|
|
|
|
|
|
Kumex® launches the new and innovative range of TBK-3 planetary brushes
A completely innovative concept that incorporates in a single support all the conventional anchorings on the market.
Their careful and elegant design makes it possible for our TBK-3 brushes to be used at any deburring station.
They all have a revolutionary marking system that makes it possible to identify the filament grit in an easy, reliable way.
It is available in different diameters: 190-180-165-150-130-120-100 mm.
All our brushes are mounted with Kebblax-DIA® diamond filaments, Kebblax-DIAKK® diamond mixed with ceramic filaments and Kebblax-SIC® Silicon Carbide filaments.
Our Kebblax® filaments are manufactured with top quality 6.12 nylon, which, together with special additives and the right treatments, allow us to obtain completely innovative results, giving our brushes significantly higher technological value.
All Kebblax® filaments are produced in our development division, Kumex-Filaments®, whereas the supports are developed and produced at Kumex-Plastic-Systems®
This makes it possible to offer full control of the process and quality of our items, keeping us at the forefront of our industry.
Think no further, and enter a new world of possibilities with a world leader!
Kumex Group®
|
|
Type T4
HT-Abrasive-Filament-Planetary-Brush
Bundles of abrasive filaments anchored in a synthetic core; an engineered brush profile allows for a very exacting and homogeneous deburr or edge rounding of part, no brush run-in-time required (minimum cycle times), increased brush longevity compared to the standard abrasive disc brushes (Type T40). For use in conjunction with type T3 satellite-brushes
|
|
Short description:
These tools are designed for manual and automated finishing machinery used in extrusion, automotive, powdered metal, fineblanking and other industrial deburring applications. The smaller diameter brushes can be used on hand tools for the surface preparation of a variety of materials. Our stock brushes include diameters from 3" to 27". We also have the capability of providing customized products for a wide variety of applications.
|
|
Circular Discs
These brushes are especially used for cleaning, polishing or deburring. Their applications are best suited to the treatment of metal, for the cleaning of large surfaces, as used in the construction industry. The body is made of either plastic, wood or metal. The filling material may be chosen according to the task requirements. The density of the filling material can be varied by the diameter and the distance of and from the hole.
|
|
|
|
|
|
Model TBF abrasive brush
Abrasive brushes mounted on resin supports.
Ideal for clients looking for more aggressive, durable brushes.
The TBF system is designed to provide the brush with perfect harmony between durability and flexibility.
The studied diameter of our bundles, combined with the right inclinations and degradations provide our brush with perfect adaptability to the contour of the wheel rim, brushing its entire surface perfectly, including the corners of the hard-to-access windows.
Our TBF system is especially recommended for companies that have large production lines.
The brushes are supplied in different types of anchoring, depending on the needs of each client.
In addition, given the high quality of the filaments used, the brush is very long-lasting, avoiding unnecessary changes and stops in the machine.
Think no further, Kumex TBF brushes are the best choice for high quality production...
Available for wheel rims with the following diameters: 13" - 14" - 15" - 16" - 17" - 18" - 19" - 20" - 22"
Also produced in maximum density for the external part of the wheel rim.
|
|
|
Disc brushes are among KULLEN's most interesting products. They are used in industry as a rotating tool. Their quality is as reliable as the dependability of our choice of the right disc brush for your requirements. We guarantee this by manufacturing them on semi-automatic and automatic CNC machines. In addition to quality, we assure you of individual treatment - quality is inplicit and as you need we produce individual brushes for you. Disc brushes come in a wide variety of plastic, metal and wooden cores and bristle materials.
|
|
|
|
|
|
Abrasive nylon disc brushing tools are ideal for deburring, polishing, finishing, cleaning metal surfaces and machined parts. Custom designed abrasive nylon disc brushes to meet the specific requirement for your application.
Disc Brushes Information
Abrasive nylon disc brushes are the latest products custom engineered and manufactured by Tanis Incorporated to meet our customer’s specific requirements. Disc brushes are made with metal back strip brush construction to achieve greater fill density. The increased density increases the aggressiveness and life of the product to maximize more parts per brush. With custom manufacturing, Tanis Incorporated abrasive nylon disc products are suited specifically for the application to reduce cycle times and eliminate secondary labor or machining operations.
Tanis Incorporated manufactures disc brushes in diameters ranging from 4” to 20”. Silicon carbide and aluminum oxide abrasive nylon filaments are available from 46 to 600 grit. The aggressive fill density, individual filament and desired trim length provide conformability to deburr, polish and finish complex parts. Disc brushes are designed to be power driven on CNC machinery and custom-designed machines used in automotive, extrusion, fine blanking, powdered metal, steel processing, woodworking, concrete and other industrial deburring applications. Smaller disc brushes can be used on hand tools for surface preparation.
Common Applications for Nylon Disc Brushes
|
|
Short description:
The abrasive fibers in Abtex end type tools are anchored into a metal base by means of a unique polymer resin. The vertical, rather than flared; fiber orientation allows the brushing action to be more precisely controlled.
|
|
Abrasive grit impregnated into the extruded nylon filament allows an abrasive nylon brush to perform deburring, edge blending, and surface finishing. These brushes are available in a variety of styles including wheel, cup, end, mandrel mounted, and cylinder.
Use the Abrasive Nylon when you have threaded bores, uneven O.D.'s or simply need a lighter finish.
|
|
SIC and Diamond Abrasive Brushes for aging and burnishing of marble, granite, agglomerate, ceramics and stone in general.
Our vast range of products includes all market formats, and we are prepared to develop any of our clients’ demands.
At Kumex®, we offer the right balance between quality and price, supplying practically 80% of the European market.
We not only offer our clients a wide range of products, but also the possibility of developing exclusive products for very specific needs. To do so, we put at our clients’ disposal our extensive experience in the finishing industry and the cutting edge technology of our machinery.
Enabling us to manufacture our products, we have the market’s most advanced materials and cutting edge technology.
We can produce brushes with Diamond, SIC, Stainless Steel, Ceramic and our innovative Coex-R® filaments.
To know more about our filaments, diameters, geometries, percentages, etc., please consult our filaments section, in the products section.
|
|
|
Abrasive nylon small wheel brushes are used on both hand tools, drill presses and automated machinery. These small wheel brushes improve the surface of small parts and metal surfaces in a variety of deburring and finishing applications. Wheels are made from 1” to 4” in diameter with filament grits ranging from 80 to 500 grit. Wheel brushes are available in silicon carbide or aluminum oxide filaments.
|
|
|
Cubitron™ abrasive provides high cut while the flexible plastic brings superior cleaning to a wide variety of surface areas, without damaging the work piece. Eliminates flying wires common with traditional wire brushes.
|
|
Mink disc brushes (TEB) – An infinite variety of forms, sizes and materials
Mink disc brushes are finding use as exceptionally versatile tools in countless industries. Whether you apply them for cleaning, for the deburring of injection mouldings or metal workpieces, for sealing or for polishing, your imagination – and that of our consultants – is the only limit. We can draw on our experience in producing some 15,000 different disc brushes, with body diameters of 8 to 1,100 mm. Whatever your problem, we can solve it. And small quantities are no obstacle.
Advantages:
• Recommended for difficult washing and cleaning jobs
• Excellent for deburring and surface treatment
• Highly effective as sealing elements and as components of gliding and carrying
|
|
F
Wheel brushes can be used on angle grinders and on
stationary machines.
There are following different models:
Knot Wheel Brushes
Knot wheel brushes for grinders, angle grinders and stationary machines used in the preparation and reworking of bolt fillet and butt welds. They remove scale, rust, paint, slag, rubber residue and can be used for deburring.
Pipeline-Brushes
Lessmann-Pipeline brushes are specially developed for professional use on U-and V-welds in the pipeline industry.
Wheel Brushes with crimped Wire
Wheel brushes filled with crimped wire are used for the purpose of obtaining different surface finishing: the removal of rust, paint and dirt, for roughening, deburring, stripping or polishing.
|
|
Shorter operating times and very even edge blending.
Particularly suitable for deburring of:
- machined surfaces
- sintered products
- stampings and mouldings
- diecasted parts
- cylinder heads
- motor units
- hydraulic parts
- pneumatic parts of different geometries and materials
|
|
When circular brushes start to rotate, your production problems are solved. Whether you use them for derusting, cleaning, deburring or processing welded seams and removing hard scale and paint, they won't let you down.
When there is a need to precisely process slim workpieces or profiled surfaces, single-section brushes come into their own. They are slim, aggressive and tough. The feasibility of joining several of these brushes together makes them particularly versatile.
Pipeline brushes give outstanding service in the construction of oil, gas and water pipelines. They are used for cleaning up welded seams and were specially developed to deal with root-pass and fillet welds.
|
|
Name: Brush bar high level
Description:
Clearing brush and small diameter used for hard-to-reach the surface and the inner surface and grooves.
|
|
TYROLIT tool brushes for angle-, straight shaft- and bench grinding machines follow optimal the shape of the workpiece. Thanks to their high flexibility, they are extremely well suitable for cleaning, deburring or bevelling.
With these tools you can brush up surface finish or remove coatings, paint, lacquer, rust, scale or concrete ribs. Be in action without high working pressure (only the end of wires should do the work).
The wide TYROLIT tool brush range provides you for any application the right shape, kind of wire (crimped, knotted, straight ...) and wire quality (steel, stainless steel, hardened, brass ...).
|
|
METALWORKING INDUSTRY
- Surface cleaning, finishing and polishing aluminum or heavy plates and strips
- Deburring edges of tubes and machined parts on automatic deburring machines
- Removing rust, deburring, and for oiling in continuous sheet metal processing
- Removing and scaling wires during drawing process
|
|
Short description:
Our technical staff can design a brush that is matched to both your equipment mounting configuration(s) and your specific deburring applications. If you have a profile that s giving you headaches, we can design a built-to-profile brush using your wheel and a cross-section CAD drawing. A fitted brush requires less dressing-in and makes better contact for more efficient burr removal.
|
|
Abrasive Brushes for Fineblanking
Model TBK brushes are frontal brushes prepared especially for planetary type deburring systems.
We have different models (TBK1-TBK2-TBK3-TBK4-TBK5, etc...), depending on the type of anchoring of the brush.
In turn, all models are produced with different diameters and distributions.
For greater precision all our supports are injection-moulded at the Kumex-Plastic-Systems® division of the Kumex® industrial group.
|
|
Mink special-purpose strip brushes (SBL) - You’re limited only by your imagination.
There are always some applications that require brushes made specially for the purpose. With Mink’s innovative brush solutions, you’re equipped to solve these problems too. That’s because we offer a particularly wide range of special products.
Among these special products are the world’s largest one-piece panel brushes. When used as a protective surface on assembly tables, they ensure that scratches can’t occur. When serving as support and slide elements in sheet metal processing machines, they cut reject rates and reduce noise.
In addition, you can obtain standard profiles with non-standard bristle configurations.
|
|
Multistrip stands for innovative brush-based solutions in various industrial applications.
Here you find an optimum solution for your individual application. Choose one of the numerous possibilities from our extensive MultiStrip, PRO, Antistatic or MasterStrip standard range or tell us your application.
|
|
Type ME
HT-Coated-Abrasive-Strip-Spiral-Brush
Coated abrasive strip in a metal profile spirally wound; can be used as a loose spiral, or mounted on tube, or with a keying possibility and synthetic or wooden center.
|
|
Unparalleled CNC Deburring Brush
You can automate the deburring process on the same machining center after cutting process.
1) Benefits of our products
* No more inspection and re-derburring process.
* You can steamline the production line.
* You can improve the quality and stablize the high quality.
* Huge cost reduction and time saving process.
2) Features of our products
* Made of unique continuous fiber material exclusively for grinding
* No Bend or Distort in use unlike Nylon brushes and wire brushes
* Thanks to the above features of our unique material, there is no performance deterioration which also means finishing quality is stabilized.
* No secondary burrs occur unlike cutting tool type deburring tool
* Improve surface roughness upto Ra0.1um
|
|
|
|
Abrasive brushes: Deburring brushes, Stripping brushes...
