|
|
- Light thermal mass heater: Comparing to conservative type brick furnace, there is lots of reduction in heat-up time, power consumption, and footprint.
- Stable gas generation: Tube type retort integrated in round heater can generate cracking gas stable.
- Safety feature: Excess temperature protection, over pressure, thermocouple burnt alarm, etc can maintain the system safe.
- Save footprint, easy operation: Operation switch install on front panel. Insulator got thinner and can realize less footprint.
|
|
Wellman Furnaces, Inc. offers a complete line of Exothermic Gas Generators for rich and lean operation. Standard sizes range from 750 SCFH to 30,000 SCFH. Refrigerated Gas Coolers can be provided to reduce the product gas dewpoint to the 40°F to 50°F range. Atmosphere Gas Analysis Panels are available to monitor the exo gas composition and control an optional trim valve in the burner fuel gas line to maintain the desired CO analysis.
Wellman Exothermic Gas and Steam Co-Generators will give you the process atmosphere gas you need and the added benefit of Free Steam. Major savings in both fuel and cooling water can be realized by combining your exothermic gas generator and steam boiler into a single unit. Paybacks range from six months to two years - Returning Your Initial Investment!
Exo Gas and Steam Co-Generators are available in sizes from 4,000 to 100,000 SCFH of exothermic gas, producing 390 to 9,780 lb/hr of steam.
|
|
Can-Eng Furnaces’ Atmosphere Generators are commonly used in conjunction with indirect gas fired or electric furnace systems.
Available in Exo, Endo and Dissociated Ammonia (DA) they prevent surface oxidation and decarburization in neutral hardening situations and as a carrier gas in carburizing and carbo-nitriding furnaces.
•Available in Exo, Endo and Dissociated Ammonia Atmospheres
•Provides a protective atmosphere for a wide variety of thermal processes
•Trouble free proven design
•Automatic burnout features
•Standard Endo 40% 40% 20%
•H2 N2 CO type atmosphere
•Exo Endo Dissociated Ammonia (DA)
•Ideal Length to diameter ratio to enhance reaction time
•Capable of rich or lean design in a wide range of air to fuel ratios
•Water-cooled heat exchanger
•Exo Gas Generator
•Designs available from 500 cfh to 75000cfh.
•Endo Gas Generator
•Standard Designs up to 12, 000 cfh
•Catalyst packed high alloy retorts
•Compact panel design
|
|
Over the last 30 years, Toromont has emerged as the
undisputed international leader in the design,
engineering and fabrication of modular CO2 plants.
We offer commercially viable solutions for a variety
of CO2 applications, from low pressure gathering to
water dehydration to high pressure (200 to 400 bar)
disposal, based on our modular approach to process
problems and our detailed understanding of the construction
of CO2 plants.
|
|
|
|
|
|
Nitrosource
autonomous 100%, with a reduced maintenance, the Nitrogen generators Parker replace the bottles of gas and the liquid supply of nitrogen.
Applications: inertage, network of nitrogen, packaging of food products...
Based on membrane technology, Nitrosource is the nitrogen generator of evolutionary design, enabling you to extend the capacity of the generator on site without repurchasing a complete generator. It thus follows the evolution of the growth of your factory. It produces nitrogen in full safety 24:00 /24H, until 4000 Nm3/h.
Nitrosource® enables you to easily produce nitrogen on site starting from compressed air.
Nitrosource® is composed of a central processing unit which can be wide in term of capacity by the addition of 5 pennies units. Thanks to the design Master/slave, up to 11 central processing units and theirs under units can be connected between them and managed like a single generator.
Nitrosource integrates a station of filtration of compressed air of high-quality. This characteristic optimizes laquality of compressed air in entry of the generator, ensuring a great longevity of the hollow fiber membranes. The generator is equipped with a digital system of data management to record and communicate the parameters of operation such as the pressure, the flow and the residual concentration out of oxygen.
The equipment is deprived of parts moving, ensuring an operation without concern, durable and
almost without maintenance. The generator is ready to function as soon as the compressed air is connected.
Nitrosource offers an unlimited quantity of nitrogen to you and can be easily connected to an external reservoir of storage. This will enable you to absorb the peaks of consumption in your applications where the demand for nitrogen is variable.
Ideal solution to replace the nitrogen bottles or the liquid nitrogen supply.
|
|
The PAC Chromatography application solution portfolio matches almost the entire spectrum of petroleum, petrochemical and natural gas analysis needs.
Beginning with the light end analysis of gas, naphtha and gasoline streams, PAC standard solutions progress up to and include the analysis of heavy streams such as crude oil and residual.
We also provide solutions for Environmental applications.
|
|
Distributed Energy Systems' StableFlow™ Hydrogen Control System is a breakthrough product allowing a power plant to actively control generator casing hydrogen purity, pressure and dew point.
StableFlow Hydrogen Control Systems integrate into your current hydrogen supply and automatically control pressure, purity and dew point. Actively controlling
hydrogen at optimum levels in your hydrogen cooled generator that will:
• Optimize Fuel Efficiency
• Maximize Generator Capacity
• Extend Generator Life
StableFlow Hydrogen Control Systems are designed for simple installation and do not require a generator outage.
|
|
|
WITT gas mixers are available as mechanical or electronic systems for different types of gases, capacity ranges and areas of application. The gas mixtures produced are either variable or pre-set. For local or remote monitoring and control extensive sensor technology and electronics are available. Gas mixers are also supplied with integrated analysers.
|
|
|
|
|
|
KOFLOC MFC-Gas Mixer (8500)
The KOFLOC MFC-Gas Mixer (8500) integrates 3 KOFLOC Gas Mass Flow Controller MODEL 8500 SERIES and a gas mixer in one convenient package. The result is a compact device that not only saves space and avoids clattering, but a unit with superior performance than a conventional system of separate mass flow controllers, a gas mixer and piping. The KOFLOC MFC-Gas Mixer (8500) is especially suited for burn control applications by greatly reducing flame flickering and stabilizing burn better than conventional setup.
FEATURES
- High-lift actuator for large flows
- Single 24 VDC power source
- Choice of RS232C or RS485 interface
- Standard totalizer function
- 14-bit converter for 4-1/2-digit display and operation
- Isolated thermal sensor for measuring inflammable gases
- Choice of SUS316L or SUS316 stainless steel
- Standard dimensions and fittings for easy replacement
- Free mounting position
- SV setting, plus 5 pattern settings
- Auto-zero function
- Wide selection of fittings, seals, wetted materials and communication interfaces
- Easy maintenance
APPLICATIONS
♦ Gas mixing
♦ Burn control
|
|
Gas Mixers
WITT gas mixers are available as mechanical or electronic systems for different types of gases, capacity ranges and areas of application. The gas mixtures produced are either variable or pre-set. For local or remote monitoring and control extensive sensor technology and electronics are available. Gas mixers are also supplied with integrated analysers. WITT are happy to design and build equipment to meet special requirements.
|
|
|
|
|
|
Helium, a scarce non-renewable gas, is used in the production of fiber-optic equipment and semiconductors. Other industrial uses of helium include optoelectronics, laser welding, cold gas spraying, chemical processing and leak detection.
Rising demand and declining reserves of Helium have led to dramatic increases in the helium price, intensifying the market for helium recovery systems. Helium recovery is used when the gas is required for, but not used up in an industrial process or system. In the production of optical fiber, the cooling rate and the quality of the product can be dramatically impacted if a less-than-effective helium recovery system is used.
With today's high helium prices, the XEBEC He-3200 makes compelling bottom line sense. This compact, economical system efficiently recovers high-purity helium from contaminated off-gas streams. Fully skid-mounted and configurable for a range of sizes and market applications, the He-3200 is easily installed in almost any setting, offering a quick payback and ongoing returns.
The XEBEC He-3200 is based on the company's H-3200 product platform, modified to remove impurities from Helium. The He-3200 combines patented rotary valve technology and conventional beaded adsorbents with an optimized PSA cycle to deliver higher
hydrogen recovery performance than conventional PSA systems. The XEBEC He-3200 requires only one-quarter of the space of conventional PSA and, with only two valves, is simpler to operate. The He-3200 provides a compact, economical solution for the recovery and recycling of helium in leak testing, metals deposition processes and fiber-optic and semiconductor manufacturing facilities.
|
|
Claind is one of the world’s biggest manufacturers of water electrolysis systems for hydrogen production.
Claind’s first product in this field was the HG2000 Series of hydrogen generators, designed initially for laboratory use, but later extended to applications in the field of renewable energy and other areas requiring low flow rates of high purity hydrogen. These machines incorporate a unique technology based on an extremely robust electrolytic cell with platinum-palladium electrodes, capable of generating ultra-pure hydrogen without auxiliary purification systems, thus guaranteeing far greater simplicity of design.
More recently Claind has also developed the HG MAX3 Series of industrial hydrogen generators. Here too Claind has used its own proprietary technology to develop an extremely reliable, top quality generator with an exceptional characteristic in the form of 15 bar delivery pressure.
|
|
There are three hydrogen generator models in the HG2000 Series, offering outputs of 200 to 600 Nml/min and gas purity ratings in excess of 99.9995%. Thanks to their compact dimensions, these units can easily be positioned near the analysers they feed.
These generators are equipped with a microprocessor control system, a liquid crystal display to inform the operator of generator status in real time, and a membrane keyboard for setting main gas delivery parameters. HG2000 Series hydrogen generators are also equipped with an effective alarm system to warn the operator of any system malfunctions.
|
|
|
|
|
|
BENEFITS AND SAVINGS
- H2 production only on demand
- Ultra compact design
- Improved productivity and chromatography results
- Improved safety in the lab
- Extended column life
- Increased efficiency in the laboratory
- No caustic solutions required
- Recommanded by the major analytical instruments company
APPLICATION
Eliminate the high pressure H2 gas cylinders of the laboratory by generating a continuous source of pure H2 gas for the following applications:
- GC-FID, NPD, TCD, ELCD, HALL
- GC-Carrier gas
- THA
OPERATING MODE
These generators use the newest membrane technology for the electrolytic production of pure H2 gas. This technology was preferred over alternative hydrogen generating techniques because it is clean, requires less maintenance and there is no need to store chemicals to maintain operation. Hydrogen is produced by electrolysis of water through a polymer membrane. Only pure water, either distilled or deionised, is required to provide trouble free long term operation. A dessican t cartridge purifies the hydrogen.
Safety features :
The small contained volume(< 50 ml )makes the generator safe for operation in spaces where cylinder hydrogen is restricted. An auto shutt off procedure places the unit in standby in the event of an internal error, and selectable alarms allow the user to be informed whenever operating conditions vary from the set point.
|
|
|
The FuelGen(TM)hydrogen fuel generator system is the latest offering from Proton Energy Systems for vehicle fueling. The FuelGen system includes all of the components of Proton's commercial HOGEN H6M electrolyzer, housed in an outdoor rated enclosure. Enhanced system controls include an energy conservation mode for both the generator and chiller well suited to the intermittent hydrogen demand of the fueling scenario. The integrated DI water system, hydrogen quality monitoring, internal temperature control, and self contained automatic safety system make the FuelGen a turnkey, integrated electrolyzer package for high purity hydrogen fuel generation.
|
|
Proton Exchange Membrane Compact
Hydrogen Generators
- High purity (99.999+ %)
- Process pressure
- Minimizes hydrogen inventory
- No caustic electrolytes, asbestos free
- Reliable, compact, automatic control
Production rates: .5 - 1 Nm3/h (19 to 38 scf/h)
Distributed Energy Systems makes Proton Exchange Membrane (PEM) hydrogen generators the new standard for on-site hydrogen production. Related PEM products are already recognized as the technology of choice for automotive fuel cells. HOGEN® hydrogen generators are available for broad commercial use.
|
|
* Pure hydrogen production from 0,5 to 10 Nm3/h
* Adjustable pressure from 1 to 10 bars
* System control fully electronic
All the hydrogen generators series « BP MP » are skid mounted ; the control system is fully electronic and the cooling is through natural air.
|
|
* 500l/h of pure hydrogen at 8 bars without compressor
* System control fully electronic
* Unattended operation 100% static
Completely autonomous and 100% automatic, this equipment with a recognized reliability is perfectly studied to the enclosed sites particularities taking account their geographic locations, the difficulty linked to the electrical power supply and the communications means.
|
|
TELEDYNE ENERGY SYSTEMS, INC. manufactures hydrogen generation systems designed for on-site, automatically controlled, ultra-pure hydrogen product gas generation. Delivery flows range from 1.1 nm3/hr (20 SLM) up to 56 nm3/hr (1,000 SLM) with 99.9998% purity. The generators also produce oxygen as a byproduct of the water electrolysis process.
The hydrogen generators are fully assembled, skid mounted and operationally tested prior to shipment to facilitate ease of installation and commissioning. System design can also be provided to include compression and storage solutions specific to your application.
TELEDYNE ENERGY SYSTEMS, INC. hydrogen generators are currently used in power plant, chemical plant, semiconductor, argon purification, metals processing, float glass, fiber optic, research laboratory, fuel cell testing, and hydrogen fueling applications throughout the world.
|
|
|
Hydrogen offers tremendous advantages as a clean fuel source. Hydrogen, like electricity, is a clean energy carrier and when derived from renewable energy sources, hydrogen has the potential to provide an inexhaustible supply of energy without generating pollution or greenhouse gases of any kind. It can also be economical and have a relatively high margin of safety when properly produced, stored and dispensed.
|
|
Pollution-free - full automatic clean generation-of-gas equipment.
Prolonged continuation operation is possible - Maintenance-free
Generation-of-gas equipment of the in-situ type which supplies the clean hydrogen gas which impurities do not mix by adoption of ion exchange membrane type water electrolysis.
application :
- For hydrogen addition of various chemical reactions
High purity gas for various burning.
- A marking pretreatment of IC and electronic products
- Metalworking, such as a false tooth and a jewelry craft
- Plastic melting processing
Fuel cell, other fuel
For functional water (hydrogen water) manufacture
|
|
|
Andritz VA TECH HYDRO has been producing generators and other electrical equipment since 1892. Well known under the repudated brand name "ELIN", VA TECH HYDRO generators are in operation all over the world. Generators with a capacity of more than 40,000 MVA are in service. Our own welding and machining facilities secure high quality and short delivery time.
|
|
|
|
|
|
As Gas Chromatograph users will probably confirm, little has changed in the past decades in the way hydrogen gas is used in the laboratory. Now that picture is set to change, thanks to a remarkable multi-disciplinary gas generator manufactured by Parker Balston. Their new paradigm solution for generating hydrogen in laboratories is so easy to use that it could potentially save thousands of Euros a year in expensive downtime and installation costs.
Four different models have been upgraded to the 100, 165, 260 and 510 ml/min units producing high purity hydrogen, 99.9999% at up to 6.89 bar. Special features include an advanced PEM electrochemical cell protection system with microprocessor controls, a unique water hydration circulation purification system. This is also complimented by USB capability with software options for remote monitoring and control, blue intensity back lighted display for simple operator use with touch screen visuals for system status checks, Automatic water fill options, and data logging performance controls for preventative maintenance with reporting tools for use in regulated environments where system validations are required.
These generators will allow GC (Gas Chromatograph) users to supply, control, and automate all hydrogen gas supplies. A single generator can support up to as many as 13 instruments with high purity hydrogen.
Other applications include fuel gases for total hydrocarbon analyzers, supply gases for hydrogenation reactors, hydrogen for pilot scale fuel cells assays and hydrogen for collision reaction gases.
Each generator is available as standard with a two-year warranty emphasizing the quality and reliability
Parker Balston is the worldwide leader in separation and filtration technologies, and offers a broad range of analytical gas generators to meet your specific analytical instrument requirements. All products are backed by a fully staffed field sales and service organization.
|
|
# Chemical process with very easy use
# 3 m3 of hydrogen gas produce in less than 10 minutes
# Especially adapted to isolated regions
# Gas reserve possible
Easy to handle, this generator does not require any maintenance other than its cleaning after each hydrogen production operation.
|
|
|
|
|
|
Hydrogen Coolant Purifiers - HCP
The HCP is a self-contained system that dries and purifies the hydrogen gas that is used as a coolant in electrical power plant generators. It removes water, oil and other contaminants that cause corrosion and cracking in retaining and zone rings, lead carbonate formation, increased windage losses and other potentially catastrophic consequences.
Legendary Select Series or Century Series control valves feature stainless steel internal parts designed specifically for desiccant dryer service and tested to 500,000 cycles, bubble-tight.
Switching valves and gas-tight blower are vented to prevent formation of dangerous air-hydrogen mixtures.
Welded stainless steel piping minimizes threaded connections, reducing potential leaks.
Complete instrumentation monitors the system for operation outside of specifications.
Potted conduit seals isolate electrical controls from hydrogen.
High temperature heater shutdown prevents excessive operating temperature.
Pre-installed PPC Series pleated particulate filters protect downstream equipment.
|
|
|
|
|
|
General description
LAB PURITY KIT The Lab Purity Kit (KT-1000-0034) provides users of HOGEN® GC and S Series hydrogen generators the means to assure high hydrogen quality (dewpoint) and an uninterrupted supply for their critical process.
The Lab Purity Kit is a panel-mounted assembly comprised of a user connection manifold, pressure reducing regulator, gas-monitoring dewpoint sensor, backup desiccant bed column, gas filter, controls, alarm relay, and a three-way gas diverter valve.
How it Works:
The lab purity kit is installed upstream of the user's process. If the dewpoint monitor senses moisture in the hydrogen in excess of the control set point, a three-way valve diverts the gas to the user's hydrogen vent system. As an extra measure, a desiccant column captures any trace moisture before it reaches the end user. If desired, the user may connect a backup hydrogen supply to a port provided on the kit. This provides uninterrupted hydrogen flow in the event of any hydrogen generator purity or operational upset.
|
|
The most compact, economical and reliable PSA systems available today, Xebec's H2X solutions efficiently upgrade hydrogen-containing reformate, petrochemical process gas streams, and refinery off-gas streams to pure and ultra-pure hydrogen. H2X solutions have minimal pressure drop, remarkable uptime performance, and simple installation and operation. While occupying a fraction of the footprint of conventional systems, our PSA systems have earned a reputation for easy, flexible installation and problem-free, economical performance.
DESIGNED WITH LEADING HYDROGEN PURIFICATION EFFICIENCY
Fully skid mounted and factory loaded with adsorbents, these PSA systems are available in a range of sizes and market applications, and has proven itself in quality and the lowest of ownership at numerous installations in Asia, North America, and Europe.
|
|
Claind’s nitrogen generators satisfy all laboratory analysis and industrial process needs with very few exceptions.
The range includes compact generators with built-in oil-free compressors, medium and high pressure generators for industrial applications, and special generators for OEM applications.
Claind’s nitrogen generators are based on PSA (Pressure Swing Adsorption) technology for maximum reliability and gas quality. Claind has also patented the Fast Purity system, the most significant innovation in the world of PSA technology in recent years.
|
|
Nitroflow BASIC
autonomous 100%, with a reduced maintenance, Generators Parker the nitrogen replace the gas bottles and the liquid nitrogen supply.
Applications: inertage, network of nitrogen, packaging of foodstuffs...
Based on membrane technology, Nitroflow BASIC is the nitrogen generator with the most compact, esthetic integrated compressor and silencer of the market (<55 dBa). it produces nitrogen in any safety 24:00 /24H, until 1,5 Nm3/h.
It integrates a piloting by microprocessor, a control and adjustment of the parameters of work on touch screen and an analyzer of O2 to visualize the nitrogen purity. The strong point of the system: the compressors have one lifespan longer than those of our competitors (patented exclusive system). 2 years or 8000 operating hours exclusive guarantee.
Ideal solution to replace a nitrogen bottle/day.
|
|
|
The combination of these technologies produces a continuous on-demand supply of pure nitrogen. Typical applications include nebulizer gases, curtain gases, source gases, chemical and solvent evaporation, instrument purge and supply, evaporative light scattering detector use and sparging.
|
|
|
|
Technical gas production equipment
