Torque limiters

59 companies | 248 products
Filters
  • What’s new?
low friction hub - max. 80 °C | 09.1080.0040

ROTAFRIX frictional wheels, with CR vulcanized onto the metal part, have certain characteristics like enabling the use of rubber roller gearboxes and economical...

low friction torque limiter - 09.1060.2001

Cast iron and steel are the main materials used for the construction of this item. In addition to this, the lining is asbestos-free, being made entirely of organic material. At the torque limiters, torque is...

{{productDetail[5082]}}
low friction torque limiter - max. 6 800 Nm | RUFLEX® series

The RUFFLEX Standard comes off more accurate in calculation as long as the data are also accurate. It is consists of torque...

overload clutch / security - max. 400 Nm | SYNTEX® series

The SYNTEX Standard torque limiter is designed for exacting torque dimensioning, and for securing high-quality drive units. It functions...

overload clutch / security - max. 280 Nm | SYNTEX®-NC series

SYNTEX-NC is a safety clutch with zero backlash, low weight and mass moment of inertia. It is a compact clutch with a clamping ring design that is easy to assemble and large bore diameters. Its design is based on...

safety coupling - max. 8 200 Nm | KTR SI series

The KTR-SI with ROTEX (by KTR) features a protective coupling with up to 8.200 Nm, a shaft-to-shaft connectivity capability,...

{{productDetail[14739]}}
overload clutch / security - 5 - 1 500 Nm | EAS®-compact® series

The EAS-Compact torque limiting clutch for backlash-free torque transmission between shaft and drive...

torque limiter - 2.7 - 500 Nm | EAS®-smartic® series

EAS-smartic are MAYR'S torque limiter designed and developed for an easy and simple torque adjustment....

overload clutch - max. 190 000 Nm | EAS®-elements series

The torque limiters from MAYR is used as a protection for high torques. It is ideally...

pneumatic torque limiter - max. 2 500 Nm | EAS®-Sp/-Sm/-Zr series

The EAS-Sp/-Sm/-Zr Line of torque-limiting clutches from Mayr are considered to be the perennial torque-independent...

axial force limiter - max. 300 000 Nm | EAS®-axial series

Designed to limit tensile and pressure forces, the clutch EAS-axial...

{{productDetail[210]}}
torque limiter - 5 - 2 000 Nm

This range of mechanical torque limiters are available as multi or single position, detent/ball interface torque overload units. They are designed to shield drive and driven parts from...

torque limiter - 40 - 24 000 lb.in

Torque Limiter devices from Nexen protect mechanical instruments, or any of their production results from...

{{productDetail[13614]}}
torque limiter - 40 - 24 000 lb.in

Tsubaki Emerson mechanical and electrical safety devices provide overload protection for various applications....

{{productDetail[5083]}}
electromagnetic powder torque limiter - 0.06 - 85 Nm

Merobel's torque limiters can be easily integrated into any type of system. They are capable of rapid response,...

{{productDetail[7583]}}
overload clutch - Safegard series

The overload clutches of the Safegard series serve as safeguards against overload of high torque values. These highly compact units are compatible with other units currently available on the market and offer a cost-effective, low-maintenance alternative, with...

overload clutch / zero-backlash - 5 - 740 Nm | CZ, CN series

CZ series of Zero backlash Overload Clutches and Couplings can be accessed in 8 different basic types and 12 basic sizes with pole diameters ranging between 8mm and 60mm. It offers protection against excess overload...

overload clutch - max. 125 000 Nm

Sheargard Overload Couplings offer low-cost protection on functions where torque control and shaft synchronization are needed....

overload clutch - 2.5 - 8 200 Nm | CS series

Crosse-Morse's CS Series of standard overload clutches come in 8 different sizes, each integrated with 3 operating modes: simple overload, synchronous overload, and safelift. They are also available in 7 sizes of the maximum dis-engagement...

overload clutch - 2.5 - 400 Nm | CS Mini series

The CS Mini series of clutches comes in 4 sizes. The device is equipped with simple overload and synchronous overload facility. It can attach sprockets using either gears or pulleys....

{{productDetail[20096]}}
torque limiter - RA, LT, LT

The RA, LT and LR are torque limiters and overrunning clutches. The Bondoli and Pavesi designed these equipment with the capability of responding...

torque limiter - RL, FT, FNV

These torque limiters are lubricated and come with overriding clutches for greater efficiency and less maintenance. The design of global...

{{productDetail[6240]}}
glass bead torque limiter / friction-free - max. 740 Nm | SIKUMAT® ST

Rindspann offers the SIKUMAT® ST Torque Limiter used for ratcheting purposes. The device is free from backlash in both directions of rotation. It is designed with an integrated...

roller torque limiter / friction-free - max. 10 000 Nm | SIKUMAT® SA

The SIKUMAT® SA Synchronous Ratcheting features double rollers, enabling a high level of consistency in torque limiting throughout the operation....

roller torque limiter / friction-free - max. 1 800 Nm | SIKUMAT® SR

The Sikumat® SR is a disengaging torque limiter with a clamped bearing. The unit disengages when an overload separation of both the input and the...

roller torque limiter / friction-free - max. 10 000 Nm | SIKUMAT® SB

The SIKUMAT® SB is a synchronous disengaging torque limiter manufactured by Ringspann. The unit is designed with double rollers.

It features an optimum degree...

roller torque limiter / friction-free - max. 1 800 Nm | SIKUMAT® SL

The non-disengaging Sikumat SL with rollers are made to function when the present limit torque has been attained. They are equipped...

{{productDetail[14886]}}
torque limiter - 0.02 - 85 Nm

These torque limiters are developed from the magnetic particle brakes and participates from the advantages of soft iron particles within a magnetic field. The electric coil is replaced by a permanent magnet. The iron particles influenced by the magnetic field...

{{productDetail[14780]}}
torque limiter - max. 230 000 Nm

Ortlinghaus multiplate safety clutches are permanently engaged, this condition being maintained by spring pressure. They are able to transmit torque up to a particular, preset level, after which in the case of an overload in the transmission, they are designed, to slip for a limited period of time. They can thus be used to safeguard all types of transmission...

{{productDetail[13855]}}
torque limiter with sprocket wheel - 0.3 - 5 000 Nm | TF series

Sankyo's TF Series features a low profile, ground pilot design for flange mounting of dials, hub less gears, and sprockets. Sankyo's design uses five detent pockets with a pin type configuration which enhances lubrication while reducing the pocket vacuum thus eliminating inconsistent overload conditions. A patented pocket design and hardened metal components...

torque limiter with elastic coupling - 0.3 - 5 000 Nm | TC series

Sankyo's coupling type TC Series adjustable clutch has the same characteristics of a low backlash coupler. The innovative design compensates for shaft angular misalignment, offset parallelism & shaft end clearance error....

torque limiter - TAD series

Sankyo's Alpha series flange-type (TAD-type) torque limiters are overload...

torque limiter - To series

Sankyo America's To-type torque...

torque limiter with elastic coupling - TR series

Sankyo's coupling-type (TC-type) torque limiter is an overload protection device designed for use as an intermediate transmitting element of rotation. The ball bearings for transmitting torque are seated in a groove parallel to the shaft line. This pre-loads the ball bearings radially and ensures sufficient rigidity in the rotating direction....

{{productDetail[16451]}}
torque limiter - 0.3 - 5 000 Nm | TF series

This safety device works only against overloads in the direction of rotation. It has many...

torque limiter - 2 - 600 Nm | TNF series

The TNF Series is based on the TF Series...

low-inertia torque limiter - 10 - 110 Nm | TRF series

This safety device has only a third of the inertia of our...

torque limiter - 40 - 5 500 Nm | TAD series

This overload protection device was developed to be used on the output table...

torque limiter - 80 - 1 000 Nm | To series

This TorqueLimiter is designed to mount on large diameter dials, such as the...

{{productDetail[9160]}}
torque limiter - 1 000 - 20 000 kNm

Torque-limiting couplings from Voith protect all components in the driveline. In the event of a catastrophically high torque occurrence, the couplings interrupt the power flow in the driveline;...

{{productDetail[39449]}}
torque limiter with sprocket wheel - 0.1 - 2 800 Nm | SK1 series

Model SK1 from 1.5 - 10 Nm with clamping hub.
Model SK1 von 15 - 2,800 Nm with conical clamp.
Absolutely backlash free through the frictional clamping connection.

Temperature range:

-30°...

torque limiter with sprocket wheel - 0.1 - 2 800 Nm | SKP series

Pure keyway connection.
Torque limiting element is backlash free.

Temperature range:

-30°C to +120° C (-22° F to +248°F)

Service life:

Maintenance...

torque limiter with sprocket wheel - 5 - 1 800 Nm | SKN series

With clamping hub and 1 radial screw ISO 4762.
Absolutely backlash free through frictional clamping connection.

Temperature range:

-30° C to +120° C (-22° F to +248° F)

Service...

torque limiter with elastic coupling - 0.1 - 1 800 Nm | SK2 series

With clamping hub and 1 radial screw ISO 4762.
Absolutely backlash free through frictional clamping connection.

Temperature range:

-30° C to +100° C (-22° F to +212° F)

Service life:

Maintenance...

torque limiter with elastic coupling - 5 - 2 800 Nm | SK3 series

With tapered conical clamp and removal jack screws.
Absolutely backlash free through frictional clamping connection.

Temperature range:

-30° C to +100° C (-22° F to +212° F)

Service...

{{productDetail[7145]}}
torque limiter with elastic coupling - 5 - 2 800 Nm | SK3 series

The first complete line of SAE “A” through SAE “F” mount overhung load adaptors was designed by ZERO-MAX. Zero-Max has set the industry standard with the overhung load...

torque limiter with elastic coupling - 5 - 2 800 Nm | SK3 series

Torq-Tenders are Overload Safety Devices with Torque Limiters which provide reliable overload protection. When a jam-up or excessive loading occurs the Torque Limiter will reliably and quickly release to prevent system damage.

These torque limiters are tamper-proof. Once installed, the torque value cannot be changed. This is an important feature that ensures the integrity of the machine...

{{productDetail[14292]}}
torque limiter - DSM

Safety device with full steel construction offering
high mechanical strength
Free rotation after disengagement...

low friction torque limiter - 2 - 23 000 Nm | DF Series

Overload protection device with a sprocket mounted between two friction discs that slide without disengaging when it reaches the pre-set peak torque. The torque is adjustable...

glass bead torque limiter / friction-free - 7.5 - 1 450 Nm | EDF, F Series

Economical overload protection device with ball transmission via a customized sprocket that disengages fully when it reaches the pre-set peak torque. The torque is steplessly adjustable by altering the...

roller torque limiter / friction-free - 2.5 - 12 000 Nm | DSS, DSR Series

Overload protection device with Ball or Roller transmission, which disengages fully at the pre-set peak torque. The torque is steplessly adjustable by altering the spring pressure.
...

torque limiter - 0.7 - 750 Nm | DSS, SG Series

A backlash free overload protection device with ball transmission, that disengages fully at the pre-set peak torque. Very high sensitivity possible with...

{{productDetail[14240]}}
{{productDetail[63469]}}
torque limiter - SOTL / ATT

The Safety Output Torque Limiter (SOTL/ATT) is a safety device manufactured by Italplant for placement on the motor's input shaft. The limiter makes use of the Italplant-patented SOTL system, designed for protecting...

disc spring torque limiter - SITL

The SITL model is manufactured by Italplant, and is a safety input torque limiter that is integrated...

overload clutch - LCI

The External Torque Limiter LCI from Italplant is a security system that is placed at the...

{{productDetail[112027]}}
Subscribe to our newsletter
Thank you for subscribing
There was a problem with your request
Invalid email address

Receive updates on this section every two weeks.

With DirectIndustry you can: Find a nearby distributor | Contact the manufacturer to get an estimate or a price Examine product characteristics and technical specifications | View PDF catalogs and other online documentation