|
|
YVROUD completes its range of basic extrusion line integrated equipment with different conditioning machines (the list presented is not exhaustiv)
- 'CYCLONE' ™ Coiler range, with simple our double take-up
- Blown film reeler / Conditioning table.
- Schill roll units for laboratory applications.
- Pelletizing unit for film waste recycling.
|
|
Film and Sheet Calenders
Laboratory calenders are used in the development of continuous processes.
They are suitable for the production of film and sheet of different layer thicknesses made from a wide range of polymer materials such as PVC, polyolefins, PU and many others.
Calenders in L, F, I or Z configuration with roll diameters of 168 mm, 250 mm and 350 mm are available.
|
|
YVROUD is proposing any type of tanks needed for the cooling or the calibrating of pipes and profiles: calibrating units with or without vacuum, immersion or spraying cooling units, relaxation tanks, pelletizing units ...
YVROUD warranties you:
- an adapted solution to your need.
- An assembled and tested equipment before delivery on site.
OPTIONS:
· Fan or air dryer.
· Collector tank.
· Add-on cooling unit with recycling water.
· Additional pumps.
· Electrical shifting on rails.
|
|
YVROUD propose different types of haul-off units according to the material to pull: units with flat belts, units with caterpillar, units with pads.
YVROUD warranties you:
- an adapted solution to your need.
- An assembled and tested equipment before delivery on site.
OPTIONS:
· Adaptation : motor power, belts width
· Pneumatic closing , with or without pressure
adjustment.
· Caterpillars with special coating or special pads.
· Remote control with extrusion line
· PC supervisor drive.
· Special profiles guides ...
|
|
The CannonForma SPEEDFORM Series has been especially designed for processing reeled material. As a result, the Speedform Series is ideal for the production of industrial parts manufactured from thick gauge materials.
Speedform is extremely valuable for producing automotive trim parts and other similar products using "In Mould Decoration". This is the process in which thermoformed parts are reinforced by injection moulding onto the back of the forming.
|
|
Lines for polished / thermoforming sheets - versatile, economic, indispensable
Thanks to the wide scope of possible applications, thermoforming sheets made of high-quality raw materials such as polystyrene, polypropylene or polyester have become an integral part of everyday life. For many decades, thermoforming sheet lines have been a standard feature of Reifenhäuser's product program. In addition to the versatility and profitability of our technical developments, their main target and tasks are meeting the product demands of our customers.
Areas of application
Everybody comes across thermoforming sheet products regularly on the shelves of the supermarket. Whether in the form of yoghurt or icecream cups, margarine or milk containers, or as trays for TV or microwave meals or as blister packs, thermoforming sheets have become indispensable for transport and protection of foodstuffs and drinks. This is not the only place where we daily meet polished sheet products - they also abound in the office and especially in our cars. The automotive industry in particular uses thermoforming sheet with smooth or embossed surfaces for high-quality inner panelling.
|
|
IMD process allowed to thermoform a colour matched or pre-printed graphics using thick gauge material, which is then strengthened by injection moulding on the back surface.
Substantial costs saving can be made as the whole injection moulding process is simplified because there is no need for coluor change and the plastic parts do not require painting.
|
|
CONTROL PANEL :
Each button on the control panel is marked with a clear function.The sequence of movements is controlled by PLC to prevent any mistake of the operator.
MACHINE CONTROLS :
Pre-programmed SIEMENS S7 electronic controls.
ADVANTAGES :
- Digital control of the parallelism
- Digital monitoring of stroke
- Digital monitoring of pressure
- Self-learning system for recording of mold stroke
- Two languages diagnostic error search
- Management of all press functions
SAFETIES
Made in accordance with CE.
|
|
Preparation and dosing units
*EH&S protection enclosure
Ready to install system for dosing of up to three different chemicals.
Total safety for the environment, pumps, process and personnel
DOSAPACK® - POLYPACK® M
Compact and self-contained, DOSAPACK® metering packages are ideal for preparing, storing and injecting chemical solutions.
* Automatic preparation of polymers, emulsion
POLYPACK® AE are continuous and automatic units for polymer emulsion preparation. Extraction / dosing flow: up to 4400 l/h in standard version.
*Automatic preparation of polymers, powder
POLYPACK® AP are continuous and automatic units for polymers in powder preparation. Extraction / dosing flow: up to 13,340 l/h in standard.
|
|
Casbar, pioneer company in the Madrid region for Polyurethane Foam deposition Sealing.
Due to the reaction of its components (this foam is a mixture of polyol and isocyanate) once they get in touch with the atmosphere, Polyurethan Foam used by Casbar provides a perfect sealing over any surface.
The deposition process over the panels is electronically controlled, which guarantees a complete homogeneity. On the other side, elastomeric foam is highly flexible and its density can be adapted according to customers’ requirements. Thus, the layer will depend on each application needs of getting collapsed under the material load (for example: irregular absorption of materials to be link, vibrations absorption needs, appropriate sealing by means of foam compression, etc.)
This manufacturing line over cold enables sealing injection over any surface and material, painted, pre-treated or raw material. Due to the high compressibility of the resulting foam, it absorbs, as a cushion, all the loads.
|
|
Injection machineThanks to her experiment, our team proposes a complete range able to answer your needs as close as possible :
* New machines:
* Discontinuous lines:
- Range ECO for a limited budget
+ capacity from 0 to 160 kg/min
+ Various Options
- Range PRESTIGE for the more pointed applications
+ capacity from 0 to 160 kg/min
+ Management in loop closed of the flows
+ Precision of the weight injected of 0,5%
+ Various Options
* Continuous lines:
- Our machines will be able to answer your requirements thanks to their many functionalities, while remaining however easy to use
* Renovated machines:
* Our park machines of occasions will be able to also meet your specific needs.
* The modification of your machines can be planned to improve your process, or to adapt your working tool existing to your new needs.
|
|
|
Welcome in the whole of the active functions of the design and the studies to the responsibility for construction and the control of the equipment of installation of system of injection POLYURETHANE and these components: heads of mixture, repairs of pumps high pressure, machines of foam polyurethane injection, lines of continuous casting, spare parts of all marks, mould holders.
|
|
The traditional design of Cannon Forma Rotaryform machines is a cost-effective, tried and tested format especially appreciated for high production requierements, and significantly enhanced excellent service for many years, producing items such as refrigerators, pallets, sanitary ware components and automotive products.
Rotaryform is available in 3 and 4 station versions, as well as in pressure forming and twin sheet forming versions, with optional automatic sheet loader and product unloader.
|
|
» VACUUM-FORMING PRESSES
Double superior and inferior heating table with driven infrared radiant elements. Positive and negative bubbling system. Mould holder carriage and counter mould punch holder with pneumatic driving
» Vacuum-forming equipment optimized for the following materials :
. Thermoplastics
» Technology :
. Driving of all parameters and all actuators by microprocessor on industrial PC
. Display on a 15-inch graphic colour screen
. Electronic adjustment of the heat distribution on the superior and inferior table tops, control of the heat and cooling temperature by pyrometers
. Blank holder frame with pneumatic parallel tightening and complete opening
» Highly-versatile equipment
|
|
CannonForma Single Station provides total versatility across many applications and all types of material.
This type of machine is particularly flexible, as its levels of automation and can be tailored exactly to suit customers' individual requirements. Each machine is easy to customise, ensuring maximum value for money, and can be specified to meet any thermoforming task. Both pressure forming and twin sheet forming versions are available. Functional scheme of machines is adaptable to particular productions maintaining high standard of production stability, repeatability of heating system, ergonomic, efficiency and solidity in construction.
|
|
The cost effective stainless steel line
Compact and modular, incorporating a variety of input and output module lengths, a choice of intermediate units and a number of transfer-plate lengths.
Flexible and/or semi-rigid film suitability
Fast and simple tool change
Reverse handing option
Air pack, vacuum and MAP options
Touch screen
Enhanced safety
|
|
Thermoforming consists in processing plastic into finished parts from a sheet or a film, by using heat to shape the sheet into the desired form. Accurate temperature control is essential to ensure high quality forming and constant production conditions.
Matrasur Composites offers a large range of thermoforming machines totally equipped and controlled by electric motors for a greater production rate compared to machines working with pneumatic or hydraulic power. Among others, these machines are also equipped with a system for changing moulds and tooling replacement that reduces idle time for a better productivity ratio.
|
|
CannonForma has been one of the pioneer companies in this technology, manufacturing very sophisticated machines for complex parts production. This process allowed the production of hollow parts welding together two sheets formed in two moulds separately.
After the manufacture has been trimmed, there is not any loss in the welding zone characteristics.
CannonForma has revolutionised the approach to twinsheet technology developing very innovative plants dedicated to the production of fuel tanks.
|
|
| ... products without technical information |
| |
|
|
Molding machines, Thermoforming machines, Roto-molding machines...
