Automatic dispensers (liquids, resins)

146 companies | 462 products
Filters
  • What’s new?
    Submit

The VERTIwrap model with four cups made of stainless steel is manufactured by Amtec, and...

VERTIwrap liquid dosing system measuring 1550×1160×1480 mm and weighing 480–600 kg is a heavy-duty dosing and packaging system with high-quality standard components. It is a cost-effective solution cheaper than many second-hand machines and...

{{productDetail[113341]}}

The DHVP Series of High-Viscosity Media Dispenser, manufactured by Parimix, is specifically...

{{productDetail[15721]}}

The Dosyfruit™ is a dispensing system, manufactured by PCM. It is ideal to use for injecting of fruit into...

The Hopper Dispensing System, manufactured by PCM, is a hopper station specifically designed...

The Liquid Additives Dispensing System, manufactured by PCM, is an additive station specifically designed...

The Limeskid is a dispensing system, manufactured by PCM. This is ideal to use for lime milk dosing applications. It offers full system involving pumps and...

{{productDetail[7926]}}

The new and innovative 2-K-precision-volume-dispenser eco-DUO600 made by ViscoTec
offers a wide range of applications for the 2-component dispensing. Through the
new integrated pressure sensors, a safety system...

eco-PEN 300 - the smallest, ergonomic unit with lowest dosing quantity of 0.001 ml up to X ml.

Description

The new and innovative precision volume dosimeter eco-PEN 300 made by ViscoTec offers a wide range of applications for low to high-viscosity dispensing.


Theory of function

preeflow® eco-PEN is a rotating and perfectly pressure-tight...

The eco-DUO45 model, assembled by Viscotec, is a metering pump that guarantees a clean and...

The creative 2-K-volume container by Viscotec has an extensive variety of uses for 2- segment apportioning and has a weight tight dislodging framework. It has a settling toward oneself rotor...

The newly developed ViscoTec's eco-PEN450 which is a precision-volume dosing element covers various applications low-medium range of viscosity dispensing.

The preeflow® eco-PEN rotates, it is absolutely pressure tight, and a system of positive displacement with a rotor-stator...

{{productDetail[21091]}}

Group DOSING SYSTEMS Solid Batch Dosing Systems Dosing of powder, granular and grainy materials are acknowledged by screw transport, weigh cinch feeder or vibration frameworks and are by...

The Fluid Batch Dosing Systems Liquid dosing frameworks for the most part incorporate the dosing of distinctive fluids for reactors as indicated by the remedy. Fluid materials are put away in tanks in the framework. Fluids are...

These micro dosing systems are based on prescription. They are convenient solutions for applications in which more than one material requires dosing in various amounts and transferred to other systems or a mixer. The systems...

{{productDetail[36981]}}

Mobile unit for dispensing viscous lubricants, with 25 l (6.6 US gallon) steel...

{{productDetail[39910]}}

The CVD 1 is a compact dispensing system developed by Sera. It is mainly built suitable for space-saving wall mounting.

The unit comes with easy operation,...

Standardised Compact Tank Dosing Unit for floor mounting (CTD) is an efficient and simple device that can be easily installed and maintained. The dosing unit...

Sera has manufactured the Preparation and Dosing Station, commonly used in preparing different chemicals with the process-technically required...

The Proportional Dispensing System, manufactured by Sera ProDos GmbH, is an equipment used to...

The KKV series is manufactured by Sera Web, and is a dosing system that is intended in collaboration with...

{{productDetail[111987]}}

The Sinad-Two is a dispensing robot that is manufactured by Sinergo. Due to the simultaneous R&D activity and broad experience, Sinergo has...

Thanks to continuous R&D activity and long experience, Sinergo has developed a new special equipment for dispensing and dosing fluids called SIAD1″.

Features:
high productivity
designed...

With several years of experience and after continuous research Sinergo has designed SIAD-2, a newly built equipment, for distribution and dosing of water.It has...

{{productDetail[28727]}}

The pressure dispensing unit with manual flow regulation perfect for both manual...

The VDH-PN is a volumetric dispensing unit. It is manufactured a leakage room. This is purposed to avoid any possible product leakage to flow...

The VDH-SR is volumetric dispensing unit manufactured by Adactech for automatic cycles.

The unit is equipped with a servo drive to...

{{productDetail[68724]}}

This device is suitable for doses from 40 to 1.000 cc and also a dose in the range of 100 to 5.000 cc. This dosing machine is easy to use...

The vertical volumetric fillers in this series of products are air-operated, being manufactured using food grade materials. In addition to the light and easy-to-move construction, these machines are also available in different...

{{productDetail[60499]}}

DOSASET are specially designed cyclohexanone dispenser. It is used for the consumption decreasing of cyclohexanone trough installed evaporation because the wet surface that is in contact with air is reduced.
It has a wide range of advantages. It eliminates the problems...

{{productDetail[16411]}}

Manufactured by TORO, solid state dispensing systems otherwise known as automatic...

The lime measurement plant permits...

{{productDetail[102939]}}

These Liquid loss in weight feeders give the most accurate gravimetric feeding for liquids as well as pastes in continuous or batch operations. The liquid loss in weight feeders system is considered the most accurate...

{{productDetail[30658]}}

The Ceradis model, manufactured by DOPAG Dosiertechnik und Pneumatik AG, is a single-component dispenser specifically...

Dopag's metadis Piston Metering Systems sport solid modular construction designs that allow a wide range of uses....

The Modis Series of Single-Component Dispenser, manufactured by DOPAG Dosiertechnik und Pneumatik AG,...

The Dosomed, manufactured by DOPAG Dosiertechnik und Pneumatik AG, is a single-component...

{{productDetail[14484]}}

The automatic volumetric apportioning of mono (Mini-NVD) and two-segment (Mini-NBD) fluid or thick items down to little volumes has simple setting of...

The MuliFlex® system is designed for volumetric multi-dispensing which has high precision. This device works very well in the packaging, food, pharma and medical industries where there is need...

The MultiFlow® multidispensing equipment is specifically designed and engineered to provide comprehensive and high performing solutions that meet the needs of multidispensing applications in the food, medical, packaging and pharmaceutical industries. The machines are used for...

The NBD Model, manufactured by MTA® - Unitechnologies SA, is a two-component volumetric dispenser. This equipment allows automatic volumetric...

The NVD one component numerical dispenser is a numerical volumetric dispenser for dispensing liquids or viscous products.
The setting of the dispensing parameters can be easily carried...

{{productDetail[13765]}}

The Liquid Dispensers, manufactured by GEA 2H Water Technologies GmbH,...

{{productDetail[122427]}}

The Star System® model is manufactured by Blue-White Industries, and is a chemical...

The Dispensing system Series Star III® is manufactured by BLUE-WHITE Industries....

The product is a perfect solution for unattended chemical control.It's very easy to read 8 digit display.It combines different mount options...

{{productDetail[9059]}}

The WIWA DUOMIX PU 280 design is specially used for the processing of PU foam, based on the experiences made with WIWA DUOMIX PU 460. Because of its compact design the PU 280 is very flexible for...

{{productDetail[82273]}}

Adjustable volume 0.5-5 ml
Resolution 0.1...

{{productDetail[133468]}}

Dosing through a volumetric cups system. Includes...

{{productDetail[26025]}}
Subscribe to our newsletter
Thank you for subscribing
There was a problem with your request
Invalid email address

Receive updates on this section every two weeks.

With DirectIndustry you can: Find a nearby distributor | Contact the manufacturer to get an estimate or a price Examine product characteristics and technical specifications | View PDF catalogs and other online documentation