|
|
| Products 121 to 150 of 185 |
The mixer/heat-exchanger CSE-XR was developed and patented by Fluitec AG. It is the most important invention in the static mixing technology of the last 20 years.
The CSE-XR is mainly used for temperature conditioning of highly viscous liquids at laminar flow. A strongly defined and well controlled homogeneity is guaranteed in any situation as well, as a very narrow residence time distribution. The reason for this excellent performance is its geometry, which is consequently based on the geometry of the most efficient static mixer type, the CES-X.
The very high radial mixing efficiency constantly ensures an intensive flow against the internal heat transferring tubes, thus allowing a
the compact design of this device.
Multitube heat exchangers are often not dedicated for scale-ups. Problems occur mainly in cooling processes at laminar flow conditions, when the product can "freeze" in particular tubes, due to its increased viscosity at lower temperatures. Uncontrolled residence time distribution and maldistribution are thereby leading to a bad process control.
Monotube heat exchangers (tubes with a double shell) can be built much smaller, if using static mixers. The mixing elements are improving the surface renewal rate significantly.
|
|
Static mixers are well established and widespread in all fields of chemical process technology. It is characteristically for static mixers, that, in contrast to dynamic mixers, only the media to be mixed are in motion. The liquids or gases are mixed by pump energy only, while the geometrically strong defined Fluitec mixing elements in the tube remain in position.
Among others, static mixing elements can be applied in the following fields of application:
mixing of pumpable fluids
dispersing and emulsifying of insoluble liquids (cleavage)
mixing of reactive liquids
mixing and homogenisation of polymers (hot-melts)
contacting of gas and liquid phases
mixing of gases
tempering of viscous media
In contrast to empty tubes, static mixer possess a very high efficiency for self-cleaning.
Wear of static mixers is negligible due to the lack of any moving parts.
|
|
Static mixers are well established and widespread in all fields of chemical process technology. It is characteristically for static mixers, that, in contrast to dynamic mixers, only the media to be mixed are in motion. The liquids or gases are mixed by pump energy only, while the geometrically strong defined Fluitec mixing elements in the tube remain in position.
Among others, static mixing elements can be applied in the following fields of application:
mixing of pumpable fluids
dispersing and emulsifying of insoluble liquids (cleavage)
mixing of reactive liquids
mixing and homogenisation of polymers (hot-melts)
contacting of gas and liquid phases
mixing of gases
tempering of viscous media
In contrast to empty tubes, static mixer possess a very high efficiency for self-cleaning.
Wear of static mixers is negligible due to the lack of any moving parts.
|
|
Competence in Mixing Technique
WILO has been developing and manufacturing submersible pumps for water disposal and sewage treatment for several decades. Products which have proved successful in heavy-duty use in pumping stations and sewage plants.
Machine equipment for sewage works has been added to the company’s product range over the last 20 years. In 1986, this gave rise to the Environmental Technology Division and the submersible mixer product series. |
|
The Premier Submersible Basket Type Media Mill is an exceptionally versatile dispersion system specifically engineered to allow batch and tank size flexibility.
• Independently controlled mixers and milling shaft provide:
-Uniform particle size.
-Consistent temperature control.
-Better flow control.
-Minimal operator interface.
• Capable of particle size reduction in a range of slurry applications.
• Easy clean-up. |
|
EDUCTOR PRINCIPLES:
BEX eductors use a unique venturi design which enables smaller pumps to circulate large volumes of tank solution. The eductor will circulate four to five gallons of solution for each gallon pumped.
BEX eductors are used for mixing chemicals, suspending solids, adjusting pH, "sweeping" debris or sludge toward a filter intake and many other useful applications.
TYPICAL APPLICATIONS:
- Plating tanks
- Cleaning tanks
- Phosphating tanks
- E-coat tanks
- Fertilizer tanks
- Pulp tanks
- Sludge tanks
- Paint booths
- Anodizing tanks
- Cooling towers
- Decorative fountains, and more...! |
|
Application:
The GS1500 vacuum mixer is designed to create solid surface material by evacuating air from the matrix during the blending process. Vacuum mixed materials can be fabricated to create seamless and durable products popular in today's kitchen and bath industry.
Description:
The GS1500 vacuum mixer includes the following features, heavy duty steel construction, stainless steel mixing pot with an approximate capacity of 325 lb., aluminum mixing vessel lid with replaceable seal, a heavy duty contoured stainless steel mixing blade, and a vacuum pump that requires no oil. The GS1500 vacuum mixer is available in three phase, 50 or 60 hz. |
|
Fully automatic polyelectrolyte solution system for granular and concentrated liquid polyelectrolyte (for other products on request).
Designed as two-chamber pendulum system. Our systems achieve a reliably high quality in preparing polyelectrolytes while saving resources as much as possible.
|
|
Weighfiller
For automatic and precise dosing of dry, free-flowing products
Liebel Dosing systems LDS 1, LDS 2 and LDS 3 (single, twin, and triple linear weigh fillers) can be used for high precision dosing of powder, grain, granulate and chunky product. This can be herbs, teas, spices, coffee, sugar, wheat, pharmaceutical products, screws, bolts etc …. Our industrial standards guarantee excellent precision together with unsurpassed reliability over many years of life-span. Stainless steel finishings with polished surfaces and a high ground clearance permit excellent cleaning properties.
- Complete finish in stainless steel
- Adaptive controller with self-learning limiter and dosing speed
- 25 memory cells for different articles
- The dosing channels are adjustable to cope with very different product dimensions and attributes, optional also from memory
- Open design, easy to clean
- Also available as “multi-construction“ for high capacities or product mixtures
- Either manual handling or synchronization with packing machines |
|
| ... products without technical information |
| |
|
|
Mixers, Agitators
