|
|
Until 340mm and 690mm of wood, max. 0,85kW.
- Power
- Ergonomics
- Adapted to the industrial lifespans
Maintenance and ease of use
The pneumatic cut-off saws of the series PR 35-11X are adapted only to one manual use. The blade measures 350mm maximum. The saw is designed only for the wood cutting. The maximum size of cut cannot exceed 340mm (for the cutting on a side), and 690mm (for cutting speak two sides).
|
|
DCS3410TH
Chain Blade, Guide Bar Cover, Chain Cover, Wrenches
FEATURES
- Sealed tank system.
- Allows professional and safe working in combination with climbing harnesses and hydraulic lift platforms.
- Optimum Vibration damping.
- Fast acceleration and low emissions.
- Easy, uncomplicated starting.
|
|
24V 185mm(7-1/4") Cordless Circular Saw for USA, Canada, Australia and New Zealand
- Powerful and fan-cooled 24V DC motor
- Max. cutting depth
at 90° : 60mm(2-3/8")
at 45° : 47mm(1-27/32")
- Equipped with cast aluminum base and Spot Light
- Comfortable Soft Grip Handle
- Electric brake
- Externally accessible carbon bushes for easy replacement and long tool life
- 24V High Capacity Slide-in Battery pack: 2.0Ah Ni-Cd or 3.0Ah Ni-MH
|
|
BSS610
Fast Charger, Battery Cartridge, Carbide-Tipped Saw Blade, Guide Rule, Hex Wrench
FEATURES
- Built-in Blow-off Nozzle that directs sawdust away from cutting line
- LED Job Light that illuminates cutting line
- Cutting Depth indication
- Shows a measure for the cutting depth.
|
|
|
Floor Saw Blades from TYROLIT and Floor Sawing Machines from TYROLIT Hydrostress - an unbeatable combination.
|
|
Model: KS 66 C
• Powerful 1600 watt motor for heavy duty applications
• 56° bevel capacity with 45° positive stop
• Magnesium upper and lower guard offers lightweight high strength
• Full length kerf indicator for accurate cutting
• Externally accessible brushes for easy replacement
• Integrated dust blower keeps cut line clear for accuracy
• Soft-grip handle for comfort
|
|
Product features
Aluminium die-cast protective cover
Quick-action clamping lever for mitre adjustment
Chip extraction with integrated vacuum cleaner connection
Spindle lock to enable easy changing of saw blade
Safety lock on on/off switch
Additional handle for exact guiding of the circular saw
4 m rubber mains cable with patented quick-lock system
4 m and 6 m cables can be delivered as accessories
Scope of delivery
Carbide-tipped saw blade with 14 teeth, parallel guide, additional handle, hexagon socket wrench, professional carrying case
|
|
|
|
|
|
KSE 68 Plus
Metabo S-automatic torque limiting clutch: to limit any sudden reverse torque that can occur if tools jam or get caught.
Quick stop of saw blade on shutting off the machine by mechanical safety brake
Easy saw blade replacement with spindle lock
Sturdy aluminum die cast saw housing
Fully closed guide plate for secure support
Double guided parallel guide/ripping fence
Clearly visible cutting indicator for sawing after initial cut
Cutting indicator can be set precisely
Safety lock switch to prevent unintentional start of the machine
Angle adjustment of the sawing blade to the guide plate can be aligned for maximum cutting precision
4-point guide for angle-precise bevel cuts up to 45°
Lubrication system for long service life of the gear
Vario-Tacho-Constamatic (VTC) full-wave electronics for infinitely variable speed change. Speed automatically remains constant under load.
Thumbwheel for preselection of speed
Electronic soft start
Overload protection by electronic monitoring of coil temperature. LED for impending overload.
Optimum sawing dust ejection. No loading of machine with sawdust.
External extraction possible: a vacuum cleaner can be connected
Extraction nozzle rotatable and stoppable
Auto-stop carbon brushes to protect the motor
Precision guide rail available as accessory (order no. 6.31250)
|
|
165mm(6-1/2") Circular Saw for Europe
- Compact, 3.5Kg light weight and 1,100W Hitachi Powerful motor
- Unique design of Handle location and shape for easy operation
- Comfortable and nonskid soft-touch handle
- Noise level during no-load operation(86dB): 2 to 3 dB lower than the conventional models
- Precise and heavy-duty aluminum die-cast base and lower guard
- Adjustable steel guide plate for more accurate cutting operation
- Large knob for easy cutting depth adjustment
- Blower function to blow cut out cutting dust on the ink line
- Dust adapter for dust collector and two kinds of knobs (long type (factory-installed) and short type levers) as standard accessories: When the dust collector is not necessary, use the easier-to-operate long type lever for comfortable cutting operation
- Spindle lock for easy saw blade replacement
- Electric brake (Model C6BU2 only)
- PTFE coating base for smooth sliding of workpieces
(Model C6BU2 only)
|
|
9,000 – 34,000 RPM
0.3 – 1.7 hp (0.22 – 1.27 kW)
136 Series Band Saw
Variable Speed Control
Adjustable Handle
Lock-off Lever Start
|
|
The Lynx LCC30 Concrete Chain Saw is used for fast cutting of concrete, reinforced concrete, conduit, brick and other masonry. Plunge cutting and square corner cutting is not a problem.
The LCC31 Concrete Chain Saw is used for heavy duty cutting applications involving concrete, reinforced concrete, brick and other masonry products, and stone. Plunge cutting and square cutting are not a problem.
|
|
|
As market leader with wall saw systems (tool and machine) TYROLIT listens to the customers and translates the requirements and whishes in the tool and machine.
|
|
Jigsaw for heavy-duty sawing applications in wood and metal.
Variable, electronic stroke speed control for optimum cutting speed.
Especially suitable for sandwich materials and stainless steels.
Automatic coolant/lubricant feed with integrated tank.
Can be converted for beam turning with large foot plate.
Air-jet feature for unobstructed view of the cutting line.
|
|
Model: ST 800 XE
• Powerful 705 watt motor
• Large 110mm cutting depth
• Patented FIXTEC system for changing saw blades in seconds
• 4–Stage pendulum adjustment
• Variable speed electronics for control
• AVS anti-vibration mechanism for user comfort
• Ergonomic slimline bodygrip design with integrated soft-grip
• Dust extraction port
• Dust blower keeps cut line clear for accuracy
• Base plate can be moved backwards for cutting close to edges
|
|
420 ST E
Product features
-Blower device ensures unimpeded view of cutting site
-x-mal-click system enables tool-free replacement of saw blade
- Tool-free adjustment of saw plate for 22.5 and 45º mitres
- Plexiglas screen ensures unimpeded view of cutting site and improves suction power
-Vacuum cleaner connection
- 4 m rubber mains cable
|
|
|
|
|
|
Steel until 4mm/Wood until 50mm
Power
Multiple uses with the various saw blades
Adapted to the industrial lifespans
The jig-saws are adapted to the blades of the most varied teeth (additional to order separately), in particular for the industrial lifespans. The cutting speed is adjustable in a few seconds thanks to the adjustment of the exhaust silencers connected on the side. Two frequencies of blades make it possible moreover to adapt to various nanomaterials.
The first bearing unit (1850min-1) is used for the sawing of the following matters:
steel until 400N/mm 2, Al, Cu, ms, wood hard and tender, laminated, thermohardening, plastic reinforced with glass fiber, similar laminates, asbestos cement, and other nanomaterials.
The second bearing unit (1300min-1) is used for the sawing of the following matters:
stainless steel and thermoplastics.
A major part of the outgoing air is evacuated in a quiet way by the laterally connected handle, and thus moves away the unpleasant drafts from the scheme of work. In same time, a small part of this air is employed for cooling of the saw blade and to determine the outline of cut.
The screw with six sides making it possible to tighten and loosen the blade is constantly in the knob handle dévissable.
Of a great utility, certain accessories are available to few expenses: units of maintenance, special oil adapted to the pneumatic machines, balancers, and pneumatic hoses resisting oil.
|
|
110mm(4-5/16") Electronic Jig Saw
- Powerful 720W (120V:5.8A) motor
- Tool-less Blade changing system for easy replacement
- Electronic Speed Control Dial located on the best position for operation
- 4-stage Orbital operation for efficient cutting
- Top mounted LED light illuminates the workspace improving cut-line visibility
- Powerful dust blower pushes sawdust and chips away from the cutting path for a cleaner, more visible work surface
- Splinter guard for reducing splintering of cut surfaces
- Soft-touch grip for easier handling
- 2.2kg (4.9 lbs.)light weight
- Cutting stainless steel sheets(CJ110MV and CJ110MVA)
|
|
FEATURES
- 3 orbital settings + straight cutting
Optimum cutting action can be selected by simply turning the change lever.
- Ergonomically designed rubberized grip
Provides more control and comfort while minimizing hand fatigue and pain.
- Thick blade (1.7mm thickness) is available
In addition to the current 1.1mm thickness blade. 1.7mm thick blade performs well in straight cutting and curve cutting to thick workpiece.
Bosch's equivalent can be installed.
- Connectable to vacuum cleaner using hose
(Optional accessory)
- Low vibration
Counterweight balancing system reduces vibration.
Reducing vibration makes operator feel more comfortable when cutting various workpieces.
- Variable speed control by dial
Ensures optimum cutting speed per job.
- Rigid and rust- resistant aluminum bas
|
|
|
The new generation of the multipurpose system for interior outfitting and renovation is here: The new FEIN MULTIMASTER has developed from the unique experience that FEIN has acquired in over 40 years in oscillation Technology. With the oscillating movement and particularly user-friendly accessories, the FEIN MULTIMASTER is an unbeatably versatile, high-precision specialist tool – perfect for all professional outfitting, renovation and repair work.
|
|
In our program you will find five saws for four different applications:
Red Rooster jig saw RRI-8100
Suitable for wood working and light metals. Type RRI-8100 is executed with the SDS-Clic System. This saw is often used for coach-work building.
Red Rooster reciprocating saws RRJ-8205 and RRJ-8210
Especially suitable for coach work. Also for other materials like aluminium, plastics, wood, steel, etc. Both models are vibration reduced.
Red Rooster pipe saw RRI-8460
This saw can be used for pipe sawing up to a diameter of 530 mm The saw has noise reduction and is suitable for all standard available saw blades. Clamps are optional.
Red Rooster chain saw RRI-8550
The chain saw is for use on general timber cutting and is supplied with the Sandvik blade and chains.
|
|
PS 1
The easy alternative in plastic housing but just as strong as the other saws in the BIAX product family
PS 8
- Vibration-absorbed, preserves humans and the tool
- Adjustable stroke length for work in limited space dimensions, but also for different materials
PLF 90
The durable alternative in the metal housing.
|
|
RIGHT COMPOSITION SCIE-SABER
For work on not released sheet metal.
Cut out body ùême very deformed (round-off, setback, edge).
Exhaust by the back.
Many accessories (blades, saws, oiler, bent male wrench).
Many impacts/min: 5000.
Consumption of air (l/min): 230
Pressure of advised use (bar): 6,2
Tapped admission: 1/4 "
|
|
Model: US 1300 XE
• Powerful 1300 watt motor
• FIXTEC blade clamp for fast and easy blade change
• Variable speed switch for increased cutting control
and effi ciency
• Adjustable shoe for prolonged blade life
• Ergonomic soft-grip handle design for comfort
• Blades can be turned 180° for various applications
|
|
24V Cordless Saber Saw
- 24V Powerful Motor with cooling fan
- Variable Speed, and Trigger Switch with safety lock for cutting in a wide variety of materials
- Convenient for cutting materials on the floor or near window frames, and also for plunge cutting on plywood panels because the saw blade can be installed upside down
- Easy and quick blade-change by "turn and open-lock keyless-blade-clamp
- Replaceable carbon brush for longer motor life
- Soft grip handle
- 24V High Capacity Slide-in Battery pack: 2.0Ah Ni-Cd or 3.0Ah Ni-MH
|
|
Recipro Saw
JR3050T
Recipro Saw Blade Set
FEATURES
- High Cutting Speed
- The cutting speed is higher than our predecessor models in class.
- Tool-less Blade Change
- Push-in Lock System has made it possible to attach the blade quickly.
- Tool-less shoe Adjustment
- Push the red button for adjusting shoe position.
- Dust Proof Design No.1
- Air from inside prevent the dust collected around slider.
- Dust Proof Design No.2
- Ring and Rubber Seal protect gear room against dust.
- Soft Grip
- For excellent control with comfort
- Large Trigger Switch
- Features variable speed for accurate cutting
|
|
Engineered for sweeping curves or straight line cutting; Eastman round knife machines are designed to cut and perform with maximum efficiency.
The variety of power ranges available for the Cardinal Series round knives - from lightweight to super duty - allow for cutting a wide variety or materials such as silk, cotton, canvas, denim and coated fabrics. Eastman round knife machines are ideally suited for cutting large radius curves and straight lines. To match your cutting needs, the round knives are available with five different blade sizes, various horsepower ratings and custom engineered gear ratios. Eastman also offers high speed, carbon steel, grooved, and Teflon™ coated blades to maximize cutting throughput and increase productivity.
|
|
Model: MFE 1500
• Powerful 1500 watt motor
• Electronics with thermal overload protection and soft start
• Variable and adjustable cutting depth for accurate results
• Variable cutting width for versatility
• Bayonet adaptor for dust extraction
• Spindle lock
|
|
|
|
Portable saws
