|
|
M.J. Maillis as a system provider, sets value on excellent operational reliability and easy maintenance for its machines.
The well thought-out concept for the Sander vario master 9460 underlines this goal. The high-performance automatic vertical strapping machine to strap loads with or without pallets can be integrated in driven or non-driven packing lines. Strapping unit moves down by toothed belt drive to top edge of the pack. Strap feed in each strapping unit position possible ensuring high troughput for min. and max. possible pack heights.
|
|
|
It allows to strip palletised loads by means of straps made in polypropylene or polyester. Possibility to insert a pressing device for compacting palletised loads. It is available for the automatic and semiautomatic operation.
|
|
|
|
|
|
The TwinPack is a combination of approved Cyklop machines. The GL 215 stretch wrapper and the XP 112 MVB strapping machine have been combined in the TwinPack.
The combination of the two techniques makes the TwinPack indispensable in daily despatching departments. The TwinPack allows a preselection of many different packing combinations.
Advantages at a glance:
- Two in one
Two types of transport protection combined in one machine.
- Flexibility with TwinPack
Demands on packing are continuosly increasing. The TwinPack makes it possible for Cyklop to fulfil these demands.
- Strapping or Stretching
The customer determines the type of load protection by using the appropriate programme pre-selection (product related).
- Strapping made easy
The irritaring manual and sealing disappear. The pallet is placed on the turntable, the strapping cycle is started per push button. The machine automatically straps the load according to the pre-selection.
- Timesaving
Valuable time is saved due to automation in this area. The operator only moves the pallet once. The number of secured pallets per hour rises considerably.
- Cost Optimisation
Lowering costs by using the optimal transport load protection or packaging.
|
|
Automatic Strapping Machine - KZS-111 / KCS-111
Description:
Automatic Pallet Strapping Machine KZS-111/ KCS-111 with turntable and
integrated laterally moveable roller conveyor
Description; KZS-111 Basic Model:
- Top-mounted friction-weld sealing head
- 1 KSR-friction-weld sealing head and 1 vertical arch
- Moveable sealing head
- PLC control
- Operation via OP
- Moveable strap lance for strapping palletised goods
- Change-over switch from PET to PP strap integrated in OP
- Min. conveying height 500 mm
- Can be integrated into most production lines '
- Up-stream and down-stream die-back systems
- Structural coating RAL 5010, gentian blue » Centring device with integrated roller conveyor,
- laterally moveable
|
|
- Designed and manufactured using highest quality
components.
- Aluminium head set and tension roller treated ensures long life of the machine.
- Tension electronically adjustable through a magnetic clutch to get the strongest tension without any physical effort.
- Electronic control of the tension, heating, cutting and length of the strap.
- Adjustment of the cooling after sealing to get better sealing quality, especially for hard packages (wood, iron, etc).
OPTIONS:
- Available in a range of different dimensions of arch.
- Double magazine for big arches.
- Mouvement of the all machine to look for the palet.
- Machine prepared to be put in an automatic line.
|
|
AUTOMATIC STRAPPING MACHINE WITH PRESS CMR 045
STRAPPING MACHINES FOR PAPER AND CORRUGATED BOARD INDUSTRY.
This model of machine is designed to vertically strap pallets of products which need to be compressed allowing the product to decrease in size and to increase its stability.
|
|
DIMENSIONS
Lenght 300 mm- 11"
Width 150 mm - 6"
Height 175 mm - 6.9"
Weight 5.2 Kgs 11.4 lbs
FEEDING
Pressure range 4.5 -7 bar / 64-99 psi
Air consumption 14 L/s - 29 cuft/min
PERFORMANCE
Max. tension force 5000 N - 6.5 bar - 92 psi
Tensioning speed 6 mt/m
Sealing Vibration sealing
Joint strength 80% of breaking strength
|
|
DIMENSIONS
Lenght 300 mm- 11"
Width 150 mm - 6"
Height 175 mm - 6.9"
Weight 5.1 Kgs 11.2 lbs
FEEDING
Pressure range 4.5 -7 bar / 64-99 psi
Air consumption 14 L/s - 29 cuft/min
PERFORMANCE
Max. tension force 5000 N - 6.5 bar - 92 psi
Tensioning speed 6 mt/m
Sealing Vibration sealing
Joint strength 80% of breaking strength
|
|
DIMENSIONS
Lenght 280 mm- 11"
Width 150 mm - 6"
Height 175 mm - 6.9"
Weight 4.9 Kgs - 10.8 lbs
FEEDING
Pressure range 4.5 -7 bar / 64-99 psi
Air consumption 14 L/s - 29 cuft/min
PERFORMANCE
Max. tension force 2500 N - 6.5 bar - 92 psi (variable with friction)
Tensioning speed 11 mt/m
Sealing Vibration sealing
Joint strength 80% of breaking strength
|
|
Powerful Pneumatic Combination Plastic Strapping Tool. Powerful tension, Maxi.350Kgs (3500N) for heavy duty plastic strapping jobs.
Automatic friction-weld and cut, no metal seals required.
Air pressure manometer to monitor sufficient air supply.
Adjustable tension force & sealing time for various strap specifications.
Much smaller air hose at 1/4” I.D. for flexible operation without hose tangling.
|
|
Combination Tools
The AMPT-58 is the ideal hand tool for High-Strength Tenax strapping.
Pneumatic Tension-Weld®
The model VT-10 and VT-13 combination tools apply Contrax, Dymax and Tenax strapping. Strap ends are joined with Signode's patented Tension-weld® process, eliminating the need for metal seals.
The lightweight VT-16/19, VT-16HD, VT-19HD and VT-25HD tools apply High-Strength Tenax strapping at higher tension levels. Ideal for use in both horizontal and vertical applications.
|
|
Very light and compact strapping tool, easy to use and set. Strong and reliable to use in industrial medium / light applications, is available in different configurations. The standard version is equiped by push button, on domand is also available the choke collar version. Available in four strap sizes: 10mm (3/8"); 13mm(1/2"); 16mm(5/8"); 19mm(3/4")
- MODERN DESIGN
- LIGHT AND ERGONOMIC
- DIFFERENT CONFIGURATIONS
- EASY TO USE
- NEW PNEUMATIC BOSCH MOTORS
|
|
Combination Tools
Pneumatic seal-feed
Using applied air pressure as a power source, pneumatic seal-feed combination tools quickly and effortlessly tension, seal, and cut the strapping. These tools include the AHP and the AMP.
Pneumatic sealless
Pneumatic sealless combination tools include the SLP and the SPC.
Pneumatic push-type
Pneumatic push-type combination tools, including the PNSC and PRH-Series models, are used with push-type seals on irregular-shaped packages. Air power tensions, seals and cuts the strapping.
|
|
A3H
With its short base plate the A3H is able to strap smaller packages. Thanks to its small dimensions and low weight it is suitable for a wide range of applications. Also supplied with a restrictor valve to permit the stepless regulation of the air supply, and in different tensioning levels (2500 N and 4500 N).
Strap qualities:
Regular duty (Uniflex)
up to 850 N/mm²
Strap dimensions:
9.5 - 20.0 x 0.38 - 0.60 mm
3/8 - ¾ x .015 - .024"
Tension versions:
2500 N, 4500 N
Sealing type:
Sealless
Weight:
8.5 kg / 18.7 lbs
|
|
DIMENSIONS
Lenght 430mm - 16.9"
Width 260mm - 10.2"
Height 310mm - 12.2"
Weight 10.3 kgs - 22.6lbs
FEEDING
Pressure Range 5.5 -7 bar / 78 -99 psi
Air Consumption 12 L/s - 25 cuft/min
PERFORMANCE
Max Tension Force 9000N -6.5bar-92psi
Tensioning Speed 6mt/m
Sealing seal double notches
Joint strength 80% of the breaking strength
|
|
DIMENSIONS
Lenght 350mm - 13.8"
Width 140 mm - 5.5"
Height 170 mm - 6.7"
Weight 4 Kgs - 8.8 lbs
FEEDING
Pressure Range 5.5 -7 bar / 78 -99 psi
Air Consumption 12 L/s - 25 cuft/min
PERFORMANCE
Max Tension Force 3000N - 4500N -6.5bar-92psi
Tensioning Speed 5mt/m 4500N - 7mt/m 3000N
Sealing seal single notch
Joint strength 80% of the breaking strength
|
|
DIMENSIONS
Lenght 350 mm - 13.8"
Width 140 mm - 5.5"
Height 260 mm - 10.2"
Weight 4.4 Kgs - 9.7 lbs
PERFORMANCE
Max Tension Force 5500 N
Sealing sealless
Joint strength 80% of the breaking strength
Gear ratio 1:18
|
|
Stand alone, mobile machine
• For small to medium volume of packages
• User friendly, fast strapping speed
• Use of PP strap, widths from 5-12 mm
• Machine, strap and after-sales service as a total package
|
|
Stand alone, mobile machine
- For small to medium volume of packages
- User friendly, fast strapping speed
- Use of PP strap, widths from 5-12 mm
- Machine, strap and after-sales service as a total package
|
|
As universal as a hand tool, irrespective of package size
If the daily package volume is only limited, the M-PAC 3 can be considered
- For straps 5 – 15.5 mm wide, adjustable
- 10 to 20 strappings/min
- Mobile, with lockable castors
- Irrespective of package size
- Working height adjustable
- Energy-saving stand-by mode
|
|
|
Semiautomatic strapping machine for polypropylene size 6 - 9 - 12 mm, max. tickness mm. 0,6. The strapping operation is very simple : place a package on the table, in contact with the sealing head, bring the strap over the package and insert the lead-end into the strap sensor. The strap will be tensioned, welded and then cut-off automatically. The force of the tape tightening and the length of the extended tape is electrically stepless controlled from the control panel. Electromagnetic tension detector. It is simply re-adjustable for the required tape width. Automatic motor power switch off function. Adjustable table height. The machine is equipped with the rotary wheels with the brake.
|
|
The Saturn ST- 2200 is the most advanced tabletop strapping system available. The electronic strap tension control delivers precise strap pressure from as little as 5 pounds up to as much as 120 pounds. Dial in the strap length and tension and you're ready to go. Loop the strap around the package and insert it into the machine. The strap
is automatically tensioned, cut and heat sealed. Another length of strap automatically feeds out for the next product to be strapped.
- Easy-to-use controls include illuminated on/off switch, reset, strap reverse, strap feed, strap length, and precision electronic dial for strap tension adjustment.
- Engineered for flexibility, allowing you to use any polypropylene strap from 1/4" to 5/8" wide. Adjustable table height from 29" to 31". Locking casters for portability to move anywhere.
- Superior design with fewer moving parts provides years of low maintenance costs.
|
|
PM205
The semi-automatic strapping machine for many applications and for every budget. Modern and reliable.
trap qualities:
Polypropylene (PP)
Strap dimensions:
5.0 – 15.0 x 0.55 – 0.70 mm
Strap tension:
50 – 450 N (adjustable)
Sealing method:
heat welding (heat-up 40 sec.)
Power supply:
230V/50Hz, 1 phase
|
|
|
|
|
|
NS-3ADFD
Features:
- Leg And Body K/D Assembly :
K/D assembly units make for compact shipment and delivery.
- Electronic Tension Adjustment :
Users can get the required tensioning force by dialing electronic tension-knob on the control panel.
- Safety Design :
Lower power consumption by 2 steps tension and 0.2V heater blade design allows lower watt/ampere consumption.
- Easy Strap Changing :
Innovative separated roller design can easily changed different strap thicknesses and no need for extra adjustments.
- Two Steps Tensioning :
It keeps proper bending power on the strap to avoid defected strapping. The first step tension reverses the strap around the package and second step to apply positive mechanical tension that can be adjusted by dialing on the panel.
- Durable & Easy Maintenance :
Durable and convenient for uses and provided with compact storage, this model highlights a precision performance and trouble-free maintenance with patent.
- Design for Silent Operation :
Motor can be stopped after every strapping cycle, advanced strap feeds kept down the noise unlike the startup noise of old systems.
- Advanced Devices :
For safe and convenient such as smoke vent, pneumatic tabletop, one-touch tension roller cleaning, tabletop folded edges and CE approved safety switches.
|
|
Features:
- Side-Sealing Head :
Can minimize dusts, water or any contamination falling into the machine and cause malfunctions.
- Safety Design :
DC24V internal powering eliminates shock and can prolong machine life. (Excluding motor).
- Adjustable Working Table :
20 steps of working height from 450 to 850mm enlarge variety of package sizes without tools.
- Easy Maintenance :
Independent PCB setups can isolate malfunction and reduce time for repairs.
|
|
High performance semiautomatic strapping machine. Electronic adjustment of tension, heating and length of the strap.
Designed and manufactured using highest quality components.
- Aluminium head set and tension roller treated ensure long life of the machine.
- Tension electronically adjustable through a magnetic clutch to get the strongest tension without any physical effort.
- Electronic control of the tension, heating, cutting and length of the strap
- Electric adjustment of the cooling after sealing to get better sealing quality, especially for hard packages (wood, iron, etc).
- Light and easy to move because of its lockable castors.
|
|
Strapping installations for product securing during transportation
- New installations or for integration into existing packaging lines
- Flexible solutions with PP, PET or steel strap
- From the same partner: development to commissioning
- Additional products: see „More information...“
- Machine, strap and after-sales service as a total package
|
|
Compact pneumatic sealless strapping tool for steel strap reliable to be used in medium / light industry applications. Available standard for three sizes of strap 13mm(1/2”), 16mm(5/8”), 19mm (3/4”) and different tension motors.
EASY TO USE
MODERN DESIGN
COMPACT
POSSIBILITY TO TENSION THE STRAP BY HAND TO SET THE PACKAGE
NEW BOSCH MOTORS
|
|
|
|
|
|
Manual Hand Tools
Manual hand tools are the most basic form of strap application equipment. They are perfect for operations that either do not have access to power sources or do not require the speed of powered hand tools. Signode manual tensioners provide strap operators with a simple method for tightening strapping around a load. A manual sealer is then used to positively join the tensioned strap ends together, ensuring that loads remain secure during transit, handling and storage. To make strap application more convenient and efficient, we also manufacture seal and sealless combination tools which combine the tasks of tensioning, sealing and cutting in a single tool.
Pneumatic and Battery-Operated Hand Tools
Pneumatic and battery-operated hand tools take most of the effort out of tensioning and sealing by performing those operations at the push of a button or lever. Powered hand tools are typically used to reduce operator fatigue, improve strapping efficiency and provide uniform tensioning. Signode pneumatic combination tools utilise air or battery power to tension, seal and cut off plastic strapping. These tools are available in seal-feed and sealless Tension-Weld® models.
|
|
|
|
Strapping machines and tools
