|
|
| Autoclave Engineers’ MagneDrives® provide high speed, magnetically coupled mixing in high-pressure situations without contamination of the process. The MagneDrives® are available in wide variety of sizes from small laboratory sizes up to production plant mixer sizes. These high-speed mixers are used for gas dispersion, liquid blending and solids suspension. |
|
The Mini-Mix is a small laboratory mixer used for testing small batches of product. The test results can be used for scaling up to larger mixer sizes. The Mini-Mix is ideally suited for applications such as: toners; pigments; metals; cosmetics; pharmaceuticals and chemicals.
The Mini Mix is available in three sizes (5, 10 & 20 liters) and features exchangeable containers.
|
|
For closed-vessel applications.
Compatible with Nalgene carboys, culture vessels and other containers with sanitary flanges
Mix up to 400 L
Autoclavable in place
Non-cytotoxic materials meet FDA requirements Reversible rotation for up- or down-pumping experiments
LCD display and recording of scaleup parameters including speed, torque, impeller flow and time
Repeatable digital data entry via splash-proof keypad
Temperature probe included
|
|
Premier's workhorse for the lab, widely used for the processing of small batches in the lab or pilot plant. With mechanical speed drive and 1.5 or 2.0 HP explosion proof motor, this unit has the power to satisfy a wide range of applications where mixing problems exist. The 2500HV breaks up agglomerates and reduces particle size. Increase your mixing efficiency with Premier's line of interchangeable mixing heads.
• Hi-Vis Head
• Simplex Head
• Duplex Head
• Rotor/Stator Head
Heads are also interchangeable with Premier's Model 2005 Lab Dispersator Mixer. |
|
| Silverson's line of laboratory mixers are suitable for the widest variety of applications - mixing, emulsifying, homogenising, disintegrating, dissolving - and will process volumes from as little as 1 ml up to 12 litres with an efficiency and flexibility unmatched by other machines. |
|
| Admix offers a complete series of laboratory mixers, ranging from 2 liter benchtop units to 10 gallon pilot plant floor models. All models are completely manufactured or enclosed in stainless steel for superior corrosion resistance, sanitation, and cleanability. All models provide predictable, repeatable results when scaling up Rotostat® Emulsifiers or Rotosolver® Dispersers from the development lab to pilot scale and full production, or can be used for small batch production only. |
|
| Slow running submersible units with integral motors from 1.4 to 4.5 kW (1.9 to 6 hp) for gentle circulation and mixing of fluids in treatment plants and industrial applications. SB is complete with monocast propeller blades and excellent self cleaning properties giving optimum operation with low energy input especially when used for denitrification and phosphate elimination. The unit is connected to a concrete pedestal by an innovative coupling system which allows the unit to be raised and lowerd for inspection even in filled tanks.The concrete pedestal absorbes all dangerous vibrations, thus giving a long service life both for the machine and the installation. |
|
Mixing is a remarkable net product!
When defining a production process, you will eithter choose a continuous or batch mixing process.
Being among the leading manufacturers of mixers for both kind of process, Gericke offers a range of reliable and scientifically proofed mixers.
Very often, we are working together with our customers to find the most satisfying solution. We invite you to visit our test lab for test running with your product to be used in a mixing process. Based on our experience in the fields of feeding and pneumatic conveying but also transport, recipe preparation and further transport of the final mixture, we are the right partner for a competent advice and consultance. |
|
| The wide range of mixers uses the exclusive principle of central injection of dry or liquid products in the zone of mixture. This principle guaranteed a perfect control of the point of meeting of the products and thus a single quality of distribution |
|
| FLUX offers a complete range of mixers for agitating, mixing, stirring or homogenizing operations within containers of 30 to 30.000 Litres. The complete range of mixers is based on a modular design, allowing the user to select the individual component parts to meet his specific requirements. |
|
Agitator exclusively designed by ITC with 6 spouts, three of the radial with a centrifugal movement to produce a rotation of liquid, and three of them axial to stir the bottom
Direct transmission shaft in stainless steel |
|
Standard range: HELISEM®
The HELISEM® line, including three standard mixers, is designed for economical mixing solutions, available with short deliveries. It has a broad range of applications, including water treatment, fine chemicals and end-products industries.
Open and Sealed tank up to 250 m3.
Custom-made range: ROBIN®
The ROBIN® line of customized mixers is ideal for complex processes running in extreme conditions, best suited to the requirements of hydrometallurgy, the chemical and petrochemical industry, and fine chemicals. The list of possible applications includes alumina refining, fermentation, polymerization, phosphoric acid, resins and high viscosity products, to name but a few.
Pressure up to 250 bar
Temperature up to 350 °C
Volumes from 0.010 m3 to 10,000 m3. |
|
Fixed Angle Applications - For blending, homogenizing and temperature uniformity duties
Swivel Angle Applications - For tank cleaning operations and the preventions of harmful sludge build-up
Pipeline Power Mixers - For the petrochemical industry
Unique Advanced Propeller Design - Featuring high pumping, high thrust, minimum power draw, no cavitation, solid reliability
Unique Side Entry Mixer Tank Shut-Off Device - Permits the bearings and mechanical seal to be changed under full tank conditions
|
|
Made in lengths of up to three meters, complete with PVC support plate. They may be supplied, with axial-flow or centrifugal flow, with a rotation speed from 2800 to 600 rpm on the work they have to perform.
Due to their constructional detail they are suitable for use in purification and neutralisation plants and for the mixing of reactants, additives and flocculants in tanks with volumes of up to 20 m³. |
|
Metso Minerals Attrition Scrubbing machines are simple, yet highly efficient units for scrubbing particles at densities of 70 - 80% solids.
Two opposed Helix type propellers on each shaft force particles against each other, resulting in intense scrubbing, polishing and disintegration. Efficiencies generally increase with and increase of the density of the pulp, as particles have more frequent grain to grain contact. The twin propellers, mounted on a shaft inside a tank, are supported by a heavy-duty steel structure. Shafts are coupled to either gearbox or spindle bearing drives. An opening in each cell partition allows pulp to flow through the machine. Machines are usually supplied with two, four or six cells, with each cell ranging in volume from 4 to 9900 liter’s. (1cubic foot to 359 cubic foot). Odd cell arrangements are also available as custom supply |
|
For optimised particle size distribution: The Nebulasizer
The NARA Nebulasizer is designed to optimise the particle size distribution of soft granulates and extrudates. This standardization is possible both with wet and dry granulates.
During the process the oversized agglomerates will be reduced in their size and simultaneously fine-grained resp. dust particle are applied on bigger agglomerates. In one step the coarse particles are eliminated and the fine particles are agglomerated, but without an unwanted crushing. A following process step like sieving is not needed.
Because of his simple layout the machine is easy to clean, why the Nebulasizer is of interest for the pharmacy and the food processing industry in equal measure.
The GMP construction consists of a minimum of components with a highly polished surface that makes disassembling and cleaning in no time.
Besides the stainless-steel construction there is also an alternative for heavy industry available. This construction is able to convert building material like moulding compound or ceramics.
Nara’s especially developed innovative principle of comminution minimises the shearing strain of the particles, so that a crushing of particle size is not given.
Because of the screenless construction a breakage of the screen is out of the question.
The Nara Nebulasizer is now available as a milling tool in the new generation of Nara-Pharmamills. It can be integrated perfectly into existing productions.
|
|
A312
Recommended for axial-flow impeller for side-entry applications
Designed for demanding pulp and paper applications
Also used in other side-entry applications, such as oil storage
Features minimal radial flow
|
|
IBC Mixers
Mixing in Intermediary Bulk Containers (IBCs) can be a challenging task. With the restricted opening and problematic vessel geometry it is difficult to find a mixer which can operate efficiently in these containers. Conventional agitators can provide adequate in-tank movement at low viscosities, but they are generally less effective and can be difficult to clean.
The Silverson Ultramix is designed to provide solutions to challenges such as this. The small diameter dynamic mixing head provides vigorous in-tank mixing, even at higher viscosities, eliminating dead areas in square vessels. This also reduces power requirements and simplifies cleaning – the Ultramix is designed for CIP (Cleaning-in-Place) and complies with 3A, USDA and cGMP requirements.
To further enhance the capabilities of the Ultramix in this application Silverson has designed a mixing station for use with IBCs. The unit incorporates a number of safety features and is available as either a mobile model which can be moved between vessels, or a floor/wall mounted station for operation in a designated area. Various levels of automation are available from safety interlocked manual operation to fully automated systems.
|
|
LIGHTNIN 700/800 Mixers are designed to provide reliable service in the largest, most demanding applications, from pharmaceutical fermentation and large-scale chemical processing to minerals processing and heavy sludge waste treatment.
Exclusive hollow quill drive protects the gear train from severe shaft flexure.
Bearings are sized far beyond AGMA requirements for minimum maintenance and long service life
Heavy-duty motor mount is standard
Horsepowers from 25 to 1250 and speeds from 230 to 11.4 rpm
Choice of replaceable cartridge seals |
|
Ideal for simple blending, solids suspension, high-viscosity and gas-liquid
applications up to 400 L
Compact design is ideal for small vessel heads
Fixed- or remote-variable speed control
Economical, standard and high-torque models available
Choice of electric or explosion-proof air motor
High-efficiency A310 impeller is standard
Year 2000 compliant |
|
The DOPAG ELDO-MIX range of gear pump driven metering and mixing systems are built in modular form and are custom designed.
Depending on the specific application, various basic configurations are available. |
|
The MICRO-MIX range of systems are compact, pneumatic or electrically driven piston pump metering and mixing systems.
They are used to either continuously apply or meter shots of low to high viscosity multiple component materials such as epoxies, polyurethanes and silicones within a mixing ratio of 100:100 to 100:4.
The material can be abrasive as well as filled.
The material is either supplied from pressure vessels or by feed pumps.
|
|
The VARIO-MIX range of systems are solvent free, compact, pneumatic or hydraulically driven piston pump metering and mixing systems.
They are used to either continuously apply or meter shots of low to high viscosity multiple component materials such as epoxies, polyurethanes and silicones within a mixing ratio of 100:100 to 100:4. The material can be abrasive as well as filled.
The material is either supplied from pressure vessels or by feed pumps.
|
|
Features:
- Casting capacity 2- 6 kg/min
- Mixer and vacuum processor in one machine
- Continuous and automatic mixture and evacuation processing
- low pressure range (vacuum) up to 20 mbar (abs.)
- Frequency controlled drive technology for all metering systems
- Suitable for high viscosity compounds
- No limitation to filler hardness and high reactive compounds
- Free flow casting as well as mould injection
- Available as Minicast without degassing unit for normal guss |
|
Features:
- Casting capacity: 5-300 kg/min
- Other casting capacities on request
- Frequency controlled drive technology
- Operator panel with recipe administration
- Designed for powders and grains sizes up to 16mm
- Mixing and degassing system with wear protection
- Free flow casting as well as mould injection
- Filler metering with and without premixing
Option:
- Continuously working degassing system
- Special machines on customers request
- Tele diagnostic system |
|
|
|
Mixers, Agitators
