|
|
Ball Screw Jack.
Stainless Steel execution available.
Capacities from 1 Ton to 30 Ton.
Stroke on request.
Body with Base or Pivoting feature.
Upright or Inverted Screw.
Translating or Rotating Screw.
Motor applications.
|
|
Metric and Imperial Ball Screw Jacks designs in translating and rotating screw formats in upright or inverted types are available in capacities up to 500kN ( 50 Ton). 2 gear ratios and 2 screw leads as standard, Options include Pre-loaded ball nut, Anti-rotation (keyed), 6 mounting options including trunnion and double clevis.
The Metric Ball Screw jacks have the extra advantage of an integral safety device as standard.
|
|
For applications requiring linear movement, SIPCO offers a complete line of TechnoMotion® products. Please contact us for questions regarding our linear movement products, our inventory, or specific applications.
LINEAR ACTUATORS-ACME and Ball Screw
SCREW JACK-ACME and Ball Screw
BELT DRIVE-Precision Belt Pulleys
PRECISION BALL SCREWS-Ground, zero backlash
BALL SCREWS-Rolled Design
|
|
|
|
|
|
Joyce/Dayton - Established 1873
Joyce Ball Screw Jacks feature a ball nut with integral ball bearings that recirculate along the surface of the ball screw. The significantly reduced friction between the ball nut and screw results in greater efficiency, with up to 2/3 less input torque required to move the load than a similarly rated machine screw jack.
Compared to Machine Screw Jacks, Joyce Ball Screw Jacks
- Require less motor horsepower
- Allow higher travel speed
- Provide an extended duty cycle
Joyce Ball Screw Jacks are available in translating screw or rotating screw (keyed for traveling nut) designs. Translating screws are available with threaded, load pad, clevis or plain ends. Options include limit switches, encoders, geared potentiometers, direct drive and reducer mounts, and protective boots. Joyce Ball Screw Jacks are ideal for single or multiple jack systems.
Unlike Machine Screw Jacks, Ball Screw Jacks are not self-locking. Because they will lower under load, a brake motor or other external braking mechanism is required.
|
|
Nook ActionJac Worm Gear Screw Jacks are mechanical actuators that utilize a bronze worm gear with a screw.
Nook offers a complete line of standard and custom engineered ball screw and machine screw actuators for applications from 1/4 ton up to 100 tons. Standard configurations including upright or inverted units with translating or rotating lifting screws. Top plate, threaded, or clevis ends are available for meeting specific application needs. Actuators can be used individually or in mutliple jack arrangements for a larger mechanical system.
|
|
|
Series-S high duty screw jacks are a range of metric cubic screw jacks designed to have a higher duty cycle and mounting flexibility over conventional worm gear screw jacks. Typically the duty cycle can be extended by 50%. The higher duty rating has been achieved by improving the design of the jacks worm gearbox. The screw jacks are available in capacities from 25kN to 200kN in both translating and rotating screw configurations.
|
|
|
The mechanical actuators High Performances of series VMP are particularly adapted to the most demanding applications, requiring strong loads with high speeds and important races. With Trapezoidal screw 1,2 or 3 nets, or with ball screw, they are available out of relocating screw (VMP-A) or revolving screw (VMP-B). The lengths of screw are adapted to each application. - 9 sizes from 500 to 50000 daN - - Many options such as covers, kneecaps, plates, pivots, selflocking nuts, detection of wear, race ends, encoders, potentiometers of recopy, etc... - All types of motorization: Three-phase current - Single-phase current - D.C. current - Brushless.
|
|
|
The Duff-Norton line of screwjacks (mechanical actuators) includes mechanical actuators (machine screw and ball screw) ranging in size from 1/4 ton to 350 tons, stainless steel machine screw actuators, micro-miniature actuators, high duty cycle actuators, motorized machine screw and ball screw actuators, electric cylinders and motor control systems. Accessories include miter gear boxes, c-face motor adapters, limit switches, transducers, visual and digital position indicators, couplings, ball screws and ball screw systems, and locking rings. Mechanical actuators are also used for raising and lowering maintenance platforms, opening and closing air dampers, oven doors and sluice gates, and adjusting tooling machine beds, cable tension and workplace tables. In addition to the broad range of applications and industries for mechanical actuators, they are also used as alternatives to hydraulic and pneumatic systems.
|
|
T1 T2 T3 T4 T5
Travelling screw
R1 R2 R3 R4 R5
Travelling nut
Max force: 5 KN / 10 KN / 25 KN / 50 KN / 100 kN
Gear ratios: 1:4 1:10 1:16 1:30
Acme screws: 18x4 / 20x4 / 30x6 / 40x7 / 55x9
Stroke length: on request
Motors: 1ph - 3ph Vac / Vcc
Accessories for T Models: inductive or mechanical limit switches
Accessories for R Models: integrated limit switches, rotative potentiometer
|
|
The linear actuator solution for any load, any distance, any environment with the original Serapid rigid chain inside.
Key benefits
stroke: 1 meter (3,2 ft) to unlimited
capacity: 1 kN to 160+ kN
harsh-environment models
|
|
|
Linkage components comprised of a rod (bent or straight) with ball joints, rod ends or clevis end fittings used as shift, clutch, throttle, steering, accelerator or other types of mechanical controls for lawn and garden, truck, bus, construction, agricultural equipment, recreational vehicles and more.
|
|
Venture produces a variety of Manual Screw Jacks Including;
Fifth Wheel Landing Gear, Used primarily in the RV industry, but suitable for many other applications, 2 1/2" square outer tube, 8000 lbs dynamic load (4000 lbs. per leg) No Load Bearing Welds and available in a variety of mounting options.
12,500 lb. static / 8,000 lb. dynamic. 2 1/4" diameter Outer tube Manual Jack used primarily in the Manufactured Housing Industry.
5,000 lb. static / 2,500 lb. dynamic. 2" diameter Outer tube Motorized Jack used primarily in the RV Industry.
We also produce many varieties of custom actuators.
|
|
|
Rack & pinion jacks load 1,5 t to 10 t (fig.) withself-locking security crank, keeps the charge in every required position - for pulling or pushings. Special versions on request: - different length of rack - different lift - drive shaft to connect several jacks - with internal brake and removable crank
|
|
The steel jack is standard equipment for tool and machinery shops, contractors, shipyards, agriculture and workshops:
our steel jack with fixed lifting claw can be delivered with different types of hand crank for lifting the jack shaft along the rack. It offers a very long service life due to its high quality spur gear, precise worked crank gear as well as additional worked pawl.
|
|
Rack & pinion jacks load 0,5 t and 1 t, with self-locking worm gear for lifting, for lowering, adjusting and fixing of mechanical components, devices, machines, etc.. 0,5 t version also available in stainless steel
robust version with milled rack and hardened driving parts, for in- and outdoor applications
Special versions against additional charge:
- an other lift or length
- an other crank version
- an other fixing possibility
- an other surface treatment
|
|
Our vertical range comprises 5 products:
LinkLift 50 - LinkLift 50 R - LinkLift 80 - LinkLift 100 - LinkLift 100 R
LinkLift 50R * and LinkLift 100R * are renforced versions of the LinkLift. In these cases the chain is equipped with 2 additional rollers per link, whilst the drive housing has 2 additional pinions allowing the dynamic capacity to double.
|
|
Chainlift was designed for lifting short travel, table type lifts.
The basic principle is identical - the chain is stored horizontally and forms a rigid pushing bar as it is driven through the drive housing, thus applying thrust under a platform.
The drive is generated by the rotation of pinions on rollers, forcing the links to lock and move through the housing.
|
|
|
Roller screw jack provide higher performance compared to ball screw jacks. Ideally suited to applications where a high dynamic load, high accuracy, high speed and a long life are required.
|
|
Micro Screw Jack.
Position indicator with centesimal scale.
Manual control or motorized with feedback.
|
|
Steel Screw Jack.
Capacities from 0.5 Ton to 150 Ton.
Stroke on request.
Body with Base or Pivoting feature.
Upright or Inverted Screw.
Translating or Rotating Screw.
Motor applications.
Bevel Gear and Pinion Screw Jack.
Size from 5 ton to 50 ton.
Ball screw models.
Anti-Rotation device.
|
|
Our Screw Jacks with their wide torque range and our extensive experience assembling complete packages ensures we can help you solve your difficult linear motion design challenges with our screw jacks solutions.
Series BD | Screw jacks
Screw Jacks are the ideal product to push, pull, lift, lower and position loads of anything from a couple of kilograms to hundreds of tonnes. Many of our customers prefer our Series BD Screw Jack in preference to hydraulic or pneumatic jacks because of their greater precision and consistency.
|
|
- Duff-Norton offers a complete line of both standard and custom engineered machine screw actuators for applications up to 350 tons.
- Duff-Norton Ball Screw actuators come in many standard models, or can be custom designed for any application up to 50 tons.
|
|
Gear with spindle and support tube for stepless height adjustment for sit/sit or sit/stand work stations
- low priced
- small assembly dimensions
- high speed for adjustment
- in combination with our motor drive KTS 3143 the ideal solution for your height adjustment
|
|
Gear for stepless height adjustment, mainly for manual sit/sit work stations.
- Ratio 1:1 or 1,33:1
- Glass fibre reinforced plastic housing
- Hardened steel gear cogs
- 1200 N load
- Output spindle for push force only
|
|
SJA20 screw jack
features:
High load: Load capacity from 500kg to 30 tons
Self-locking: The majority of the products
possess the self-locking function which
increases the security of the equipment.
Precision control: the positioning accuracy
can reach 0.1mm.
Synchronous: the synchronous rise
or fall can be achieved through the
mechanical connection of screw jacks.
Modularized combination: can be equipped
with encoder, motor, acme motor, gear motor etc.
Others: easy maintenance, low noise, can work
normally under special environment.
|
|
|
Screw jack (Mechanical Actuators) are used in linear motion applications to push, pull, lift or lower loads for actuation or precise positioning purposes. They are available in metric or Imperial designs, with load rating from 5 kN to 3500 kN using machine screw, ball screw or roller screw drives in single face, cubic or corrosion resistant housings.
|
|
|
The mechanical actuators of series VME Eco are particularly adapted to the applications requiring a good performance ratio/price. With Trapezoidal screw 1,2 or 3 nets, or with ball screw (only on model with revolving screw), they are available out of relocating screw (VMP-A) or revolving screw (VMP-B). The lengths of screw are adapted to each application. - 6 sizes from 500 to 20000 daN - - Many options such as covers, kneecaps, plates, pivots, selflocking nuts, detection of wear, race ends, encoders, potentiometers of recopy, etc... - All types of motorization: Three-phase current - Single-phase current - D.C. current - Brushless.
|
|
Mechanical Screw Jack – European Heavy Series
SEP (50-1500KN)
• Mechanical screw jack with housing made of Grey Cast Iron (SEP 1000 & SEP 1500 are made of welded carbon steel).
• 7 different sizes (SEP50, SEP100, SEP200, SEP300, SEP500, SEP1000, SEP1500).
• 2 different reduction ratios for each size.
• Lifting/thrust capacity up to 1500KN.
• Lifting/thrust speed up to 9000mm/min.
• “T” version, featuring Trapezoidal spindle (self-locking).
• “S” version, featuring Ball Screw spindle (high efficiency).
• Grease lubricated.
Strong industrial design provides maximum performance together with highest reliability, to face most difficult applications in harsh and severe environments.
Wide range of standard accessories/features.
Special execution on request, please contact Setec Group Italy.
|
|
Mechanical Screw Jack – European Light Series
SEL (2,5-100KN)
• Mechanical screw jack with housing in Aluminium alloy.
• 5 different sizes (SEL5, SEL10,SEL25, SEL50, SEL100).
• 3 different reduction ratios (1/5, 1/10, 1/30).
• Lifting/thrust capacity up to 100KN.
• Lifting/thrust speed up to 15200mm/min.
• “T” version, featuring Trapezoidal spindle (self-locking).
• “S” version, featuring Ball Screw spindle (high efficiency).
• Grease lubricated.
Modular and compact cubical design provides maximum adaptability to each specific application.
Wide range of standard accessories/features.
Special execution on request, please contact Setec Group Italy.
|
|
|
Venture Jack systems have become the Manufactured Housing and Recreational Vehicle Industry standard. They can be manually operated or Motorized, They are Acme Screw Jacks available in a variety of styles for various applications. The standard Jack comes with a Drop tube and a Heavy Duty Foot Plate and is also available with optional manual crank handle and telescoping cross tubes. We can produce a custom jack system to meet your needs, whether for service or new OEM installation. Load ratings up to 10,000 lbs. they can be used for adjusting and supporting, for leveling and dislocating, etc. - All steel tube construction - spindle with self-locking, maintenance free, Acme screw drive - maintenance-free bevel gears - easy and secure operation - easy to mount - Easily customized to suit your application
|
|
|
|
Screw jacks
