|
|
PEMSERTER® Series 4® Press
Click for more info. A 6-ton (53.4kN), manual, pneumatic press with built in point-of-operation safety device and 18"(45.7cm)-throat depth.
PEMSERTER® Series LT/4™ Press
Click for more info. A 3-ton (26.7kN), manual pneumatic press with internal point-of-operation safety device and 10"(25.4cm)-throat depth.
|
|
SWAGING FORCE: 100 Ton
CAPACITY ON 2 SPIRAL HOSE: 1"
FITTINGS 90°: 3/8"
MAXIMUM CRIMPING Ø: 46 mm
DIES OPENING: Ø + 20 mm
DIMENSIONS L x D x H: 300 x 390 x 280 mm
WEIGHT WITH OIL: 32 KG
SPECIAL DIES: OPTIONAL
EFFORT ON LEVER: 30 KG
|
|
Model P20HP
Crimping range (mm) 1 10 — 61
Crimping range (inches) 1 0.39 — 2.40
Crimping force (kN) 1370
Crimping force (tonnage) 137
Crimpings / hour 2 —
Max. hose size (inches) 1½
Die set 3 P20
Maximum opening (mm) 4 25
Master die (D / L mm) 84 / 80
Master die (D / L inches) 3.31 / 3.15
Control manual
Motor (kW) hand pump
Motor (HP) hand pump
QC tool 14 O
Foot pedal 15 —
Control unit: integrated X
Control unit: C1 —
Control unit: C2 —
Back stop device: mechanic O
Back stop device: electric 15 —
Mirror —
Pressure control P1 16 —
Pressure control P2 16 —
AGS auto greasing 16 —
Remotic control unit —
Counter L1, L2, L3 —
ASCII signal 17 —
VS PLUS control 17 —
Length (mm) 487
Width (mm) 441
Height (mm) 389
Length (inches) 19.2
Width (inches) 17.4
Height (inches) 15.4
Weight (kg) 66
Weight (lbs) 146
|
|
RIVCLINCH® Modular Systems
Under the "modular systems" product series, there is a standard range of Clinch tools available to you, from which you can compile individual Clinch tools within various module systems based on user requirements.
The module systems are divided into three main groups, which differ in terms of their respective max. joining force.
- RIVCLINCH® P35 S with 35 kN max. joining force
- RIVCLINCH® P50 S with 55 kN max. joining force
- RIVCLINCH® P75 S with 75 - 105 kN max. joining force
Special designs are also possible based on this modular system.
A modular RIVCLINCH® system consists of the following basic components:
- C frames
- Setting cylinders
- Tool set
- Pressure intensifier (booster)
Optionally, the system can be expanded by:
- Axle balancing slide
- Gyroscopic suspension
- Balancer
- Clinch cycle monitoring
The RIVCLINCH® systems from the modular series can also be integrated into automatically controlled production systems.
|
|
Simple and Easy Odd-Form Pick & Place Unit
In-Line and Off-line Capable
For 'Standard' Odd Form Components and Special Applications
Maximum Efficiency and Productivity
Minimized Footprint
Cartesian or 4 Axis Scara Robot for Fast and Efficient Placement
Intuitive Operator Interface, Easy Programming
6 Feeder Slots
|
|
Features
- Maximum flexibility, scalability and productivity at competitive costs
- Flexibility in handling THT, SMT and mixed-technology components by means of the patented Adaptive
- Complient Technology of the CHAD PIE head
- Minimum floor space required (app. 1,2x1,6m)
- Rigid steel base
- Compact ADEPT cartesian-based manipulator
- Component types: AXIAL, Radial, Pin header, DIP; SIP, Plugs, Relais, TO-220, Displays, LEDs, SMT, Daughter PCBs, PGAs etc.
- The patented Single-pin Clinch System allows clinching of any numbers of leads in any direction
|
|
The automation of odd-form component placement is economically justified when a variety of components need to be placed at high production rates. The flexibility of our equipment provides the automation capability of odd-form components even for variable batch sizes and a number of different component shapes to be placed.
|
|
|
|
|
|
ERmet : Modular Pressfit Tools: For Male Connectors
ERmet connectors can be end to end mounted in modular layout. To be able to pressfit the selected connector layout for your application in a rationalized way, we have designed the necessary pressfit tools to be modular too. This is true of the tools both for male connectors and for female connectors. The tool bases, also termed anvils, are fixed in a tool holder. Each connector module requires an appropriately sized tool module.
The standard tool holders are designed for two 50 mm modules (modules A, B, L and M), pressfitting a total module length of 100 mm. Due to the modular tool configuration, pressfitting can be carried out in any order. Using filler elements, it is also possible to pressfit just individual modules.
ERmet : Modular Pressfit Tools: For Female Connectors
ERmet connectors can be end to end mounted in modular layout. To be able to pressfit the selected connector layout for your application in a rationalized way, we have designed the necessary pressfit tools to be modular too. This is true of the tools both for male connectors and for female connectors. The tool bases, also termed anvils, are fixed in a tool holder. Each connector module requires an appropriately sized tool module.
The standard tool holders are designed for two 50 mm modules (modules A, B, L and M), pressfitting a total module length of 100 mm. Due to the modular tool configuration, pressfitting can be carried out in any order. Using filler elements, it is also possible to pressfit just individual modules.
|
|
Rollerforming, like orbital forming, is a non-impact fastening operation that has set the standard for precise assembly in a wide variety of applications.
Rapidly gaining converts from traditional methods of fastening, Rollerform is highly accurate and leaves parts with a beautiful finished surface. Rollerform can fasten large and small diameter parts and many types of materials.
Rollerforming can:
- Crimp and seal using multiple rollers
- Cold form with precise control
- Satisfy cosmetic requirements on assembled parts
- Form both inside and outside diameters simultaneously
- Be used in work cells and automated assembly.
|
|
SYNCHRONOUS MECHANICAL MOVEMENT:
- Designed for heavy-duty cycles
- Devised for elementary control
- Sized for 24/7 operation with no routine maintenance
|
|
VELOMAT 500 SYNCHRO is the new rotary base assembly system manufactured by VELOMAT. Consisting of mechanical controlled manipulators and an indexing rotary table. The base system is characterised by a single motor, operating both indexing table and manipulators in an absolutely synchronised motion. The pick and place motion of the manipulators is obtained by the synchronised motion of two reciprocating plates that are controlled by a Colombo Filippetti cam mechanism. Thanks to mechanical synchronised motion and to the small masses moved, the base system VELOMAT 500 SYNCHRO is able to offer many features such as: precision, high speed, low vibration, quiet motion, and absolute repeatability of movement. VELOMAT 500 SYNCHRO is the solution to assembling that requires precision, reliability, low costs and high production rates.
|
|
VELOMAT SRL is the leading base machine manufacturer for high production automated assembly applications.
VELOMAT machines are created by incorporating the line of patented quality components manufactured by COLOMBO FILIPPETTI with VELOMAT experience in the assembly automation field.
VELOMAT 1000 Synchro is a rotary base machine completely mechanically operated and manufactured by VELOMAT. The pick and place motions of the individual manipulators is obtained from the rotary indexing table, operated by a Colombo Filippetti cam mechanism following optimised kinematic laws of acceleration and deceleration. The final movements being extremely smooth, precise, and without vibration. The main characteristics that distinguish VELOMAT 1000 SYNCHRO are: high rigidity of the manipulators, high flexibility and vast ranges of cycles, high weight carrying capacity, adjustable strokes in horizontal and vertical direction, and high production rates.
|
|
Type series SA03-10-30 - Marathonline
with automatic feeding for fully-automatic assembly
- Quick change of individual modules
- Quick change of screwdriving head and bits
- Extremely high availability in rugged series use
- compact design
|
|
Type series SA03-10-30 - Marathonline
with automatic feeding for fully-automatic assembly
- Quick change of individual modules
- Quick change of screwdriving head and bits
- Extremely high availability in rugged series use
- compact design
|
|
|
|
|
|
The Tyco Electronics P200 is a stand-alone insertion machine targeted at low to medium volume production. Equipped with a rotary insertion finger, the P200 can apply products at up to 7 different angles without having to rotate or remove the board. The end result is the ability to apply products at various angles without increasing cycle time.
Easy Operation
Insertion tools for Tyco Electronics products are composed of an insertion head (upper tooling), an anvil (lower tooling) and a product feeding mechanism. These tools are product specific and the PCB holder interface is designed according to the customer application. A rotary insertion finger allows the insertion of pins at different angles. Because of a simple mechanical and electrical interface, other tools can easily be integrated into the machine.
The standard insertion head on the P200 machine is pneumatically activated. All movements such as feeding the product, cutting contacts off the carrier strip, gripping and inserting the product into the PCB are activated by the vertical movement of the pneumatic cylinder.
Also available is the motor driven base insertion head together with a large variety of product specific conversion kits. These conversion kits can also be used on P300 and P350.
The excellent performance of a multi-tasking control system allows easy programming and operation of the machine. Simple operator and programming interface, failure diagnosis and modem (for remote diagnosis) to provide easy operation and trouble-shooting.
|
|
- For screws and headless pin
- Double slide system for head stroke and bit stroke
- Shut-off by depth or torque
- Screwing upside down also possible
- Simple and robust design
|
|
| ... products without technical information |
| |
|
|
Assembling machines, Screwing machines
