Lathes And Mills.
FEATURES & ADVANTAGES
Tension/Compression Compensation: Provides greater thread accuracy and higher production rates.
Hard Start: For accurate depth control.
Front Release: If tension is accidentally over extended, adapter is released. Prevents damage to tap or workpiece.
Short Length: For limited space.
Tap Holding: Accepts Quick Change Tap Adapters |
|
A new way to conceive the power unit of the lathe for high production and precision applications. The new technologies of manufacture of the motors allow obtaining many copies in a view lot of volumes.
As an option may be requested parking brakes, which are used to block the chuck axis either during the working or for safety purposes, when the operator replaces the worked piece.
To guarantee the best results of cooling and homogeneity of the structures we use the technology of the cooling lead-in on the outside of the motor. |
|
Tilting heads for milling with possible inclination of ± 92°.
6 different models complete of electrospindles with capacity from 3 KW up to 56 KW.
All models are equipped with a high efficiency hydraulic clamping system and high resolution encoders direct mounted in axis assuring perfect positioning and absolute repeatability.
The heads can also be supplied fitted for electrospindles of your choice.
Our technical department is at your disposal for personalized studies in order to make the installation on your machine tool easier. |
|
|
|
Spindles, Motor-spindles
