|
|
Factory Adjusted Belt Tensioner
This new belt tensioner design is based on the fixed motor principle that relies on a movable idler to properly tension the belt rather than tensioning with a motor mounted to a moving slider plate.
The new design takes the guess work out of changing and adjusting a manufacturer of spindle drive belt in the field. The tensioner is factory set to take the guess work out of setting drive belt tension. Pre-drilled and aligned tensioning brackets ensure the new belt is set to original specifications eliminating the possibility of over-tensioning a spindle drive belt- a very common cause of spindle failure.
Advantages
Increased rear manufacturer of bearing life due to the fact that it becomes no longer possible to over-tension the belt. The proper tension of the belt is determined and set at SETCO to provide optimal life and performance on a per application basis.
The new, robust cast aluminum mounting bracket (Belt Guard) offers a much stronger, more rigid structure to support the motor.
Increased belt life...proper tension eliminated premature belt wear.
Because the belt geometry is fixed by the idler, it reduces the time required for belt replacement.
Once the motor is aligned and mounted to its mounting plate, it never needs to be adjusted or moved. This eliminates the need for special equipment availability such as an over head professional crane.
The new design uses common parts for mounting the motor facing the spindle nose or towards the rear. The parts are used regardless of spindle rotation direction.
|
|
ROSTA chucking device type SE/SE-G/SE-W
ROSTA chucking device SE-F
ROSTA chucking device IS (INOX)
ROSTA chucking device type SE-B "boom rank"
ROSTA professional belt tension adjuster type KSE
ROSTA of professional chain professional wheels and chain wheel-corrodes type N
ROSTA chain glider and chain-glider-corrodes type P
ROSTA cylindrical idler type R
|
|
Magnetic Technologies Ltd. offers custom payoff stands and devices that maintain constant tension through the use of permanent magnets.
• No belts or industrial chains are used
• Available in several sizes. |
|
You can choose from the world's largest selection of high-quality, professional shaft-ready sprockets to solve all your application problems. In-stock hardened sprockets, a Browning specialty, are warranted to last at least twice as long as the standard (un-hardened) mild steel sprockets they replace. The result is increased professional chain life and reduced downtime.
Additionally, you have the industry's broadest selection of sprocket mounting choices. Sprockets are available with three types of bushings to ensure secure mounting to shaft:
|
|
Sprockets are a crucial factor in the efficiency and service life of any chain system. For this reason, we at KettenWulf focus on manufacturing our own
sprockets since chain and sprockets from one source ensure a maximum of operational hours.
Besides sprockets in all DIN/ISO/ANSI standard pitches and tooth forms, our product range includes tailored solutions with optimum tooth shapes and sprocket sizes, of course. Whether you need sprockets of high-grade materials, with special heat treatment, and additionally indiction-hardened
teeth – KettenWulf always has the right solution for you.
We provide matching sprockets for all types of chain. Besides producing sprockets with DIN standard tooth forms, our Cnc devices can also be used to produce sprockets with optimized tooth shapes. Products made of high-grade materials, heat treated and with additionally induction-hardened teeth are the standard in our company.
Our production spectrum includes all sprocket designs, including sprockets with one-sided hubs and sprockets with two-sided hubs, split-type sprockets, sprockets with detachable tooth shells or tooth segments,
shear-pin sprockets, pinion sprockets, as well as sprockets with patented noise-reduction features and wheel systems. |
|
From plate type single blank sprockets to multi-row finished bore sprockets or custom make to your specifications.
Provide not only standard sprockets, taper bore sprockets, special sprockets and gears. |
|
Sprockets, professional wheels and platewheels:
8mm pitch : Simple
9.525mm to 76.20mm : Simple, duplex, triplex
Special sprockets
Taper lock sprockets
Tensioner sprockets
Stainless steel sprockets
Taper lock professional bushes
|
|
For our Round Steel Chains, Bushed Conveyor chain manufacturers, Forged Link Chain and Cardan Chain we offer suitable drive and tail sprockets in different grades and designs.
Conveyor manufacturers Chain form one unit. In order to obtain an optimal operating condition in a conveyor system, we recommend the exclusive use of THIELE products. For mounting instruction, maintenance and service, please ask the expert THIELE personnel. |
|
Ramsey offers a full range of stock and made to order sprockets in pitches ranging from 3/16” pitch to 2 1/4” pitch. Stock sprockets, because they are produced in large quantities, are often the most economical choice. Made to order sprockets provide an almost unlimited range of options and are a large part of our daily professional production.
All sprockets can be fully machined to your exact specifications or they can be supplied with an unfinished bore to allow secondary machining. Ramsey also supplies sprockets to replace most
competitors' products. We welcome all inquiries.
|
|
WM Berg manufactures a wide variety of cable chains, molded belts, sprockets and pulleys. The belts consist of polyurethane plastic molded over either a single or double stainless steel core.
The belts are lightweight, self-lubricating, come in infinite lengths, are field spliceable with a stainless steel splice.
The stainless steel constructed chain series offers long life, high tensile loads, and is available in many different pitch configurations.
Comparable pulleys and sprockets are offered in stainless steel, aluminum, or plastic in bore size ranges of 1/8" (3mm) diameter to �" (12mm) diameter and are available up to 300 teeth. |
|
| ... products without technical information |
| |
|
|
Chain pinions
