|
|
AIR SEPARATION PLANTS FOR THE SIMULTANEOUS PRODUCTION OF LIQUID AND GASEOUS OXYGEN AND ARGON
Simultaneous production of liquid and gaseous Oxygen and Argon through cryogenic process using tray or packing technologies.
CAPACITY
Oxygen: from 200 Nm3/h to 30,000 Nm3/h
Argon: 92 % recovery
PURITY
Oxygen: > 99.5 % (O2)
Argon: < 1 ppm (O2) |
|
Air separation plants
From our general experience, we know that the basic components constituting the ambient atmosphere are oxygen (21%), and nitrogen (78%).
GRASYS Air Separation Units are provided to disengage each one of these components with the scheduled purity at the output. When it comes to the air separation process it is worth talking of the two major ends of this method, namely:
- the production of gaseous nitrogen
- the production of gaseous oxygen.
By gas product
Nitrogen plants and Stations
Oxygen plants and Stations
Cryogenic plants for nitrogen, oxygen and argon production
Nitrogen fire-fighting plants
Hydrogen plants
Hydrocarbon plants
Air and gas compressors
By technology
Membrane Plants and Stations
Adsorption Plants and Stations
Cryogenic Plants and Stations |
|
Over the last 30 years, Toromont has emerged as the
undisputed international leader in the design,
engineering and fabrication of modular PROFESSIONAL CO2 plants.
We offer commercially viable solutions for a variety
of CO2 applications, from low pressure gathering to
water dehydration to high pressure (200 to 400 bar)
disposal, based on our modular approach to process
problems and our detailed understanding of the construction
of CO2 plants. |
|
Nitrosource
autonomous 100%, with a reduced maintenance, the Nitrogen generators Parker replace the bottles of gas and the liquid supply of nitrogen.
Applications: inertage, network of nitrogen, packaging of food products...
Based on membrane technology, Nitrosource is the nitrogen professional generator of evolutionary design, enabling you to extend the capacity of the generator on site without repurchasing a complete generator. It thus follows the evolution of the growth of your factory. It produces nitrogen in full safety 24:00 /24H, until 4000 Nm3/h.
Nitrosource® enables you to easily produce nitrogen on site starting from compressed air.
Nitrosource® is composed of a central processing unit which can be wide in term of capacity by the addition of 5 pennies units. Thanks to the design Master/slave, up to 11 central processing units and theirs under units can be connected between them and managed like a single generator.
Nitrosource integrates a station of filtration of compressed air of high-quality. This characteristic optimizes laquality of compressed air in entry of the generator, ensuring a great longevity of the hollow fiber membranes. The generator is equipped with a digital system of data management to record and communicate the parameters of operation such as the pressure, the flow and the residual concentration out of oxygen.
The equipment is deprived of parts moving, ensuring an operation without concern, durable and
almost without maintenance. The generator is ready to function as soon as the compressed air is connected.
Nitrosource offers an unlimited quantity of nitrogen to you and can be easily connected to an external reservoir of storage. This will enable you to absorb the peaks of consumption in your applications where the demand for nitrogen is variable.
Ideal solution to replace the nitrogen bottles or the liquid nitrogen supply.
|
|
Distributed Energy Systems' StableFlow™ Hydrogen Professional control System is a breakthrough product allowing a power plant to actively control professional generator casing hydrogen purity, pressure and dew point.
StableFlow Hydrogen Control Systems integrate into your current hydrogen supply and automatically control pressure, purity and dew point. Actively controlling
hydrogen at optimum professional levels in your hydrogen cooled generator that will:
• Optimize Fuel Efficiency
• Maximize Generator Capacity
• Extend Generator Life
StableFlow Hydrogen Control Systems are designed for simple installation and do not require a generator outage. |
|
Claind is one of the world’s biggest manufacturers of water electrolysis systems for hydrogen production.
Claind’s first product in this field was the HG2000 Series of reformers, designed initially for laboratory use, but later extended to applications in the field of renewable energy and other areas requiring low flow rates of high purity hydrogen. These machines incorporate a unique technology based on an extremely robust electrolytic cell with platinum-palladium electrodes, capable of generating ultra-pure hydrogen without auxiliary industrial purification systems, thus guaranteeing far greater simplicity of design.
More recently Claind has also developed the HG MAX3 Series of industrial hydrogen industrial generators. Here too Claind has used its own proprietary technology to develop an extremely reliable, top quality generator with an exceptional characteristic in the form of 15 bar delivery pressure. |
|
There are three hydrogen generator models in the HG2000 Series, offering outputs of 200 to 600 Nml/min and gas purity ratings in excess of 99.9995%. Thanks to their compact dimensions, these units can easily be positioned near the analysers they feed.
These industrial generators are equipped with a microprocessor control system, a liquid industrial crystal display to inform the operator of generator status in real time, and a membrane keyboard for setting main gas delivery parameters. HG2000 Series reformers are also equipped with an effective alarm system to warn the operator of any system malfunctions.
|
|
Proton Exchange Membrane Compact
Manufacturer of hydrogen generators
- High purity (99.999+ %)
- Process pressure
- Minimizes hydrogen inventory
- No caustic electrolytes, asbestos free
- Reliable, compact, automatic control
Production rates: .5 - 1 Nm3/h (19 to 38 scf/h)
Distributed Energy Systems makes Proton Exchange Membrane (PEM) hydrogen industrial generators the new standard for on-site hydrogen production. Related PEM products are already recognized as the technology of choice for automotive fuel batteries. HOGEN® hydrogen generators are available for broad commercial use.
|
|
As Gas Chromatograph users will probably confirm, little has changed in the past decades in the way hydrogen gas is used in the laboratory. Now that picture is set to change, thanks to a remarkable multi-disciplinary gas generator manufactured by Parker Balston. Their new paradigm solution for generating hydrogen in laboratories is so easy to use that it could potentially save thousands of Euros a year in expensive downtime and installation costs.
Four different models have been upgraded to the 100, 165, 260 and 510 ml/min units producing high purity hydrogen, 99.9999% at up to 6.89 bar. Special features include an advanced PEM electrochemical cell protection system with microprocessor controls, a unique water hydration circulation purification system. This is also complimented by USB capability with professional software options for remote monitoring and control, blue intensity back lighted display for simple operator use with professional touch screen visuals for system status checks, Automatic water fill options, and data logging performance controls for preventative maintenance with reporting tools for use in regulated environments where system validations are required.
These professional generators will allow GC (Gas Chromatograph) users to supply, control, and automate all hydrogen gas supplies. A single generator can support up to as many as 13 instruments with high purity hydrogen.
Other applications include fuel gases for total hydrocarbon industrial analyzers, supply gases for hydrogenation reactors, hydrogen for pilot scale fuel batteries assays and hydrogen for collision reaction gases.
Each generator is available as standard with a two-year warranty emphasizing the quality and reliability
Parker Balston is the worldwide leader in separation and filtration technologies, and offers a broad range of analytical gas generators to meet your specific analytical instrument requirements. All products are backed by a fully staffed field sales and service organization.
|
|
The Peak Scientific Hydrogen power generator delivers high purity gas, with reliability and safety built in to every component.
The 'cylinderfree' systems have many unique features, making them the preferred choice of laboratories requiring reliability and quality.
Using ION exchange membrane technology, originally developed for NASA, the professional generator required only deionised water (loaded automatically) to produce a constant supply of hydrogen. |
|
| The portable PEM reformer is a high performances unit that produces a hydrogen gas of quality 4.0 (99,99%) at a pressure level of 9,5 bar absolute under conditions of maximum safety. |
|
* 500l/h of pure hydrogen at 8 bars without professional compressor
* System control fully electronic
* Unattended operation 100% static
Completely autonomous and 100% automatic, this equipment with a recognized reliability is perfectly studied to the enclosed sites particularities taking account their geographic locations, the difficulty linked to the electrical smps and the communications means. |
|
* Pure hydrogen production from 0,5 to 10 Nm3/h
* Adjustable pressure from 1 to 10 bars
* System control fully electronic
All the hydrogen generation series « BP MP » are skid mounted ; the control system is fully electronic and the cooling is through natural air. |
|
TELEDYNE ENERGY SYSTEMS, INC. manufactures hydrogen generation systems designed for on-site, automatically controlled, ultra-pure hydrogen product gas generation. Delivery flows range from 1.1 nm3/hr (20 SLM) up to 56 nm3/hr (1,000 SLM) with 99.9998% purity. The industrial generators also produce oxygen as a byproduct of the water electrolysis process.
The hydrogen generation are fully assembled, skid mounted and operationally tested prior to shipment to facilitate ease of installation and commissioning. System design can also be provided to include compression and storage solutions specific to your application.
TELEDYNE ENERGY SYSTEMS, INC. hydrogen generators are currently used in power station, chemical plant, semiconductor, argon purification, metals processing, float glass, fiber optic, research laboratory, fuel cell testing, and hydrogen fueling applications throughout the world.
|
|
# Chemical process with very easy use
# 3 m3 of hydrogen gas produce in less than 10 minutes
# Especially adapted to isolated regions
# Gas reserve possible
Easy to handle, this industrial generator does not require any maintenance other than its cleaning after each hydrogen production operation. |
|
Hydrogen Plants handle synthetic gases and water-containing gases that serve the purposes of hydrotreating and hydrocraking in the oil refining industry; ammonia production, fat, coal and oil hardening; in the chemical industry where hydrogen-bearing gas mixtures are featured; as well as in the metal industry.
|
|
Claind’s nitrogen generators satisfy all laboratory analysis and industrial process needs with very few exceptions.
The range includes compact professional generators with built-in oil-free compressors suppliers, medium and high pressure generators for industrial applications, and special generators for OEM applications.
Claind’s nitrogen generators are based on PSA (Pressure Swing Adsorption) technology for maximum reliability and gas quality. Claind has also patented the Fast Purity system, the most significant innovation in the world of PSA technology in recent years. |
|
KOFLOC NT SERIES
KOFLOC Nitrogen Gas Industrial generator MNT SERIES is a medium size nitrogen generator manufacturers with a status messenger function as a standard feature. The optional touch-panel control allows professional timer operation arrange by day of the week and error logging. The adsorbent (molecular sieving carbon selectively adsorb a large amounts of professional oxygen under high-pressure condition, quickly removing oxygen carbon dioxide and moisture out of air, leaving only the high purity nitrogen gas as the final product. The adsorbent material releases oxygen when depressurized. High-purity nitrogen gas can be produced continuously by PSA (pressure swing absorption), which is a method of alternately pressurizing 2 adsorption vessels.
FEATURES
♦ Fully automatic
♦ Compact
♦ High-purity and dry (–55˚C or less) nitrogen gas can be obtained
♦ Oxygen sensor, gas flow meter, flow regulator valve and the messenger function as standard features
♦ Optional touch-panel for timer-operation and error-logging
APPLICATIONS
* Substitution for nitrogen gas cylinders
* For heat treatment processes
* Semiconductor processes
* CA storage gas for fruits and vegetables
* Non-oxidization industrial seal gas
* Explosion-proof or rust-prevention gas
* Seal gas for shipping
* Blanket gas for synthetic fibers and melted spinning |
|
| The combination of these technologies produces a continuous on-demand supply of pure nitrogen. Typical applications include nebulizer gases, curtain gases, source gases, chemical and solvent evaporation, instrument purge and supply, evaporative light scattering detector use and sparging. |
|
Nitroflow BASIC
autonomous 100%, with a reduced maintenance, Professional generators Parker the nitrogen replace the gas bottles and the liquid nitrogen supply.
Applications: inertage, network of nitrogen, packaging of foodstuffs...
Based on membrane technology, Nitroflow BASIC is the nitrogen generator manufacturers with the most compact, esthetic integrated compressor and industrial silencer of the market (<55 dBa). it produces nitrogen in any safety 24:00 /24H, until 1,5 Nm3/h.
It integrates a piloting by microprocessor, a control and adjustment of the parameters of work on touch display and an professional analyzer of O2 to visualize the nitrogen purity. The strong point of the system: the compressors manufacturer have one lifespan longer than those of our competitors (patented exclusive system). 2 years or 8000 operating hours exclusive guarantee.
Ideal solution to replace a nitrogen bottle/day. |
|
ERVW
Charge removal layout freely selectable
Easy side-by-side connection for wide areas
Excellent ion balance due to high frequency |
|
Conveyostat In-Line Static Control Systems are designed to provide in-line static elimination for neutralizing static charges on materials in pneumatic conveying systems. The Conveyostat eliminates clogs caused by static charge buildup within the conveying system. Once the static charges are eliminated, products flow freely and productivity increases.
The Conveyostat is typically mounted at the input to a cyclone or collection vessel so that trim or other conveyed materials are neutralized as they pass through the unit.
Conveyostats come in standard diameters ranging from 1.5" to 12", with larger sizes available. Units are constructed of stainless steel and powered by a Dual Phase Industrial power supply (120VAC, 60Hz input). Both indoor and outdoor versions are available.
Click the Application to see an example of a Conveyostat being used to eliminate static on slitter trim going into a cyclone |
|
Hydrogen generator HG2000
There are three hydrogen generator models in the HG2000 Series, offering outputs of 200 to 600 Nl/min and gas purity ratings in excess of 99.9995%. Thanks to their compact dimensions, these units can easily be positioned near the analysers they feed.
These professional generators are equipped with a microprocessor control system, a liquid industrial crystal display to inform the operator of generator status in real time, and a membrane keyboard for setting main gas delivery parameters. HG2000 Series reformers are also equipped with an effective alarm system to warn the operator of any system malfunctions.
|
|
| A full range of laboratory gas industrial generators are available including UHP Hydrogen, Nitrogen, Zero Air and CO2 Free Air. |
|
HOGEN GC reformers provide ultra-pure (99.9999%) pure hydrogen for a wide variety of laboratory and small scale industrial applications such as:
- Carrier gas for Gas Chromatographs (GCs)
- Fuel gas for flame ionization detectors (FID¹s) used with GCs
- Fuel gas for Trace Hydrocarbon Industrial analyzers
- Hall detector reaction gas
- Plus hydrogen for other precision instruments and chemical research |
|
Dimensioning range from 26 Nm³/h up to 320 Nm³/h at purity
up to 99.5 %.
Due to the development of special fibres filtrating pneumatics very efficiently, this plant achieves unchanging purity grades.
The IMT-MN is a cost-saving alternative to the traditional supply
by gas-bundles or tank installations.
As an option these plants are available in stainless steel or ATEX
dessign. |
|
A complete range of membrane module sets offers you the possibility to integrate your own nitrogen source. Your requirements can always be met thanks to the different sizes and membrane performance available.
The smallest module only measures around 30 centimetres in length and the largest around 1.5 metres. Due to the different measurements there is surely a module that will fit the equipment you are designing. |
|
Oxygen from the socket.
Oxygen supply without extensive logistics at purity range up to 40 %.
These membrane industrial generators provide a continuous supply in the
capacity range of 150 ltrs./min. up to 2000 ltrs./min. at O2 purity
grades from 30 - 40 %. |
|
|
|
Technical gas production equipment
