|
|
|
ASi fieldbussystem suitably for small, distributes clusters of PLC combination PLC, entrance/output interface and distribution block integrated by actuators and sensors field bus ii-system modular system for up to 64 Stationenn
|
|
... a step ahead of the solenoid valve.
Use Piezo-technology characteristics for your applications.
HOERBIGER progressive technology of Piezo valves is used successfully and approved since many years:
- Control high flow rates and pressure with minimum electrical output
- The compact shape , the low weight and absence of self-heating allow simple integration
- Short switching times and high dynamics improve the cycle times and productivity of your application
These features characterise the technology of the Piezo switching valves:
- Minimum power input
- Short switching times
- Long life span.
|
|
|
EExPress™ is a new concept of 5/2 valve manifold to control pneumatic actuators in dangerous environments like chemical, petrochemical applications. The concept consists in an patented "integrated protection", a unique feature on the market today, which permits to install the manifold directly close to the actuators without being mounted in expensive explosion-proof pressurised cabinets.
|
|
This range of valves includes operating devices suitable for most applications according to the space available. They are offered in a range of different dimensions: from M5 to G1/4 and in versions: 3/2, 5/2, 5/3 center open and 5/3 center closed.
|
|
- Position sensing of the hand lever position. Sensor assisted option for monitoring by a higher-level control system.
- Lockable hand lever. Reliable servicing and maintenance even during operation.
- Selectable connection direction and mounting options. Output connections downward or to the side.
- Robust construction with an excellent design. Plastic lever with metal or plastic housing permits operation in harsh environments.
- Can be used as a pneumatic master switch or a 3/2-way valve.
Pneumatic connection: M5, G1/8, G1/4 or G1/2
Nominal size: 4/6/8/12 mm
Temperature range: -20 ... +80 °C
|
|
|
Many applications require hand and foot actuation. The OMNI 375 3-Ways and 4-Ways offer a rugged, compact, versatile answer. Mount them in any position.
|
|
This type of valves is offered with ports from M5 to G1/4 in different versions including 3/2 NC, 3/2 NO and 5/2 and with a variety of operators to meet a wide range of uses. The valves are available both with brass gate and with spool to satisfy most applications.
|
|
The Diaphragm Amplifiers are miniature interface devices which perform the same function as a piloted three-way valve, but at low outlet flow rates. Pneumatic signals of several inches water gauge applied to the input will control the output pressure up to 35 PSI in both digital and analog systems.
Diaphragm Amplifiers are very suitable for providing pneumatic signals to air-piloted valves for powering small cylinders. They are also used at fluidic signal levels for providing isolation and in timing circuits.
|
|
6 mm-slim diaphragm-isolated solenoid valve
KV Series
6mm Slim Design
This small valve enables you to reduce not only the installation space but also internal pipe length of your manifold by making it possible to mount at 6mm intervals.
- Capacity for Bilateral Connection
Easy to make manifolds
- Small Internal Volume
Only 10 micro liters (each port)
- Excellent Chemical Resistance
PEEK molded body and Perfluoroelastomer diaphragm
|
|
The Valves offer an adjustable pilot set point of 0.5 to 100 PSI. Normally open or normally closed valves are available; the valve pressure range is 22 to 116 PSI. Four mounting styles are available: Flush Mount, Manifold Mount, Panel Mount, and Pipe Threaded.
Vacuum Piloted Valves are also available.
|
|
All the of the benefits of Clippard quality and reliability are now available in these 10 & 15 mm valves. Offered in both Normally Open or Normally Closed models, these 2- and 3-way valves are perfect for small and compact areas where pneumatic controls are needed.
This series has a high strength, light-weight engineered glass filled nylon body, along with stainless steel, copper and Buna-N, making it suitable for a broad range of applications. With exceptional life and reliability this is the perfect sub-miniature valve for tomorrow's needs in a wide variety of industries.
|
|
Less is more: compact Performance individual valves CPE, space saving and light weight for close proximity to or on the individual drive.
• Width 10 ... 24 mm
• Flow rate up to 3,000 l/min
• Voltage 24 V DC, 110 V AC, 230 V AC
|
|
Extremely small, extremely fast, extremely versatile: MH1 Miniature valves for powering miniature drives or as pilot valves for process valves. Switching status indicated by means of LED. Can be mounted on printed circuit boards.
• Width 10 mm
• Standard nominal flow rate 10 ... 14 l/min
• Voltage 5/12/24 V DC
• Switching times from 8, 5 or 4 ms
• Pressure range -0.9 ... 8 bar
• Protection class IP40
|
|
Applications:
Mechanical industries, robots, ink-jets, textile machines, dental units, medical units, instruments, pilot valves for solenoid valves, vacuum technologies, etc.
|
|
|
|
|
|
The PV-1 Miniature Pneumatic Diaphragm Valve is designed for use in high purity semiconductor applications, and is also ideally suited for ultra-pure water and aggressive chemical systems. The design utilizes a machined modified PTFE body, seat and diaphragm ensuring excellent flexibility and long life. The valve is available in 2 and 3 way configurations. It is ideal for low flow and small dose injection applications.
FEATURES:
* Precision machined diaphragm manufactured from the latest technology modified PTFE. Provides over five times the flexural life as compared to conventional PTFE. Tongue and groove seal for positive diaphragm to body seal. Benefits are high cycle life, lower replacement costs, less downtime and isolates media from actuator.
* Compact design allows for ease of installation and maintenance.
SPECIFICATIONS:
Materials of Construction:
* Wetted Surfaces - PTFE, Modified PTFE
* External Surfaces - PFA, PVDF
* Other Materials - Anodized Aluminum, SS, Nitrile
Pressure Ranges:
* 25” Hg vacuum (846 mbar) to 20 PSIG (1.4 bar)
* Actuator - 20 PSIG (1.4 bar) to 120 PSIG (8.3 bar)
* Pressure ranges above are for operation at ambient temperature
Temperature Ranges:
* -60° - 212° F (-51° - 100° C) Ambient
* -60° - 400° F (-51° - 204° C) Fluid
|
|
Versatility is the key when it comes to Clippard's Minimatic Modular Valves. Available in an unlimited variety of directional, flow, pressure and special control valves - each in a valve body designed to mount and link together with a simple piping system. The piping system eases assembly and plumbing, resulting in reduced labor costs, errors in installation, and the potential for plumbing leakage.
In addition, multiple valve elements can be contained in a single body; providing incredible flexibility and variety to accomplish a myriad of control challenges. The Minimatic Modular Valves are the supreme "Plug & Play" devices for pneumatic applications.
|
|
Model number YTV-2-1/4
Dimensions (mm) W40 x L50 x H77
Type 2way-NC
Orifice Diameter (mm) 3
Port Connection Rc1/4
Inlet Pressure (kPa) -100 - 150
Outlet Pressure (kPa) 0 - 30
Ambient Temp. Range 0 - 60
Fluid Temp. Range 0 - 60
Voltage (V) 100AC
Power Consumption (W) 5
Operating Duration Continuous Duty
Insulation Class E
Body Material PTFE
Seal Material PTFE
|
|
|
Nickel plated fittings provide service under harsh conditions for many years to come. The lustrous finish will enhance the appearance of any machinery and add a glow of quality. Nickel plated fittings come with pre-applied thread sealant to save installation labor.
|
|
Standard valves with lateral Namur port pattern per VDE/VDI 3845. These solenoid valves are used with pneumatic drives with Namur port pattern in process automation applications.
- Flow rate: 1300 l/min
- Connection: G1/4
Voltages
- 12, 24, 42, 48 V DC
- 24, 42, 48, 110, 230, 240 V AC
- Electrically actuated valves
- 3/2-way valve
- 5/2-way valve
- Single solenoid with mechanical spring return
- Manual override
- Without solenoid coil and plug socket
- Standard plug
Features
- Simple flange mounting to DLP (COPAC) and DRD, DRE (COPAR) drives
|
|
Product Details
3/2 and 5/2 - 3/2 convertible solenoid valve
Working Pressure up to 20 bar
Body Material: AL, BR, SS
poppet and spool design
• Suitable for Direct mounting on Pneumatic actuators, Control valves etc.
• 3 Port versions for Spring Return Actuators.
• 5 Port versions for Double Acting Actuators.
• Mounting as per NAMUR.
• Conversion plate available for converting 5 Port to 3 Port Solenoid valves.
• Orifice: 2.2 mm - 6mm
• Pressure: 0 - 20bar (Direct Acting)
• Pressure: 1 - 10 bar (Pilot Operated)
• Manual Operation provision available
• Explosion Proof Solenoid enclosure (ATEX, CCOE, DGMS, CMRI, INMETRO approved)
• Weather Proof solenoid Enclosure (IP 67) with/ without Terminal Box
• Body Material: Hard Anodized Aluminum, Brass and SS316
• Latching, Manual Reset, Intrinsically Safe, Low power solenoid options available
• 3/2, 5/2, 5/3 Center Exhaust, 5/3 Center off etc options available.
|
|
ASCO/ JOUCOMATIC has developed several pneumatic spool valve island concepts :
* Monobloc subbase concept (Generation C, ISO 1,2 islands, ISO 01, 02 islands)
* Modular concept (Compact 8)
Compact 8 is the smallest spool valve island to get up to 300 l/min for your pneumatic cylinders or actuators
Version available : Multipol, Profibus-DP, Inetrbus-S, DeviceNet, ASI, CANopen, Modbus, FIPIO
|
|
|
|
|
|
Why a new distribution mode?
Because it meets all your requirements in terms of installation costs, communication, performance (high capacities) and ease of implementation.
Very attractive installation costs
When several islands coexist, were you aware that the cost of installing them is closely related to the machine's wiring architecture?
This a very important point: thanks to a substantial reduction in the number of components such as terminal boards, distribution units, cables, raceways and wiring, both the implementation and the maintenance of the installation as a whole become highly cost-effective.
The 2000 series islands consist of a subbase, which includes the electrical and pneumatic valves into which the distributors are plugged ("Plug in" technology).
Efficient, advanced and highly flexible architecture
It is very easy to optimise the fieldbus: a single connection on the master island is sufficient for the control engineer to establish:
- Communication from the fieldbus of his choice: PROFIBUS-DP, INTERBUS-S, AS-Interface, DeviceNet, Modbus-IDA, WorldFIP, ControlNet, AB 1771 RIO, not forgetting EtherNet/IP
- A single address for up to 7 islands, which can have different flow rates, thereby taking advantage of optimized PLC memory and network cycle time.
- A capacity of 224 monostable or 112 bistable or dual valves
- In total: 96 inputs (sensors, pushbuttons etc), 224 digital outputs, be they digital (including coils) and/or analog, connected via M12, Sub-D or terminal boards
|
|
Our product range for pneumatic automation
The range of products varies from singular or aligned solenoid valves to field bus controlled decentralised I/O-Systems with electrical and pneumatic I/O's
|
|
HF04 XF available in versions, 5/2, 5/3 CF and 2 x 3/2 NO, NF and NO/NF.
Flow : 400 Nl/min.
Various options of electrical connections.
Swiveling pneumatic fittings.
Multiple accessories.
|
|
CPV valve terminal
Compact, rugged and extremely high performance!
Features:
- Flow rate: CPV10: 400 l/min
CPV14: 800 l/min
CPV18: 1600 l/min
- Valve width: CPV10: 10 mm
CPV14: 14 mm
CPV18: 18 mm
- Cubic design for exceptional performance and low weight
- Highly flexible thanks to various pneumatic functions (valve variants), different pressure ranges, vacuum switches and the possibility of integrated vacuum generation
- Separator plates for the formation of pressure zones
- Blanking plates for future expansion
- LED displays
- Manual override for valves
-Low installation and bus connection costs
- Protection up to IP 65
- Flexible and cost-effective connection of 2 to 8 valve slices
- Decentralised machines and system structures, for example in the areas of handling and conveyor technology, in the packaging industry, in sorting equipment and at upstream machine functions
|
|
Type 14 valve terminals for VDMA valves are of modular design and can be equipped with 2 to 16 valves in accordance with VDMA 24563 / ISO 15407-1. Fewer valves may also be installed, in which case vacant positions are sealed with blanking plates.
The valves include individual connection with an M8 central connector or standard pattern.
The valve terminals include common supply ports and exhausts for all valves. The bus lines can be connected to the end plates, or via adapter plates. Combining of sizes 02 and 01 is possible.The valve terminals are configured, assembled and tested for correct functioning in accordance with customer requirements. This results in minimal installation time.
Variants
- Size 01: 26 mm valve width, flow rate of 1000 l/min.
- Size 02: 18 mm valve width, flow rate of 500 l/min.
- Equipped with 2 to 16 valves
- Individual connection
- Standard voltage: 24 V DC
- Other voltages are possible (12 V DC, 24 V AC, 110 V AC and 230 V AC)
|
|
|
|
|
|
Why a new distribution mode?
Because it meets all your requirements in terms of installation costs, communication, performance (high capacities) and ease of implementation.
Very attractive installation costs
When several islands coexist, were you aware that the cost of installing them is closely related to the machine's wiring architecture?
This a very important point: thanks to a substantial reduction in the number of components such as terminal boards, distribution units, cables, raceways and wiring, both the implementation and the maintenance of the installation as a whole become highly cost-effective.
The 2000 series islands consist of a subbase, which includes the electrical and pneumatic valves into which the distributors are plugged ("Plug in" technology).
Efficient, advanced and highly flexible architecture
It is very easy to optimise the fieldbus: a single connection on the master island is sufficient for the control engineer to establish:
- Communication from the fieldbus of his choice: PROFIBUS-DP, INTERBUS-S, AS-Interface, DeviceNet, Modbus-IDA, WorldFIP, ControlNet, AB 1771 RIO, not forgetting EtherNet/IP
- A single address for up to 7 islands, which can have different flow rates, thereby taking advantage of optimized PLC memory and network cycle time.
- A capacity of 224 monostable or 112 bistable or dual valves
- In total: 96 inputs (sensors, pushbuttons etc), 224 digital outputs, be they digital (including coils) and/or analog, connected via M12, Sub-D or terminal boards
|
|
Camozzi offers a large range of valves and solenoid valves with varying dimensions for use in different types of equipment. The components have been produced for single use and for mounting on manifolds or sub-bases, and each size has been designed to give the most effective performance possible.
A large number of voltage and coil options are available within the solenoid range satisfying most requirements.
|
|
|
|
Pneumatic electrovalves, Pneumatic valves
