Cleaning Machine (FX Series)
A Disk and Substrate cleaning machine for mass production machine. A high washing ability achieved by multiple washing process, keeps disk clean after wash and small footprint. It is ideal for cleaning in the substrate ...
New, patent-pending trueDGS technology from the GE's Inspection Technologies business has allowed the company to develop and introduce a range of ultrasonic trueDGS angle beam ...
GE Inspection Technologies' rotary test systems have their origins in high-precision testing of pipes and heat-exchanger tubes for nuclear applications in the 1960\'s. The ROTA 25 and ROTA 45 Z inspection systems are designed for this dimension range.
Now, the ROTA Series is a probe rotating ultrasonic system also for bar and hot processed pipe inspection from 5 mm up to 450 mm (0.20 to 17.72 ...
Maximum precision and repeatability for DGS flaw sizing method
Durable, ergonomically designed die cast housing
Replacement soles (sold separately) for ...
State-of-the-art ultrasonic bolt measurement allows you to know exactly what bolt load is retained.
Key Features:
Portable, handheld units.
Battery operated.
...
The SmartView Web and Surface Inspection system is a complete solution for the inspection of surfaces and webs moving in a continuous fashion as they are being produced or converted. The SmartView system enables you to detect, identify, and visualize defects in these materials as they are being produced at full production speeds.
There are SmartView systems for many industries including Metals, ...
ROMER Tube Inspection Solution
The ROMER Tube Inspection System can inspect and measure round metallic and non-metallic wire, tubing, and piping used in almost any industry - automotive, aerospace, shipbuilding, medical, machinery, ...
This mechanical set, compact and easy to incorporate into systems, includes a mobile element pneumatically controlled and holds the welding head.
Robust and stiff, with a precise motion, and sometimes equipped with an encoder, it guarantees the good welding quality.
Compact and interactive, ...
The MPD 600 is a highly developed device for measuring partial discharges (PD). With excellent tools, even the smallest PD pulses are separated from interference and analyzed. The MPD 600 is suitable for many different PD measurement applications.
With ...
To take action on weak insulations quickly, the failure location must be known. Upcoming insulation defects already produce measurable partial discharges (PD). These partial discharges emit electrical impulses and acoustic signals at the same time.
The PDL 650 measures acoustic ...
Eddy current testing is a noncontact method used to inspect nonferromagnetic ...
The OmniScan MX ECA test configuration supports 32 sensor coils (up to 64 with an external multiplexer) working in bridge or transmit-receive mode. The operating frequency ranges from 20 Hz to 6 MHz with the option of using multiple frequencies in the same acquisition.
Benefits ...
Olympus eddy current probes consist of the acquired brands of Nortec and NDT Engineering. We offer more than 10,000 standard and custom designed ...
Testing system for defect inspection on glass surfaces in the versions RC robotic or RC compact. Ensures ...
Surface inspection of grinded and polished metal, detection of typical defects like scatches, ...
RC robotic is used on reflecting surfaces for reliable defect detection for objects of approx. DIN A4 size. Depending ...
When producing wood-based panels, such as particle board, fibreboard, OSB, plywood and veneered panels, air voids and unbonded areas may occur. Depending on size and frequency, they can represent a loss ...
Anyone who wants early detection of defects in the wood-based panel, should use the GreCon Delamination ...
Each panel is inspected by a camera system that is installed above the material flow. Defective areas are detected where the surface pattern differs from the normal (perfect) pattern. Each defective area is classified (characterized) in light and dark defects. The operator can easily change ...
The Torrent permeability tester permits a rapid and non destructive measurement of the quality of the ...
The Pundit Lab builds on the successful Pundit® tradition. It has all the functions of the classic Pundit 7, but offers additional benefits. Designed with laboratory use in mind, its compact size, rugged construction and optimized power consumption make it equally suitable for on-site use.
Along with the traditional transit time and pulse velocity measurement, Pundit Lab offers path length measurement, ...
The ultrasonic test equipment Pundit Lab features online data acquisition, waveform analysis and full remote control of all transmission parameters. Along with the traditional transit ...
Online process monitoring in laser material processing
Examples of use:
in welding: laser beam, hybrid, cladding, brazing and drilling tasks
used in
automotive engineering
shipbuilding
railway vehicle construction
aircraft construction
System types/Lasers:
...
Optical online seam inspection system
Examples of use:
laser beam welding, hybrid welding, cladding
MIG, MAG and plasma welding
used in
automotive engineering
shipbuilding
railway vehicle construction
...
TC200 is used to measure concrete crack depth by applying principle of acoustic diffraction. It also can be used to measure propagation velocity of ultrasonic ...
Sampling frequency reach up to 160MHz
Color TFT LCD display
Memory up to 1024 A scanned images, parameters and 64000 thickness values
32 detecting channels are available with ...
The DDX 9121 partial discharge & radio interference voltage detector is the perfect solution for multi-phase partial discharge & radio interference voltage testing.
The ...
HOMMEL-ETAMIC IPS100
Bore inspection sensor system
A 360° circular optics is advanced into the bore and generates an image of its ...
In Europe, partial discharge testing has been introduced for the safety standards pertaining to electronic equipment. The standard EN50178 requires that insulating components and elements meet the specified non-partial ...
The LQ-TMG 2 transmission sensor measures the light transmitted through a plastic sample. This is done by passing a laser beam with the wavelength of the welding laser ...
AUTOMATIC NON DESTRUCTIVE TESTING EQUIPMENT FOR SURFACE DEFECTS
N. D. CAMSHAFT INSPECTION - AUTOMATIC NON DESTRUCTIVE TESTING EQUIPMENT FOR SURFACE DEFECTSEnlarge the imageEnlarge the image
A) Problem Description
Camshafts for automobile engines are manufactured using a variety of methods.They can cause a variety of quality defects, such as:
...
The Case Tracker pressure/vacuum monitoring system is used to test the integrity of a wide variety of food and beverage products. This user friendly system is designed for non-contact, non-destructive, 100% automatic container inspection through a sealed cardboard and/or shrink wrapped case.
The primary function of the Case Tracker is to inspect containers in closed cardboard or shrink-wrapped ...
Minisonic ISD detects the changes of products in a pipeline by measuring the speed of sound. The speed of sound is a precise specification of the product ...
