|
|
3M Nomad Basic Entry Mats
The right mats for your entranceway are rarely top of mind when you're managing a busy restaurant, café, bar, shop or office. But it's where you can make a good first impression and even save on cleaning and maintenance costs.
In contrast, buying 3M Nomad Basic Entry Mats gives you the reassurance of owning brand-new, fit-for-purpose, durable matting that can last for months*.
Easy to install, handle and discard, 3M Nomad Basic Entry Mats are discreet, hassle-free and cost-efficient.
|
|
DENSORB Sorbents
High-performance absorption materials for containing and effectively absorbing leaking liquids.
Avoid unnecessary costs and effort!
Larger accidents are not always the most dangerous.
Small leakages can also endanger the environment and compromise safety in the workplace thus posing a hazard to the workforce. Avoid high costs for clearing debris, cleaning up and waste disposal, protect
yourself with DENSORB binding materials.
Spill kits in many different sizes suitable for all emergency situations imaginable and
wide range of absorbent rolls, mats, cushions, snakes, barrel cover, oil barriers, granules and practical accessories.
|
|
|
Surround and absorb spills of acids, bases and unknown liquids. PIG® HAZ-MAT Socks are specially treated to absorb high concentrations of acids, bases or unknown liquids better than any other absorbent in the market.
|
|
General Purpose Socks
- A pack of 10 strong and highly absorbent socks
- Flexible structure ensures product fits easily around machinery and uneven surfaces
- Ideal for containing a variety of spills - hazardous, water based, cutting fluid etc.
- Sock Dimensions: 76mm diameter × 1200mm
- Typical Absorbency per Sock: 5 litres
|
|
The BALEAR boom channel goes astray, stops and retains oil pollutions even by hydrocarbons.
They are made by elastomer or plastomer material according to the applications and are reinforced by a high resistance textile frame.
Consequently, the BALEAR anti-pollution boom is a necessary equipment during oil pollution events.
The BALEAR anti-pollution booms are present in different application areas ; calm port or open sea, and are permanent or for interventions.
Advantages :
-excellent behaviour to swell and wind
-rapid setting up in water : 1 from 2m/s
-total reliability : keep 75% buoyancy, even if all cells should be pierced
-resistant to traction and atmospheric agents (UV, hygrometry, bad weather¡K)
Diversified range:
- custom made
- 5 different models
|
|
for industries , transport , airports, railway, fire stations, harbours, highways,waste collection companies.
The emergency response kits are prepared in order to meet the widest depollution needs, for spills up to 1200 lt. As commonly known the latest EC and national directives referring to workplace safety and accident prevention, foresee that emergency kits are displaced to contain and absorb possible spills of hazardous liquids.
The kits are available with following configurations:
OIL ONLY: to absorb oil products, even in water.
UNIVERSAL BASIC: to absorb water, hydrocarbons, organic and inorganic liquids, chemicals, solvents, antifreeze liquids, acids and bases.
CHEM: to absorb aggressive chemicals, caustic and toxic liquids.
|
|
HIGH VISIBILITY COVERS FOR MHEOLES
THE ONLY FULL SATURATION OIL BINDER POWDER
The manhole security cover is used to prevent seepages
- Easy to use in case of emergency; it must be just laid down on the manhole
- Made of valuable polymers, hard-wearing and flexible, it adheres perfectly to grounds which are uneven, nubby and cracked.
- Resistant to water, hydrocarbons and to the most aggressive chemicals.
- The cover is practically eternal: after the use it must be only washed before it is ready to be used again.
- Available in 6 different sizes
|
|
Anti-pollution stopper
Pronal anti-pollution stoppers have been designed to remain permanently fitted in water and sewer pipes so as to quickly stop the pipeline when accidental contamination occurs.
To do this, simply trigger stopper inflation using a remote-operated system.
Once inflated, it will prevent any toxic fluid spill or spreading of firefighting water in the pipeline.
|
|
High resistance floating barrier, with a total height of 45 cm, projected to have a long durability and to be reliable, requiring only a little maintenance and offering on the other hand years o use. Perfect in case of frequent use and vulnerability to degrade caused by both atmospheric agents and abrasion. It is the perfect floating barrier for protected and calm water with weak currents and it is recommended for petrol plants, industries and governmental organizations of environmental emergency operations.
CHARACTERISTICS:
*Clamp to hold the fabric with an high resistance.
*Rings to enable both the anchorage and the transport
*Double layer fabric to assure a longer durability
*Handles to make the positioning in water and the gathering easier
JR 1205 : *total height 45 cm x 30 mt of longitudinal section
*Chain of 6 mm.
* ASTM connectors (15 cm out of water and 30 cm under water)
|
|
A citrus based solvent . It has a pleasant smell and
dries quickly without leaving residues, it is not toxic
and harmful. Flash Point ‘42 ° C. A highly efficient citrus based solvent
degreaser for the removal of heavy oil, wax, grease, asphaltines and bitumen emulsion. LEM SOLV’ is in agreement with the Montreal Protocol for
the reduction of ozone chemical depletion.
APPLICATIONS:
Use either as a contact, dip,immersion or spray on degreaser.
Apply undiluted to the oil contaminated area allow a contact time of 10-
15 minutes before rising with water.
|
|
3M Sorbents can be used in a wide variety of applications ranging from simple maintenance to emergency spill clean-up. Sorbents help ensure your workplace is kept clean and safe and reduce damage to the environment.
3M sorbents are designed to be used for specific jobs and materials. Some can be used for general maintenance applications while others are designed to handle petroleum or chemical spills and clean-up.
|
|
General Purpose Wipes
- A pack of 50 strong and highly absorbent non-woven individual wipes
- Ideal for leaks, small spills and catching drips from machinery
- Suitable for wiping and cleaning equipment and machinery
- Wipe Dimensions: 510mm × 410mm
- Typical Absorbency per Wipe: 1.14 litres
|
|
|
3M Chemical Sorbents are made from inert, synthetic fibres principally of polypropylene. They are available in a wide range of formats and are lightweight and dust free. They have a high absorption capacity which minimises the amount of waste for disposal.
|
|
|
|
|
|
Bi-On S
The new filtering media Bi-On S is the alternative to activated carbon (AC), normally used in solvent recycling systems.
Bi-On S is specially effective in facilities dedicated to the recuperation of solvents such as ethyl acetate and ethanol. These solvents are commonly used in graphic and printing industry (tampography, flexography, etc).
Its main advantages are:
- Activated Carbon (AC) catalyses the oxidation of Volatile Organic Compounds listed as peroxides. Those start in turn a chain reaction which causes an increase in the bed temperature, which sometimes can be above the ignition temperature of AC. In these circumstances there can be a fire in the filtering bed.
- Auto-ignition is problematic as it usually
- Occurs unexpectedly,
-May damage falilities.
-May set free toxic substances which pose a considerable threat to people and the environment.
- Natural zeolytes which compose the filtering media Bi-On S do not have self-ignition point, whereas AC has a value of 420-450 ºC approximately.
- Bi-On S eliminates the fire hazard which present the facilities dedicated to the recovery of solvents such as ethyl acetate and ethanol.
- Bi-On S does not generate the annoying and dirty dust generated by activated carbon (AC). Unlike CA, Bi-On S pellet makes handling easy during the filling of filtering towers in the solvent recuperation units.
|
|
|
|
|
|
FIRE SORB
FIRE-RESISTANT INDUSTRIAL ABSORBENT FOR FLUIDS AND GREASES
* Fire-resistant absorbent made of red spruce granulates treated at + di 600¡C
* Granulometry from 910 to 250 micron. Density 0,170 +- 0,03
* Absorbs 750% its own weight and from 48 to 80% its volume
* Doesn't spread fire. Fire-proof via water : 7%
* Will not turn to mud
* Chemically neutral
* Screened and de-dusted
* Not toxic . Biodegradable. 100% vegetable
* Absorbs any kind of fluids, oil, water, solvents, inks, weak acids and bases, chemicals, greases as well as mixtures and other filth incidentally spread on land.
* Disposal by incineration or landfill collection according local regulations and according the absorbed product.
* Fire classification : M1 (CNPP approved). Approved by CEDRE.
* Made of lignin and cellulose. Contains no clay nor silicone.
* Antislip.
* Recommanded to be used on national roads and motorways : N¡ ABS.2001.10.
* Complies with NF P 98-190 regulation dated february 2002.
* Recommanded to be used by Military Forces (S.E.A.). ADSORBENCY UP TO 750% ITS OWN WEIGHT.
APPLICATIONS:
* In mechanical and precision workshops, car industry, aviation, garages, filling stations, transit areas, roads and motorways, petrochemical industries, etc.
* Absorbs any hazardous fluid on the ground, antislip property, floor cleanup.
* Will not turn to mud when in touch with water and oil.
* High safety use on floors thanks to its antislip properties.
|
|
|
|
|
|
SAAFOxidant gas removal chemical media is designed to efficiently remove 99.5% of specific gaseous contaminants from the airstream. Target contaminants include sulfur dioxide, hydrogen sulfide, nitric oxide, formaldehyde, and lower molecular weight aldehydes and organic acids.
SAAFOxidant engineered media is composed of a combination of activated alumina and other binders. Potassium permanganate, an oxidizing agent, is applied to the media uniformly during pellet formation and is distributed throughout the pellet volume to promote optimal performance.
The SAAFOxidant chemisorptive process removes contaminant gases by adsorption, absorption and chemical reaction. In this process the gas is trapped and oxidized within the pellet, changing the gases into harmless solids while eliminating desorption. SAAFOxidant's engineering allows this to be an instantaneous, irreversible, and safe chemical reaction.
SAAFOxidant media is effective in commercial and industrial systems, withstanding velocities up to 500 FPM. The media operates at -4°F to 125°F (-20°C to 51°C) under 10- 95% relative humidity (RH).
|
|
|
|
|
|
The HCS products act on the hydrocarbon surface tension to break the molecular chain of hydrogen and carbon.
Once separated the elements are encapsulated in a water bolster of water and oxygen and then made "bio".
HOW OPERATE A DISPERSANT SUBSTANCE
Means that in a few minutes we can dispersant the hydrocarbon available in the water, soul, exetera..
The hydrocarbon is on the water surface
Dispersant substance application
Mechanical agitation
Hydrocarbon dispersant and distribution
WITH WHAT SUBSTANCES IS ACTIVE
The neutralizing solution for hydrocarbon HCS, if properly applicated, can mitigate the environmental impact by promoting the subsequent degradation of:
• Petroleum distillates
• Gasolio
• Disel
• Kerosene.
• JP4 aviation fuel
• Hydraulic Oils
• Lubricating Oils
• Ditermics oils
• Aromatics Solvents (Toluolo, Xilolo, Stirolo)
• Aliphatics Solvents (Eptano, Esano, Ragie minerali)
• Alcohols
• Diphenyl
• Glicols
• (Acetone, Metil Etil Ketone).
PRINCIPAL USERS
• Ecological first aid
• Transport nd special waste treatment.
• oil platforms and refineries.
• Petrol deposits
• Sewage treatment plants
• cleaning and remediation industry.
• regional,provincial, municipal institutions
• chemical and petrochemical plants.
• purification plants.
• highways Societies
• rail Companies.
• Fuel Distributors
• Fuel deposits of.
• Airports and ports.
• Ships and boats.
|
|
PRONAL inflatable stoppers are used:
- to test pipes for leaks under pressure
- to isolate pipes during maintenance operations
- to make temporary seals to avoid run off of toxic products.
Thanks to the materials employed and the suitability of their design, PRONAL inflatable stoppers are ideal for all types of pipes.
Advantages:
- simplicity and speed of installation,
- completely leakproof,
- safe to use,
- suitable for a wide variety of pipes : concrete, cast iron, steel, stainless steel, PVC,
- sturdy and long service life.
A highly diversified range of products :
- one of the widest range of products on the market,
- from standard to made-to-measure : models for low pressure and high pressure environments (over 100 bar depending on requirements)
- a choice of shapes : cylindrical, ovoid, square...
- no size limits : up to 3,000 mm in diameter,
- specific models which comply with particular specifications.
|
|
|
|
|
|
Pipestoppers™ Inflatable stoppers
INFLATABLE STOPPERS
These versatile inflatable air bags and stoppers are used to accommodate a wide variety of industrial applications, most commonly used for:
Plumbing operations
Ideal for creating an air-tight seal in drainage applications
Low pressure hydrostatic tests
On-site thermoforming of bends in ducting and conduit materials
Fibre-optic construction projects
Concrete Pipe Joint Testing
Debris and Animal Stopping
Weld purging to isolate large volumes in tanks, so minimum volumes are left for argon/nitrogen purging
Features:
Inflatable air bags up to 2,000 mm (80") diameter
Manufactured using a high quality latex inner tube and polyurethane impregnated nylon fabric outer cover
Installed with a length of flexible inflation hose with sealing tap/valve.
Styles:
Cylindrical bags which do not 'turn over' in the pipe.
Spherical bags which are ideal to insert through a small hole + seal a large diameter pipe.
Rectangular stoppers for ducting.
All sorts of special shapes and sizes have been taken on as specials!
|
|
Float-in Bags are fitted with a reinforced front cover and tension lugs. The CR material ensures increased resistance to chemicals. Working lines are secured to the tension lugs using carbine hooks and the pipe sealing bag can be floated into the pipeline without any difficulty.
Only four sizes are needed in order to seal pipe dimensions ranging from 70 mm to 1200 mm (2.8 inch to 47 inch). The float-in bag program is rounded off by a chemical variation in addition to the basic design.
In this case, all metal parts on the float-in bag are made of stainless steel and the integrated inflation hose (10 m/32 ft.) guarantees the corresponding safety distance to the area of danger.
|
|
Inflatable stoppers
Plugging - Stopping - Tightening - Protecting
Muststop stoppers is a wide range of stoppers designed for various applications on 30 mm to 3000 mm Diameter pipes. They can be equipped with a by-pass allowing a flow deviation or a water or air tightness test.
Muststop fits to any pipe shape (circular, rectangular, ovoid…) or nature (PVC , iron, sandstone, concrete, wood…) and resists to most of the aggressive fluids commonly used in industries.
Muststop stoppers can be made of aramid fiber (Kevlar…) and are coated with Neoprene or Nitrile rubber.
|
|
|
|
|
|
Designed specifically to test Concrete Pipe Joints to European Standards, the ATO Stoppers represent a portable, low cost method of testing.
Pipestoppers™ ATO Stoppers and test plugs are available in all sizes from 300mm - 1800mm. Each ATO is manufactured to the specific pipe size with a variation of + & - 6mm.
The stoppers comprise an inflatable outer ring with a 5mm thick closed cell neoprene rubber out, bonded on for excellent sealing properties.
Each stopper can be used as a test end or a blank end and they are totally collapsible and light in weight, making them easy to handle.
Each stopper has a soft central membrane, with a Schrader valve for inflation. They are also fitted with a preset and tamper proof relief valve.
A pull tag is fitted for deflation and there are no removable parts.
A hook and loop strap is provided to attach a gauge and a pull out strap is provided too. An on/off tap can be opened to vent the air.
ATO stoppers are manufactured and tested to BSEN 1610 - 1998.
The safe working pressure is 0.2 bar (2.8 psi, 200 mbar or 20 kpa)
Inflation can be carried out with a small, low cost hand pump or a rechargeable inflator.
A moulded connector for the inflation hose is provided.
Patent Number 8361283
|
|
For non-flammable petroleum spills, use PIG® Oil-Only Rolls.
Sometimes you simply need a mat to last longer and absorb more. With a super-thick bottom and super-tough top, FAT MAT™ Rolls are perfect for hard-to-reach areas, wet walkways, big cleanups or any other job requiring long life and high capacity!
|
|
|
Absorb leaks and spills to keep floors dry and workers safe. Strong, durable PIG® Mat lasts longer so you use less Mat and spend less time replacing it.
|
|
|
The PIG® Curb Style Drain Insert is designed for use as a Best Management Practice as part of a stormwater pollution prevention plan to help prevent hydrocarbons and sediments from entering the water system. Normally lasts 3-6 months but should be inspected regularly.
|
|
|
3M™ Oil Sorbents are an innovative range of highly absorbent, quality products. Being hydrophobic, (repels water) they are ideal for absorbing oil from areas where water may also be present – exterior locations for example. 3M Oil Sorbents will not disintegrate or sink, even when saturated with oil, and are very easy to dispose of.
|
|
Portable SPILLBLOCKER® Dikes
In the event of a solid or liquid spill, our SPILLBLOCKER® Dikes are valuable pieces of spill response equipment. The polyurethane material is washable and reusable. These spill control dikes have a two-layer construction: the top layer is harder for durability and the bottom layer is soft and tacky to stick to smooth surfaces. Find more spill berms and water barriers at New Pig. In the world of industrial supplies, we're the leader in leak and spill solutions.
|
|
The products of the CHEM line are used in case of accidental leaks of acid products, toxic liquids, and of gas dissolved in water or generally hazardous.
They considerably contain the evaporation of the products to be dealt and they have a high adsorbency power (absorb up to 16 times their own weight). They are among the few products all around the world which can absorb hydrofluoric acid. In specific cases they can kill some absorbed products.
Ideal sorbents in presence of strong chemical aggressiveness. Added with surfactants to considerably reduce the vapours escape.
|
|
|
|
|
|
BIOLOGICAL CLEANING
LAND AND WATER DEPOLLUTION
CHEMICAL CLEANERS
HIDRO CARBON SOLVENT
The HCS products act on the hydrocarbon surface tension to break the molecular chain of hydrogen and carbon.
Once separated the elements are encapsulated in a water bolster of water and oxygen and then made "bio".
HOW OPERATE A DISPERSANT SUBSTANCE
Means that in a few minutes we can dispersant the hydrocarbon available in the water, soul, exetera.
WITH WHAT SUBSTANCES IS ACTIVE
The neutralizing solution for hydrocarbon HCS, if properly applicated, can mitigate the environmental impact by promoting the subsequent degradation of:
- Petroleum distillates
- Gasolio.
- Disel
- Kerosene.
- JP4 aviation fuel
- Hydraulic Oils
- Lubricating Oils
- Ditermics oils
- Aromatics Solvents (Toluolo, Xilolo, Stirolo).
- aliphatics Solvents (Eptano, Esano, Ragie minerali).
- Alcohols
- Diphenyl
- Glicols
- (Acetone, Metil Etil Ketone).
- Concentrated fast-acting
- Water based
- Not flammable
- 100% biodegradable
PRINCIPAL USERS
- Ecological first aid
- Transport nd special waste treatment.
- oil platforms and refineries.
- Petrol deposits
- Sewage treatment plants
- cleaning and remediation industry.
- regional,provincial, municipal institutions
- chemical and petrochemical plants.
- purification plants.
- highways Societies
- rail Companies.
- Fuel Distributors
- Fuel deposits of.
- Airports and ports.
- Ships and boats.
|
|
Absorbents of the OIL ONLY series are made of PP fibre.
They join high absorbency (up to 20 times their own weight) to a significant cost saving. User-friendly and reusable, they fit any spill of oil, hydrocarbons, paints and solvents both on land and water.
|
|
|
|
Environmental protection
