|
|
Fischer Precision Manufacturers of spindles offers a large variety of MINIMODULAR SINGLE AXIS HEAD cover Milling, drilling on four and five axis machinery up to 40,000 rpm using continuous or indexed rotation, and 24 kW of output power.
|
|
Peiseler spindle positioners are available as NC units with backlash adjustable split worm drive, or direct drive. The spindle positioner is available in a single or two axis design. The spindle positioner can be adapted to a variety of commercially available suppliers of spindles. The high quality Meehanite-casting, distortion free axis clamping, manifolds with hardened steel shaft running in bronze bushings, as well as the appropriate selection from several types of high grade manufacturers of bearings, assures the highest possible precision. Diverse gear ratios or gear reducers allow for the optimal adaptation to any load condition. The use of very accurate industrial measuring systems in combination with a high mechanical accuracy, results in only a few seconds of arc positioning deviation. The robust design enables simultaneous four or five axis machining even under heavy machining load. Special spindle adaptation can be designed to meet customer requirements.
Please request our comprehensive catalog.
|
|
We provide a broad range of ultra-precision linear translation stages, rotary supplier of spindles, and spin stands. These products are available with a variety of drive and feedback devices from leadscrews to linear motors, and optical encoders to professional laser interferometers.
If you have a motion requirement that requires more than a standard product solution, contact Danaher Motion. Let us put our experience to work for you in developing a system to meet your performance and budget requirements.
Wafer Spindle
High throughput - acceleration to 6000 RPM in 1 second
Thermally stable design - cooling fins for high duty cycle
Clean operation air-bearing with integral vacuum for wafer professional chuck
Revolution XL Spindle
Conductive path architecture
High stiffness design
Low jitter professional encoder
Low Asynchronous Error Motion (AEM)
Crash-proof technology
Lifetime warranty
|
|
1. Spheroidal Cast Iron.
Greatest absorption of vibrations, low thermal expansion, very good dimensional stability, high tensile strength.
2. Solid main input shaft (one integral piece with the drive taper) case hardened and ground.
Better rigidity, resistance to stress and power output.
3. Shafts supported by sets of super precision pre-loaded angular contact bearings supplier with Long Life grease lubrication and ABEC 7 accuracy rating.
This location of bearings gives a great rigidity to the head allowing the shafts to extend following the increase in temperature without loosing rigidity and damaging the pre-load of the bearings.
4. Spiral bevel pinions in a higher performance materials with a strength in excess of 300 kg/mm2 used in the F1 racing, aerospace and military fields.
Concentration of high power capacity within a confined space.
5. Computerized computation of the data of the set gears.
In order to have more than one tooth working during mesh so that more power can be transmitted and longer gears life, better meshing of the teeth during rotation and, as a consequence, almost no noise.
6. More than 40 Angular Heads types
availabe. Widest range of applications on machines and work-pieces with particular overall dimensions and shapes.
7. New types of Angular Heads with reduced weights and overall dimensions.
The smallest type able to enter a hole of only 30mm, while the huge one able to give a 250 Nm output power.
8. Double seal on the front (manufacturers of mechanical seal+gasket). Better protection of professional seals and internal parts from coolant infiltration in order to increase the Angle Head working life.
9. Coolant feed through the collet collet (option). For specific applications which require it such as: working operation from 10 upto 70 bar (dry or wet running).
10. Coolant feed through the manufacturers of spindle (option).
For specific applications which require it such as: working operation upto 10 bar (dry or wet running).
11. Ceramic ball bearings, special seals and balancing of each part and component (optional).
In order to reach High speed ratio upto 12000 rpm.
12. Aerospace external finishing.
Reduced weights and overall dimensions.
|
|
Sentry Line
Sentry is our standard building-block spindle and is offered as a low-cost solution for applications that call for a precision, high performance, and quick delivery in a standard “inch” design. There are 6 standard Sentry spindle models. All models are grease lubricated and designed to deliver years of trouble-free performance.
ProMetrix Line
ProMetrix is our customizable belt-driven spindle line. Offered in 10 standard sizes ranging from 40mm to 200mm, ProMetrix manufacturers of spindles are available is Block, Cluster, and Cartridge designs and can be configured to include most any option to meet application needs. The ProMetrix spindle line is designed around a pre-engineered “metric” design that takes the guess work out of manufacturing a custom spindle. From a customer’s viewpoint, pre-engineering allows us to design and manufacture a custom spindle in less time, with less cost, and highest reliability.
4000 Series Line
4000 Series spindles are line is SETCO’s most comprehensive line of belt-driven spindles. The 4000 Series is offered in three spindle designs for Boring, Milling and Grinding applications. Each design is unique to their application and all feature heavy duty construction to maximize performance. The SETCO 4000 Series spindle line is offered in standard and customized designs and can be configured to include a large variety of options.
Grinding Spindles
SETCO offers many types of OD and ID grinding spindles. Intended as replacement spindles on Springfield and Campbell professional grinders, internal grinding cartridge spindles were designed to convert vertical turret lathes suppliers and boring mills to manufacturers of grinding machines. Today SETCO precision grinding spindles are versatile and used for a much wide range of new and retrofit internal and external grinding applications.
Custom Precision Spindles
SETCO manufacturers the most reliable spindle in the world, this includes standard and custom designs. Our reputation speaks for itself as we build spindles for applications all over the world. SETCO is the home of Pope, Master, Whitnon spindle designs, and has more spindle designs than any manufacturer.
If you would like to discuss your project we are here to answer questions and help you select the right spindle for your project. |
|
E2 products are known world wide for their quality, durability, precision and power. Each series of E2 units are the most compact in the market today.
E2 has a wide range of boring units widely used in all kinds of applications.
E2 customers benefit from the high quality of the E2 product line with less down-time and reduced operating costs. The compact design of the E2 units together with a good service of CAD-drawings/-models makes the design of the surrounding machine more convenient.
E2´s concern for the worker and his environment is evident in all E2 products. Low noise levels and non-lubrication features eliminating oil mist in the air is a common denominator for the E2 product line.
E2´s self feeding units utilizes a build in hydraulic feed control system. They combine precision with power enabling high precision also in multi-spindle head applications. The extremely compact Air hydraulic drilling systems cover your need when drilling smaller holes. E2´s electro-pneumatic and - hydraulic units are to be used when more power is needed. You will still have the E2 durability and precision. The E2 product line also includes non-feed pneumatic units. |
|
The OMAX Professional drill Attachment permits reliable piercing of laminate and composites prior to abrasive waterjet cutting.
The OMAX Drill accurately pierces small diameter holes in thick material.
Reliable piercing of composites and laminates
Standard Features
One-fourth horsepower, totally enclosed professional fan cooled 90 Volt D.C. motor. Motor controller requires 110 VAC single-phase power.
Motor, direct drive to supplier of spindle is fully adjustable to a maximum of 6000 RPM at the reaming.
Drill is equipped with a 1/16" diameter collet (maximum size collet is 1/2")
Fully-adjustable pneumatic feed with up to 3 inches of travel and 300 lbs. of thrust with 100 psi air.
Automatically controlled by OMAX PC-based control system
Note: The Drill Attachment may reduce X,Y, and Z travel slightly. Contact OMAX for specifics. |
|
Unit of perforation to multiple mandrels with controlled advance
|
|
E2 Drilling units range from extremely compact pneumatic units to power packs with electrically-operated supplier of spindles and integrated hydraulic system.
Depicted above is E2's BE48-series of Electro-Pneumatic Drilling Units. Please check out E2's website (www.e2systems.com) for comprehensive information on the whole E2 product range.
E2 units are easy to install as well as use, and have functions such as quick advance, controlled working feed, multi-wall drilling and chip removal. Most are available with multi-spindle heads.
E2 drilling units can be found throughout the world wherever a high level of productivity and precision is vital. A long service life with excellent reliability and continued precision makes E2's drilling units a good investment. |
|
- MAX 3 F machining units are equipped with a 3-phase electric motor and can be used in single-purpose applications.
- Integrated pneumatic feed and hydraulic brake-cylinder assembly for rapid advance and feed control
- Standard electric limit switches suppliers.
- Rigid cast-Iron housing.
- Precision angular contact manufacturer of spindle bearings suppliers.
- Slim design. High performance to size ratio.
- Variable spindle speed combinations with interchangeable push-on pulleys. See speed selection table.
- The machining unit MAX 3 F has been designed for continuous operation of max. 18000 RPM with frequency converter. |
|
Global Selfeeders are professional drill units designed and built to maintain high accuracy and high durability in the most demanding applications.
These units were developed on the forefront of holemaking technology in order to meet current requirements of high speed, high accuracy and lower cost for world-wide markets. |
|
Ever increasing demands on Cnc turning centers require these machines to perform secondary operations such as cross drilling, milling to avoid rechucking of the workpiece. Live tooling when fitted to an adequately designed turret can fulfil this requirement.
Alberti is once again a pioneer, offering a wide range of live tools that incorporate the same hallmarks of quality, performance and reliability as the world renowned angle heads , with after sales service.
Alberti works with some of the most important turning manufacturers and distributors world wide and offers standard designs of live tools for many CNC lathes.
Shafts supported by double ball bearings manufacturers at the front and one at the rear;
Spheroidal GS 600 cast-iron body;
Case hardened steel housing with ground bearing manufacturer bores;
Compact overall dimensions and weight;
Higher performance than similar products on the market;
Heat treated, precision ground components to improve performance;
Ability to professional tap with the use of axially-compensating collets. |
|
| The JAURE suppliers of spindle coupling are designed to fulfil the requirements of transmitting the maximum torque possible while operating at a specific angle of misalignment between driving and driven equipment. |
|
Gear-driven Spindles
SETCO offers several styles and models of Gear-driven Spindles. These spindles are available in parallel and right angle configurations and choice of standard reduction speed ratios.
4200PG Series
4200WG Series
RM Series
For heavy duty boring and milling applications.
- Optional gear ratios
- Block design
- Parallel & Right angle gear configurations
-High torque & low speed operation |
|
Grinding electro-spindle for operating manufacturer of grinding wheels of big dimensions.
A lot of our electro-suppliers of spindles are fitted with a feedback, which may be of simple type (type of a phonic professional wheel) or of high resolution to use the same as a rotating axis.
The electro-wheel spindles are fitted with prearrangement for the spindle balancer with a central hole for the passing of the connection professional cable. |
|
Drake Smart Supplier of spindle™ technology is available for both internal and external grinding units.
Advantages of Drake's new Smart Spindle™:
- Significantly reduces set-up time
- Improves accuracy
- Drastically reduces scrap
- Improves quality
- Automates process of finding the dresser
- Reduces chance of professional wheel damage and crashes
- Enables the grinding wheel manufacturers to act as a precise probe
Since the program was designed for your exact parts, such factors as dressing forms, grind paths and spindle and work RPM are all pre-calculated and stored in memory, so programming is basically complete. |
|
FPS provides standard and customized spindles manufacturers for all milling, drilling, turning, ID/OD grinding, stone grinding, wood and plastic machinery applications. By integrating leading European product lines, our off-the-shelf spindles cover belt-driven to motorized spindles up to 120,000 rpm, and 100 kW of output power.
The FPS engineering resources develop - and private professional label, custom applications to suit the specific needs where standartisation is not an option. From AC servo, variable frequency, to brushless dc motor manufacturer driven spindles - FPS offers the right product for your application. |
|
Integrated solution for the new grinding machine suppliers including the rest and movement of the piece; it allows the manufacturer of the machine to gain in convenience of installation and space at disposal of other functions.
All the electro-spindles are provided with professional barriers against infiltration of dirty and coolant of the working obtained by the combination of labyrinths and pressurizations with compressed and filtered air.
Where it's possible the electrical professional connections to the machine are carried out by means of manufacturers of connectors, which guarantee an absolute
impermeableness and convenience of connection. |
|
|
|
Spindles, Motor-spindles
