|
|
|
|
|
|
The Pneumatic Solenoid Valves 720 Series are available in both NC and NO version. They include all innovations, which are present in Matrix solenoid valves, both in materials and operating principles.
They couple simplicity and reliability with high dynamic performance. Response times are of milliseconds range, while their operating life is over 500 million cycles. The Series comprises Vacuum versions designed for uses with vacuum technique.
Due to the facility to be speed-up controlled,dynamic characteristics become even more improved: standard solenoid valves equipped with 24 VDC control present response times lower than 5 ms in opening and 2 ms in closing, with a maximum operation frequency 200 Hz. On the contrary, solenoid valves equipped with speed-up control present a response time both in opening and closing lower than 2 ms, with a maximum operation frequency 300 Hz.
Besides high-speed characteristics, solenoid valves 720 Series offer flow rate value to 100 l/minute (ANR), with supply pressure from 0 to 8 bar.
720 Series is available both in line assembly version and on sub-plate and is equipped with a range of accessories such as multi-position manifolds and speed-up driver boards.
|
|
2, 3 port valve
4S1 series
4.5
M(D)3SA1
46
(small pneumatic valve)
M3GA
156
4G series
4.0 to 16
MN3GA
248
Pilot operated
soft spool valve
MN3S0
4.0
MN4S0 series
368
One side solenoid type
MT3S0
3.0
4K series
M3KA
516
M3MA0
3M series
0.1 to 0.5
686
(small pneumatic valve)
M3MB0
Direct acting
poppet valve
M3PA
1.9 to 5.4
3P series
710
M3PB
B * P51
742
Pilot operated
P/M/B series
0.45 to 0.84
poppet valve
(miniature pneumatic valve)
N * P512/3/4
746
|
|
|
These 3/2-way normally closed valves in base-mounting design are available as a complete Series in Sizes 4, 8, 12 and 30 (outlet ports G 1/2 to G 2, on both sides for more piping flexibility). valves offer the design features of the well-proven ROSS poppet valve technology and fully comply with the relevant criteria of DIN EN 692 as well as DIN EN 954 (Cat. 3 and 4). The valves provide dynamic, cyclic and internal monitoring during each actuating and de-actuating movement. DM2™ valves have been approved by Deutsche Berufsgenossenschaft (BG-PRÜFZERT, MHHW, Cert.-No.s 06 008 / 06 021).
|
|
|
Directional control and failsafe function in valve actuator circuits in corrosive and hazardous environment. 3/2 direct operated solenoid valves available in two versions: A/ Normally closed (U131 types) - NAMUR interface for direct adaptation to the actuator including integrated flow regulators. B/ Universal (U133 types) with NPT 1/4 pipe connection and also with Manual Reset function (U033X types).
|
|
|
|
|
|
750 Series 3/3 presents a small-sized single body with four utilities, assuming, according to the different models, the following configurations:
In the present model, all the innovations offered by Matrix technology, this combines special dynamic performance to the simplicity and reliability of manufacture, are present. Response times are of millisecond range, while operation life is over 500 million cycles.
With a speed-up kind control, dynamic characteristics are even more improved. Standard 24 VDC control solenoid valves have a response time lower than 5 ms in opening and than 2 ms in closing, with a maximum operation frequency 200 Hz. Speed-up control solenoid valves have a response time lower than 2 ms both in opening and in closing, with a maximum operation frequency of 300 Hz.
Besides high-speed characteristics, 750 Series solenoid valves offer flow rate values up to 100 l/minute (ANR) for every single outlet, with feeding pressure from 0 to 4 bar.
For 750 closed centres series, a lot of accessories is available, such as IP 52 or IP 65 connectors, manifolds with different positions and speed-up driver boards.
|
|
LS-V15C
Proportional Pneumatic Control Valve
The LS-V15C is an enhanced version of the LS System proportional, directional control pneumatic valve for high performance applications such as medical equipment, test & measurement systems, advanced automation and animatronics. The valve is designed to be paired with Enfield Technologies driver or controller/driver electronics such as the LS-C10, LS-C41, and C2s.
Features:
* Proportional
* High Speed and Flow
* Whisper Quiet
* Vacuum Capable
* High Linearity
|
|
NAMUR MOUNT 4 WAY PNEUMATIC VALVES (VAP)
PIPE MOUNT 4 WAY PNEUMATIC VALVES (VAP)
SUB BASE MOUNT
316L STAINLESS STEEL 4 WAY PNEUMATIC VALVES
|
|
Clippard clear acrylic pneumatic circuit boards are designed to provide a compact and highly efficient pneumatic control system, with the use of Clippard modular components and other Clippard products.
Many valving systems require a considerable amount of piping, tubing and fittings to create the necessary circuitry. The piping originates beneath the valve and often needs extra space and clearance to complete. The acrylic circuit board provides a place to mount the components and easy methods to hook-up the circuit, generally on the top side of the circuit board.
For a single circuit the original assembly method can be the best direction to take ....but where a number of identical circuits are prepared, the acrylic circuit board technology offers a series of distinct advantages.
|
|
|
Camozzi has not neglected the importance of these valves especially as actuator performance depends essentially on the right choice of automatic valve. The range includes flow regulators, quick release valves, flow control valves, basic logic functions and silencers with different specifications in order to meet most requirements.
|
|
All EV-,ET- and EC-series electronic valves with the "O-" option are available manufactured and assembled for use in Oxygen-enriched environments for applications that are extremely sensitive to contamination.
These valves are ultrasonically cleaned, assembled, inspected and tested in an enclosed controlled area with a state-of-the-art positive pressure filtration system.
Both organic and inorganic contaminants such as particulate matter and hydrocarbon oils are removed.
No organic sealants, adhesive or lubricants are used in the manufacturing process.
Feature FKM (fluorocarbon) seals.
Components parts are lubricated with Oxygen-compatible PFPE (perfluoropolyether) grease, only as needed for assembly.
Individual testing and inspection is accomplished utilizing compressed Nitrogen and ultraviolet light.
Products are double bagged in heat-sealed polyethylene bags.
|
|
Reduced format - optimised flow - clean design: a fixed-grid valve terminal for the electronics and mechatronics industry. With a maximum of 16 manifold integrated valves in a 10 mm fixed grid.
• Width 10 mm
• Valves: 5/2-, 5/2-way double solenoid, 5/3-, 2 x 3/2-, 5/3-, 2 x 2/2-, 1 x 3/2-way with external air supply
• 4, 8, 12 or 16 valve positions
• Pressure range -0.9 ... 7 bar
• Standard nominal flow rate 170 l/min
• Fieldbus connection DeviceNet
• Protection class IP40
|
|
Flow rates: 360 to 700 l/min
Widths: 10 and 20 mm
Variability: flexible compressed air supply, variable pressure zones, additional supply at any desired location.
Serial valve actuation - up to 32 valve positions or 64 solenoid coils
Open for Profibus-DP, Interbus, CANopen, DeviceNet, CC-Link
Pressure range: -0.9 to 10 bar
Protection: IP 65
Electrical I/Os and fieldbus connection with modular, electrical CPX terminal
|
|
|
Direct and pilot operated. DIRECT have the solenoid armature directly connected to the valve spool or poppet. PILOT use small integral direct solenoid valves to switch pilot air pressure to operate the main valve element.
|
|
Description
Corning Cable Systems distribution blocks of Series 5000 (8- and 10-pair functional elements are fitted with double IDC contacts and with and without option for protection) are used for both voice and data networks in the central office, cabinets and in private networks applications.
|
|
|
|
|
|
TORK PULSE VALVES,DUST BAG SHAKER VALVES,DIAPHRAGM VALVES.
DUST BAG COLLECTOR VALVE,
T-P Series Pulse valves gives high pressed air shock to bag filter in a short time, .
Pulse valves are two way and works like others solenoid valves. But they do not gives countinous flow.
Pulse valves are controled by electronic timer signal .timers gives signal in short time to each pulse valves.
applications:
air,dust bag filter,bunkers,dust extractor,electro static dying cabinnets filters,dust collector systems.
PULSE VALVE SERIES:
T-P Serisi ; integral control pulse valves,including coil unit 3/4"....up to 3" sizes.
working pressure:5...10 bar .
T-PB Serisi : remote control, (without coil unit) sizes.3/4"...up to3" .
T-PR Serisi : Coupling connection integral control, (without coil unit)pulse valve.
T-PRB Serisi : remote control,Coupling connection,diaphragm valve.
T-PF Serisi : Flange connection,integral control pulse valve.
T-PFB Serisi : remote control Flange connection, pulse valve
T-PUK Serisi : remote control solenoid group box,solenoid enclosure.
T-PZR Series : Pulse valve timer.
T-VFI ,T-VF2 : Vibro flow shaker
|
|
Features
* High Flow Capacity of 100 SCFM (170 m3/HR).
* Output pressure displays in psig, BAR, kPa, or user-defined pressure units.
* Reverse acting capability for analog input and output signals.
* Select Current or Voltage mode for input signal.
* Independently adjustable PID?tuning coefficients.
* Fully functional keypad and display.
* Backlit Liquid Crystal display screen.
|
|
|
The CL03: Food specific VTS. 5/2, 5/3 and 2x3/2 Flow: 700 Nl/min With possible filtration 5µm. Piloting by BUS. Hygienic design, resists the chemicals (washing with detergents for example) Ideal for the food applications.
|
|
|
Series 581: poured 3/2, 5/2, 5/3 Flow 250 with 6000Nl/min. ISO sizes 1, 2, 3 and 4. >50 million cycles. Broad range of flow. Electric drive or pneumatic. Model with connector industry DIN forms A and M12.
|
|
|
The CD01 available in version 3/2, 5/2, 5/3 in DN4. Flow: 650 to 1.010 Nl/min. ISO standard 15407-1. Compact with a very high flow. Many options of electric connections.
|
|
HF03-LG high flow 700Nl/min. All functions of distributor: 2x3/2, 5/2 and 5/3 Piloting: multipôle or drunk
-> Modular
-> High flow
-> Weak weight
-> Compact and robust
|
|
- Standard Version or ATEX
- Pressure 0 to 10 bars
- Valves with cde manual:
Specific BP 22 and 12 mm, +leviers
- Mechanical End of the road with cde or air blast
- Detector of pressure ((manostat, pressure controller, vacuostat)
- Data processing:
Logical cells (OR, AND, NOT, YES,...)
Timing relays
Meters
Generators of impulse
Indicators
Sequencer
- Mini-distributer 3/2, 4/2
- Mini-electromagnetic sluice gates 3/2 NF, NO, 1 W
- Order Bi-manual
|
|
Even the smallest components can contribute significantly to the efficiency and economy of whole systems. Valves from HOERBIGER-ORIGA are a perfect example of this:
S9 - robust and heavy duty modular valves: The S9 range of standard and special valves are designed for durability, versatility and efficiency for the most diverse pneumatic requirements.
Reliable, maintenance-free and long-lasting: The S10 valve series represents compact precision which is also economical.
|
|
555 Series
The Humphrey Series 555, 565 and 575 Electro-pneumatic Valve and Sensor Systems are complete valve/wiring/plumbing solutions designed exclusively for pneumatically actuated accumulation-type conveyors. Use with common photo-electric sensors to electrically operate pneumatic actuators controlling drive belts and carrier rollers. The 555, 565 and 575 replace sensor rollers and mechanically operated pneumatic systems with electronic controls and intelligence.
|
|
Series 581: versions 3/2, 5/2, 5/3
Flow 250 with 6000Nl/min. ISO sizes 1,2,3 and 4.
>50 million cycles. Broad range of flow. Electric drive or pneumatic. Model with connector industry DIN forms has and M12.
|
|
The CD01 available in version 3/2, 5/2, 5/3 in DN4.
Flow: 650 to 1.010 Nl/min.
ISO standard 15407-1. Compact with a very high flow. Many options of electric connections.
|
|
VTS ISO flow of 300 with 4.800Nl/min.
Version pluggin. ISO sizes 1-2-3.
Modular version HF04-03-02 and compacts CA04, LP04.
Connector industries multipôles M1 or SubD25, DRUNK Profibus, Interbus, Devicenet, Canopen, DLL, VDS or AS-I.
|
|
The CL03: Food specific VTS. 5/2, 5/3 and 2x3/2
Flow: 700 Nl/min
With possible filtration 5µm. Piloting by BUS.
Hygienic design, resists the chemicals (washing with detergents for example)
Ideal for the food applications.
|
|
PS1 ELECTRO-PNEUMATIC INTERFACE MODULES
High speed poppet type valves
3/2 and 4/2 electro-pneumatic modules
Push-in connections 4mm or 6mm
High performance 15mm solenoids
Building block type modules with DIN rail mounting
Built in electrical terminal blocks
|
|
A new range of distributers of metal power for a use under Xtrèmes conditions.
Technical description:
Available in four diameters of opening G1/8, G1/4, G3/8 and G1/2
Drawer of only one moulded aluminum part
Applications low temperature until -40°C
Operating pressure until to 16 bar.
Advantages:
Component count reduced
Optimal lifespan
Robustness
Versatility
High efficiencies and small overall dimensions
High flow
Short times of inversion
Minimal pressure of piloting.
Applications:
Forestry developments and mining, machines of building site,
Pulp mill and paper mills
In conformity with the standards vibrations pulverization saltworks in force in the transport sector.
|
|
|
|
Pneumatic electrovalves, Pneumatic valves
