|
|
ISO-Standard ISO 5599/I (Series W60, W63, W64)
ISO 5599/II (Series W65)
ANSI-Standard (Series W70 and W74)
SAE-Standard (Series 80 and 84)
All piping is to the base, not the valve, for easy valve removal and servicing.
Other features:
Three constructions available:
poppet
stainless steel spool & sleeve
resilient seal spool
Valves are fully interchangeable with any other valves using a standard mounting interface
Compact design (manifold mounting system)
5/2- and 5/3-way valves in all sizes available
Port size up to G 1½
Flow rating up to kv = 22
Electrical connections provided by:
drop-cord plug (ISO 5599/I)
body-to-base / plug-in base (ANSI or ISO 5599/II)
3- or 5-pin connectors (SAE-Norm)
Variety of interposed control devices available.
|
|
|
The fine threads of the needle valve permit excellent adjustment for precise control of flow. The flow is restricted in both directions and is adjustable from 0 to the equivalent flow of a 0.025" diameter orifice. The 7-turn adjustment needle valves are available in two models, the standard model and the fine adjustment model. The standard adjustment model has a pin angle of 6° with 10-64 threads; the fine adjustment model has a pin angle of 4° with 10-80 threads.
|
|
Connection guaranteed: a wide range of functions and variants - always harmonised to the respective requirements.
• Exhaust air/supply air flow control or without non-return function
• Flow rate 15 ... 4,300 l/min
• Threaded connectors M3 ... G3/4
• Push-in fittings QS3 ... QS 12 or PK-3 ... PK-6
• Variants with increased corrosion resistance
|
|
|
Angle Flow Control valves are designed to provide accurate flow control in a compact, labor saving package. Features like built in push-in fittings, pre-applied thread sealant, convenient swivel design and unique needle design all add up to a package that will save time, money and energy when accurate control is needed on pneumatic actuators.
|
|
LS-V05C
Proportional Pneumatic Control Valve
The LS-V05C is an enhanced version of the LS System proportional, directional control pneumatic valve for high performance applications such as medical equipment, test & measurement systems, advanced automation and animatronics. The valve is designed to be paired with Enfield Technologies driver or controller/driver electronics such as the LS-C10, LS-C41, and C2s.
Features:
* Proportional
* High Speed and Flow
* Whisper Quiet
* Vacuum Capable
* High Linearity
|
|
General Description
Uni-directional
316 Stainless Steel or Brass in-line flow regulators for uni-directional operation (free flow return).
Bi-directional
316 Stainless Steel or Brass in-line flow regulators for bi-directional operation (separate flow control in each direction).
Operating Fluids
- Gases
Filtered lubricated or non-lubricated air, inert gas, sweet (natural) gases.
Sour gas option available
- Liquids
Low pressure hydraulic, mineral oil or water.
|
|
|
The unique design of the Modular Manifold block allows it to be used as an individual unit or assembled into a modular combination of pneumatic components. Two models are available, filtered and non-filtered. The manifold block contains four individual dovetail slides and one top cover that will accept a various assortment of threaded or push-in ports.
|
|
Custom-built manifolds assembled with valves can be factory assembled to exact customer requirements. Through-holes in the manifold body permit mounting upon the rear surface. For DIN rail mounting, the DIN rail kit should be ordered (optional)
FEATURES
- High durability extrusion
- Mounting via through-holes or optional DIN rail kit
- Accommodates up to 16 valves
- Pilot supply ports internally connected
|
|
Type : Material : Hardness : Surface Treatment RoHS
BMRAC 5052 Aluminum Alloy - - Compliant
BMRACT 5052 Aluminum Alloy - - Compliant
BMRACA 5052 Aluminum Alloy - Clear Anodizing Compliant
BMRACAT 5052 Aluminum Alloy - Clear Anodizing Compliant
BMRACP 5052 Aluminum Alloy - - Compliant
|
|
The spool valves and mini spool valves are available in ISO 1,2,3,4 and ISO 01,02 standardized and non-standardized versions. With pneumatic or electropneumatic control (integrated or via CNOMO pilots), they provide an extended service life of 30 million cycles.
The non-standardized versions give priority to:
- High size/throughput ratio
- Assembly in line or on multiple subbases
|
|
|
Pneumatic distributor TC08: 800 Nl/min 5/2, 5/3 in G1/8. 800 Nl/min. Direct connection or associable DIN C or M8. Is appropriate for all the applications. Pneumatic distributor TC15: 1500Nl/min 5/2, 5/3 in G1/4. 1500 Nl/min. Direct connection or associable DIN C and M8. Is appropriate for all the applications. Great flow.
|
|
Modular Manifold
10-32 & 1/8 NPT 2, 3 & 4 Way Valve Series 3853
Composite Solenoid Valve, 2 & 3-Way
Normally Closed or Normally Open
Hex Body
1/8 & 1/4 NPT 2 & 3 Way Valve Series 38MP
Composite Solenoid Valve, 2 & 3-Way
Normally Closed or Normally Open
18 Series
1/8 NPT 2, 3, & 4 Way Valve Series 3953
Stackable Composite Solenoid Valve
14, M14 & 34 Series
1/4 & 3/8 NPT 2, 3 & 4 Way Valve Series 3500
1/4, 3/8 & 1/2 NPT 2 Way Normally Closed/Open
12, 12A, 12B & 38 Series
3/8 & 1/2 NPT 2, 3 & 4 Way Valve Series 3510
1/4, 3/8 & 1/2 NPT Composite 2 Way Normally Closed/Open
|
|
The spool valves and mini spool valves are available in ISO 1,2,3,4 and ISO 01,02 standardized and non-standardized versions. With pneumatic or electropneumatic control (integrated or via CNOMO pilots), they provide an extended service life of 30 million cycles.
The non-standardized versions give priority to:
- High size/throughput ratio
- Assembly in line or on multiple subbases
|
|
5/2, 5/3 in G1/4. 1500 Nl/min.
Direct connection or associable DIN C and M8.
Is appropriate for all the applications. Great flow.
|
|
5/2, 5/3 in G1/8. 800 Nl/min.
Direct connection or associable DIN C or M8.
Is appropriate for all the applications.
|
|
|
Metal Work offers a full range of valves and solenoid valves to meet all the possible requirements regarding compressed air supply, cut-off and regulation. The range of conventional valves with in-line couplings is available in four different types of actuation: mechanical, manual, pneumatic and electro-pneumatic. Standard valves come with either pneumatic or electro-pneumatic actuation. A comprehensive range of accessories including bases, manifolds and adaptors makes this valve range extremely versatile. All solenoid valves can be equipped with low power absorption solenoids. A new type of Mini Valve serie Mach is available with multiple electrical connector as well as the provision for interconnection with fieldbus systems.
|
|
2005 Series
Modular reality, plug together flexibility in design! 4-way solenoid air pilot actuated valves. Available in manifold & base mount. Supported electronic interface/bus protocols include DeviceNet, Allen-Bradley, Remote I/O and Profibus DP.
2012 Series
Modular reality, plug together flexibility in design! 4-way solenoid air pilot actuated valves. Available in manifold & base mount. Supported electronic interface/bus protocols include DeviceNet, Allen-Bradley, Remote I/O and Profibus DP.
2035 Series
Modular reality, plug together flexibility in design! 4-way solenoid air pilot actuated valves. Available in manifold mount. Supported electronic interface/bus protocols include DeviceNet, Allen-Bradley, Remote I/O, and Profibus.
|
|
A05/A12 ADEX VALVES
Miniature high flow body ported and manifold valves
5/2 and 5/3 configurations
Ultra fast response times
10mm and 15mm Body widths
Threaded or push-in connections
Single sub base or IEM manifolds
Low power solenoids
Collective wiring system
|
|
SX
The SX series unique design combines both solenoid assemblies (when using double solenoid 2/3 position) on the same side of the valve, opposite the ports, allowing for greater space savings and simplified wiring access. The SX series valves are available with numerous manifold options which allow for easier installation and improved operation.
|
|
|
Series mini-distributor LS04 M8 Connector industry, Ø4 connection, Ø6 XS 30 gr. 200 Nl/min AF 51 gr. 330 Nl/min Systems compact carry-distributor VTS LS04 330 Nl/min
|
|
|
|
|
|
2002 Series Valve
Modular reality, plug together flexibility in design! Sub-miniature 3-way and 4-way solenoid air pilot actuated valves. Available in manifold & base mount. Electronic interface options include DeviceNet, Profibus-DP, 1771 Remote I/O, and DeviceLogix.
Standard Specifications:
Cv: 0.20 to 0.25
Port Sizes: 1/8 NPTF, 4mm, 6mm
5 ported, 2 & 3 position, 4 way
Flow Capacity: 11.5 SCFM @ 80 PSIG / 246 NI/m @ 6 bar
Operating Pressure Range: 28" Hg. Vacuum to 150 PSIG / Vacuum to 10 bar
Pilot Pressure Range: 35 to 115 PSIG / 2.5 to 8 bar
Temperature Range (Ambient): -10°F to 115°F / -23°C to 46°C
2004 Series Valve
Modular reality, plug together flexibility in design! Miniature direct solenoid and solenoid air pilot actuated valves. Manifold mounting with DIN rail option. Electronic interface options include DeviceNet, Profibus-DP, 1771 Remote I/O, and DeviceLogix.
Standard Specifications:
Cv: 0.35 to 0.40
Port Sizes: 1/8 & 1/4 NPTF, 4mm
Flow Capacity: 16 to 18 SCFM @ 80 PSIG / 345 to 394 NI/m @ 6 bar
Operating Pressure Range: 28" Hg. Vacuum to 150 PSIG / Vacuum to 10 bar
Pilot Pressure Range: 20 to 115 PSIG / 1.5 to 8 bar
Temperature Range (Ambient): -10°F to +115°F / -23°C to +46°C
|
|
|
The Type 200 Precision Air Relay is a pilot operated, multi-stage 1:1 relay with a positive and negative bias adjustment capability. It accurately reproduces a signal pressure plus or minus the bias setting with consistent reliability. Output control and stability are maintained through a high gain servo balanced control mechanism which is activated by a highly sensitive stainless steel measuring capsule.
|
|
Features
* Adjustable from 30:1 dividing ratio to 1:30 multiplying ratio.
* Venturi aspiration system.
* Optional input and output biasing.
* Floating seal ring isolates control chamber.
* Panel or Line Mounting
Benefits
* Assures infinite pressure adjustments.
* Compensates for downstream pressure losses.
* Allows versatility in applications.
* Increased stability by reducing effect of high flows.
* Easy installation and service in the field.
|
|
|
|
|
|
Indirectly actuated valve series with manually and mechanically actuated valves.
- Flow rate: 120 l/min
3/2-way valve
- Normally closed or normally open
4/2-way valve
- Minimal actuating force with pilot control
- Can also be used as 2/2-way valve by plugging the exhaust.
- 4 actuator types: stem, roller lever, idle return roller lever, whisker
Normally closed or normally open by turning the housing top:
VS, RS, LS
Normally closed, actuator attachment at left (number 1 on attachment above number 1 on housing)
VOS, ROS, LOS
Normally open, actuator attachment at right above number 2
This whisker valve with extremely low actuating forces is particularly well suited for units where dissimilar parts or actuating elements without precision positioning need to be sensed, or where the actuating levels are different. The whisker can be approached from any direction perpendicular to the whisker axis, or can be passed.
- Mounting bracket HV-1/8
Scope of delivery: 1 mounting bracket, 2 M5x25 socket head screws per DIN 912, 2 hex nuts and spring washers
Can be repaired with wearing parts kit
|
|
This spring-loaded safety valve with a very high blow-off capacity, labeled as D/G (models 352.00 to 352.30), will be used for protection of
pressure vessels and pressure systems for air and other neutral, non-toxic and non-combustible gases.
This design allows a usage to secure fixed pressure and vehicle tanks from dust and granular goods.
The valves only can be supplied with a preset pressure, the desired set pressure must be specified with the order. After setting, the valves are
labeled and sealed.
For functional testing, the safety valve can be opened by turning the knurled screw.
The bearing surfaces and seals can be cleaned from impurities by unscrewing the upper part without changing the pressure setting.
Repairs may only be executed by the manufacturer.
|
|
|
|
|
|
|
Offering W60 Series, W68 and W88 Series, W80 Series, and W90 Series Single Seat Pneumatic Valves. WCB W60 series is a modular family of valves that are the ultimate in: easy cleaning, high pressure, low maintenance design. With 16 standard bodies, 12 different actuators, 5 stem types, and a wide range of control tops, the valves can be configured to precisely fit any application. The W68 and W88 Series consists of a modular family of "throttling or pressure control" valves that are the ultimate in: easy cleaning, high pressure, low maintenance design. With 11 standard bodies, 12 different actuators, 4 stem types, flush or standard adaptor, and a wide range of control tops, the valves can be configured to precisely fit any application. The W80 is a great solution for aseptic applications, this valve series utilizes a stem flush adapter to provide a liquid or steam barrier around the valve stem. When the product must be isolated from the external environment, the W90 Series valve is an ideal choice. This series valve utilizes a diaphragm adapter to provide a reliable, hermetic seal around the valve stem.
|
|
General Description
John Guest acetal shut-off valves have a brand new full bore mechanism and are especially designed for the Brewing and Soft Drinks industries and for potable water. They are also suitable for air and inert gases such as N2/CO2 provided they are installed in accordance with the UK Brewers and Licensed Retailers Association Code of Practice or similar industry/government safety guidelines.
The range includes valves with short and long handles to operate a 1/4 turn on/off action. The valves are available with or without mounting clip.
Materials of Construction
This fitting is made of the following components:-
* The body is produced in acetal copolymer
* 'O'Rings are nitrile rubber
* The collet is produced in acetal copolymer with stainless steel teeth
* The handle is produced in acetal copolymer
|
|
Maximatic FRLs condition and prepare compressed air for use in fluid power systems. Pneumatic applications with properly conditioned air will operate longer, cost less and improve system efficiency. Clippard offers five different sizes from #10-32 to 1 NPT of Filter, Regulators, Lubricators and combination units. Their modular design and interconnecting brackets provide flexibility and facilitates simple field installation and/or modification.
Clippard's all-new Maximatic Solenoid valves are available in 2-,3- and 4-way configurations in port sizes from #10-32 to 1/2" NPT. Select either a direct-acting poppet or solenoid-controlled pilot operated balanced spool design. These electronic valves offer high flow in small package, and are constructed of aluminium, stainless steel and thermoplastic materials.
|
|
The all-rounder. Tried and tested a million times the world over: comprehensive range with 5/2- and 5/3-way valves.
• Flow rate up to 2,000 l/min
• V solenoid coil: low power consumption
• F solenoid coil: ex-protection, freely selectable voltage
• Side or front mounting
|
|
|
|
Pneumatic electrovalves, Pneumatic valves
